[dpdk-dev] [PATCH v3 1/4] net/mlx5: add flow action functions to glue

Dekel Peled dekelp at mellanox.com
Wed Oct 10 09:41:58 CEST 2018


Thanks, PSB.
Note I'm replying here to comments from both emails you sent.

> -----Original Message-----
> From: Yongseok Koh
> Sent: Wednesday, October 10, 2018 3:36 AM
> To: Dekel Peled <dekelp at mellanox.com>
> Cc: Shahaf Shuler <shahafs at mellanox.com>; dev at dpdk.org; Ori Kam
> <orika at mellanox.com>
> Subject: Re: [PATCH v3 1/4] net/mlx5: add flow action functions to glue
> 
> On Tue, Oct 09, 2018 at 10:25:34PM +0300, Dekel Peled wrote:
> > This patch adds glue functions for operations:
> > - Create packet reformat (encap/decap) flow action.
> > - Destroy flow action.
> >
> > The new operations depend on HAVE_IBV_FLOW_ACTION_DV_SUPPORT.
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> > ---
> >  drivers/net/mlx5/Makefile    |  5 +++++
> >  drivers/net/mlx5/meson.build |  2 ++
> >  drivers/net/mlx5/mlx5_glue.c | 38
> > ++++++++++++++++++++++++++++++++++++++
> >  drivers/net/mlx5/mlx5_glue.h | 13 +++++++++++++
> >  4 files changed, 58 insertions(+)
> >
> > diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
> > index 92bae9d..474ad42 100644
> > --- a/drivers/net/mlx5/Makefile
> > +++ b/drivers/net/mlx5/Makefile
> > @@ -142,6 +142,11 @@ mlx5_autoconf.h.new:
> $(RTE_SDK)/buildtools/auto-config-h.sh
> >  		enum MLX5DV_FLOW_ACTION_TAG \
> >  		$(AUTOCONF_OUTPUT)
> >  	$Q sh -- '$<' '$@' \
> > +		HAVE_IBV_FLOW_ACTION_DV_SUPPORT \
> > +		infiniband/mlx5dv.h \
> > +		func mlx5dv_create_flow_action_packet_reformat \
> > +		$(AUTOCONF_OUTPUT)
> > +	$Q sh -- '$<' '$@' \
> >  		HAVE_ETHTOOL_LINK_MODE_25G \
> >  		/usr/include/linux/ethtool.h \
> >  		enum ETHTOOL_LINK_MODE_25000baseCR_Full_BIT \ diff --
> git
> > a/drivers/net/mlx5/meson.build b/drivers/net/mlx5/meson.build index
> > 6966248..d555c3c 100644
> > --- a/drivers/net/mlx5/meson.build
> > +++ b/drivers/net/mlx5/meson.build
> > @@ -96,6 +96,8 @@ if build
> >  		'MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP' ],
> >  		[ 'HAVE_IBV_FLOW_DV_SUPPORT', 'infiniband/mlx5dv.h',
> >  		'MLX5DV_FLOW_ACTION_TAG' ],
> > +		[ 'HAVE_IBV_FLOW_ACTION_DV_SUPPORT',
> 'infiniband/mlx5dv.h',
> > +		'mlx5dv_create_flow_action_packet_reformat' ],
> >  		[ 'HAVE_IBV_DEVICE_MPLS_SUPPORT', 'infiniband/verbs.h',
> >  		'IBV_FLOW_SPEC_MPLS' ],
> >  		[ 'HAVE_IBV_WQ_FLAG_RX_END_PADDING',
> 'infiniband/verbs.h', diff
> > --git a/drivers/net/mlx5/mlx5_glue.c b/drivers/net/mlx5/mlx5_glue.c
> > index 48590df..63fbab1 100644
> > --- a/drivers/net/mlx5/mlx5_glue.c
> > +++ b/drivers/net/mlx5/mlx5_glue.c
> > @@ -174,6 +174,17 @@
> >  	return ibv_destroy_flow(flow_id);
> >  }
> >
> > +static int
> > +mlx5_glue_destroy_flow_action(struct ibv_flow_action *action) {
> > +#ifdef HAVE_IBV_FLOW_ACTION_DV_SUPPORT
> > +	return ibv_destroy_flow_action(action); #else
> > +	(void)action;
> > +	return NULL;
> 
> And this should be
> 	return ENOTSUP;
> Return type mismatches, you'll see a compiler warning.
> 
> Thanks,
> Yongseok

Fixed.

> > +#endif
> > +}
> > +
> >  static struct ibv_qp *
> >  mlx5_glue_create_qp(struct ibv_pd *pd, struct ibv_qp_init_attr
> > *qp_init_attr)  { @@ -388,6 +399,30 @@  #endif  }
> >
> > +static struct ibv_flow_action *
> > +mlx5_glue_dv_create_flow_action_packet_reformat
> > +		(struct ibv_context *ctx,
> > +		 size_t data_sz,
> > +		 void *data,
> > +		 enum mlx5dv_flow_action_packet_reformat_type
> reformat_type,
> > +		 enum mlx5dv_flow_table_type ft_type) { #ifdef
> > +HAVE_IBV_FLOW_ACTION_DV_SUPPORT
> > +	return mlx5dv_create_flow_action_packet_reformat(ctx,
> > +							 data_sz,
> > +							 data,
> > +							 reformat_type,
> > +							 ft_type);
> > +#else
> > +	(void)ctx;
> > +	(void)data_sz;
> > +	(void)data;
> > +	(void)reformat_type;
> > +	(void)ft_type;
> > +	return NULL;
> > +#endif
> > +}
> > +
> >  alignas(RTE_CACHE_LINE_SIZE)
> >  const struct mlx5_glue *mlx5_glue = &(const struct mlx5_glue){
> >  	.version = MLX5_GLUE_VERSION,
> > @@ -414,6 +449,7 @@
> >  	.modify_wq = mlx5_glue_modify_wq,
> >  	.create_flow = mlx5_glue_create_flow,
> >  	.destroy_flow = mlx5_glue_destroy_flow,
> > +	.destroy_flow_action = mlx5_glue_destroy_flow_action,
> >  	.create_qp = mlx5_glue_create_qp,
> >  	.create_qp_ex = mlx5_glue_create_qp_ex,
> >  	.destroy_qp = mlx5_glue_destroy_qp,
> > @@ -437,4 +473,6 @@
> >  	.dv_create_flow_matcher = mlx5_glue_dv_create_flow_matcher,
> >  	.dv_destroy_flow_matcher = mlx5_glue_dv_destroy_flow_matcher,
> >  	.dv_create_flow = mlx5_glue_dv_create_flow,
> > +	.dv_create_flow_action_packet_reformat =
> > +
> 	mlx5_glue_dv_create_flow_action_packet_reformat,
> >  };
> > diff --git a/drivers/net/mlx5/mlx5_glue.h
> > b/drivers/net/mlx5/mlx5_glue.h index f6e4e38..071a650 100644
> > --- a/drivers/net/mlx5/mlx5_glue.h
> > +++ b/drivers/net/mlx5/mlx5_glue.h
> > @@ -46,6 +46,12 @@
> >  struct mlx5dv_flow_match_parameters;
> >  #endif
> >
> > +#ifndef HAVE_IBV_FLOW_ACTION_DV_SUPPORT struct ibv_flow_action;
> enum
> > +mlx5dv_flow_action_packet_reformat_type { type = 0, }; enum
> > +mlx5dv_flow_table_type { type = 0, };
> 
> This part still has an error.
> 
> 	In file included from ../drivers/net/mlx5/mlx5_rxq.c:38:0:
> 	../drivers/net/mlx5/mlx5_glue.h:55:2: error: redeclaration of
> enumerator ‘type’
> 	  type = 0,
> 	  ^
> 	../drivers/net/mlx5/mlx5_glue.h:52:2: note: previous definition of
> ‘type’
> 	was here
> 	  type = 0,
> 	  ^
> 

Fixed.

> You should've used different names. However, I have another suggestion.
> Let me speak with you offline.
> 
> Thanks,
> Yongseok
> 
> > +#endif
> > +
> >  /* LIB_GLUE_VERSION must be updated every time this structure is
> > modified. */  struct mlx5_glue {
> >  	const char *version;
> > @@ -85,6 +91,7 @@ struct mlx5_glue {
> >  	struct ibv_flow *(*create_flow)(struct ibv_qp *qp,
> >  					struct ibv_flow_attr *flow);
> >  	int (*destroy_flow)(struct ibv_flow *flow_id);
> > +	int (*destroy_flow_action)(struct ibv_flow_action *action);
> >  	struct ibv_qp *(*create_qp)(struct ibv_pd *pd,
> >  				    struct ibv_qp_init_attr *qp_init_attr);
> >  	struct ibv_qp *(*create_qp_ex)
> > @@ -137,6 +144,12 @@ struct mlx5_glue {
> >  			  struct mlx5dv_flow_match_parameters
> *match_value,
> >  			  size_t num_actions,
> >  			  struct mlx5dv_flow_action_attr *actions_attr);
> > +	struct ibv_flow_action *(*dv_create_flow_action_packet_reformat)
> > +		(struct ibv_context *ctx,
> > +		 size_t data_sz,
> > +		 void *data,
> > +		 enum mlx5dv_flow_action_packet_reformat_type
> reformat_type,
> > +		 enum mlx5dv_flow_table_type ft_type);
> >  };
> >
> >  const struct mlx5_glue *mlx5_glue;
> > --
> > 1.8.3.1
> >


More information about the dev mailing list