[dpdk-dev] [PATCH v3 3/3] net/mlx5: rewrite TTL by E-Switch

Yongseok Koh yskoh at mellanox.com
Thu Oct 11 07:47:25 CEST 2018


On Wed, Oct 10, 2018 at 06:06:00AM -0700, Jack Min wrote:
> Offload following modify TTL actions to E-Switch via
> TC-Flower driver
> 
> - RTE_FLOW_ACTION_TYPE_SET_TTL
> - RTE_FLOW_ACTION_TYPE_DEC_TTL
> 
> The corresponding IP protocol rte_flow_item_ipv[4|6]
> must be present in rte_flow pattern otherwith PMD
> return error
> 
> The example testpmd commands are:
> 
>     flow create 0 transfer ingress
>          pattern eth / ipv4 / udp dst is 7000 / end
> 	 actions dec_ttl /
> 	 port_id id 1 / end
> 
>     flow create 0 transfer ingress
>          pattern eth / ipv4 / udp dst is 7001 / end
> 	 actions set_ttl ttl_value 10 /
> 	 port_id id 1 / end
> 
> Signed-off-by: Xiaoyu Min <jackmin at mellanox.com>
> ---

Acked-by: Yongseok Koh <yskoh at mellanox.com>

But you should rebase it on your patch -
	net/mlx5: rewrite IP address UDP/TCP port by E-Switch

Thanks

>  drivers/net/mlx5/mlx5_flow.h     |  2 +
>  drivers/net/mlx5/mlx5_flow_tcf.c | 84 +++++++++++++++++++++++++++++++-
>  2 files changed, 84 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index cbb8c56c8..0ad8c12ea 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -84,6 +84,8 @@
>  #define MLX5_FLOW_ACTION_SET_IPV6_DST (1u << 14)
>  #define MLX5_FLOW_ACTION_SET_TP_SRC (1u << 15)
>  #define MLX5_FLOW_ACTION_SET_TP_DST (1u << 16)
> +#define MLX5_FLOW_ACTION_SET_TTL (1u << 17)
> +#define MLX5_FLOW_ACTION_DEC_TTL (1u << 18)
>  
>  #define MLX5_FLOW_FATE_ACTIONS \
>  	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)
> diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
> index 65e8a4b3f..af8a68529 100644
> --- a/drivers/net/mlx5/mlx5_flow_tcf.c
> +++ b/drivers/net/mlx5/mlx5_flow_tcf.c
> @@ -217,6 +217,10 @@ struct tc_pedit_sel {
>  #define TP_PORT_LEN 2 /* Transport Port (UDP/TCP) Length */
>  #endif
>  
> +#ifndef TTL_LEN
> +#define TTL_LEN 1
> +#endif
> +
>  /** Empty masks for known item types. */
>  static const union {
>  	struct rte_flow_item_port_id port_id;
> @@ -299,13 +303,16 @@ struct flow_tcf_ptoi {
>  				MLX5_FLOW_ACTION_SET_IPV6_SRC | \
>  				MLX5_FLOW_ACTION_SET_IPV6_DST | \
>  				MLX5_FLOW_ACTION_SET_TP_SRC   | \
> -				MLX5_FLOW_ACTION_SET_TP_DST)
> +				MLX5_FLOW_ACTION_SET_TP_DST   | \
> +				MLX5_FLOW_ACTION_SET_TTL      | \
> +				MLX5_FLOW_ACTION_DEC_TTL)
>  
>  #define MLX5_TCF_CONFIG_ACTIONS (MLX5_FLOW_ACTION_PORT_ID | \
>  				 MLX5_FLOW_ACTION_OF_PUSH_VLAN | \
>  				 MLX5_FLOW_ACTION_OF_SET_VLAN_VID | \
>  				 MLX5_FLOW_ACTION_OF_SET_VLAN_PCP | \
> -				 MLX5_TCF_PEDIT_ACTIONS)
> +				 (MLX5_TCF_PEDIT_ACTIONS & \
> +				  ~MLX5_FLOW_ACTION_DEC_TTL))
>  
>  #define MAX_PEDIT_KEYS (128)
>  #define SZ_PEDIT_KEY_VAL (4)
> @@ -338,6 +345,46 @@ flow_tcf_calc_pedit_keys(const uint64_t size)
>  	return keys;
>  }
>  
> +/**
> + * Set pedit key of decrease/set ttl
> + *
> + * @param[in] actions
> + *   pointer to action specification
> + * @param[in,out] p_parser
> + *   pointer to pedit_parser
> + * @param[in] item_flags
> + *   flags of all items presented
> + */
> +static void
> +flow_tcf_pedit_key_set_dec_ttl(const struct rte_flow_action *actions,
> +				struct pedit_parser *p_parser,
> +				uint64_t item_flags)
> +{
> +	int idx = p_parser->sel.nkeys;
> +
> +	p_parser->keys[idx].mask = 0xFFFFFF00;
> +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV4) {
> +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP4;
> +		p_parser->keys[idx].off =
> +			offsetof(struct ipv4_hdr, time_to_live);
> +	}
> +	if (item_flags & MLX5_FLOW_LAYER_OUTER_L3_IPV6) {
> +		p_parser->keys_ex[idx].htype = TCA_PEDIT_KEY_EX_HDR_TYPE_IP6;
> +		p_parser->keys[idx].off =
> +			offsetof(struct ipv6_hdr, hop_limits);
> +	}
> +	if (actions->type == RTE_FLOW_ACTION_TYPE_DEC_TTL) {
> +		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_ADD;
> +		p_parser->keys[idx].val = 0x000000FF;
> +	} else {
> +		p_parser->keys_ex[idx].cmd = TCA_PEDIT_KEY_EX_CMD_SET;
> +		p_parser->keys[idx].val =
> +			(__u32)((const struct rte_flow_action_set_ttl *)
> +			 actions->conf)->ttl_value;
> +	}
> +	p_parser->sel.nkeys = (++idx);
> +}
> +
>  /**
>   * Set pedit key of transport (TCP/UDP) port value
>   *
> @@ -477,6 +524,11 @@ flow_tcf_create_pedit_mnl_msg(struct nlmsghdr *nl,
>  			flow_tcf_pedit_key_set_tp_port(*actions,
>  							&p_parser, item_flags);
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> +			flow_tcf_pedit_key_set_dec_ttl(*actions,
> +							&p_parser, item_flags);
> +			break;
>  		default:
>  			goto pedit_mnl_msg_done;
>  		}
> @@ -557,6 +609,14 @@ flow_tcf_get_pedit_actions_size(const struct rte_flow_action **actions,
>  			keys += flow_tcf_calc_pedit_keys(TP_PORT_LEN);
>  			flags |= MLX5_FLOW_ACTION_SET_TP_DST;
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
> +			flags |= MLX5_FLOW_ACTION_SET_TTL;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> +			keys += flow_tcf_calc_pedit_keys(TTL_LEN);
> +			flags |= MLX5_FLOW_ACTION_DEC_TTL;
> +			break;
>  		default:
>  			goto get_pedit_action_size_done;
>  		}
> @@ -1075,6 +1135,12 @@ flow_tcf_validate(struct rte_eth_dev *dev,
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
>  			current_action_flag = MLX5_FLOW_ACTION_SET_TP_DST;
>  			break;
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +			current_action_flag = MLX5_FLOW_ACTION_SET_TTL;
> +			break;
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
> +			current_action_flag = MLX5_FLOW_ACTION_DEC_TTL;
> +			break;
>  		default:
>  			return rte_flow_error_set(error, ENOTSUP,
>  						  RTE_FLOW_ERROR_TYPE_ACTION,
> @@ -1169,6 +1235,16 @@ flow_tcf_validate(struct rte_eth_dev *dev,
>  		return rte_flow_error_set(error, EINVAL,
>  					  RTE_FLOW_ERROR_TYPE_ACTION, actions,
>  					  "no fate action is found");
> +	if (action_flags &
> +	   (MLX5_FLOW_ACTION_SET_TTL | MLX5_FLOW_ACTION_DEC_TTL)) {
> +		if (!(item_flags &
> +		     (MLX5_FLOW_LAYER_OUTER_L3_IPV4 |
> +		      MLX5_FLOW_LAYER_OUTER_L3_IPV6)))
> +			return rte_flow_error_set(error, EINVAL,
> +						  RTE_FLOW_ERROR_TYPE_ACTION,
> +						  actions,
> +						  "no IP found in pattern");
> +	}
>  	return 0;
>  }
>  
> @@ -1318,6 +1394,8 @@ flow_tcf_get_actions_and_size(const struct rte_flow_action actions[],
>  		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
>  			size += flow_tcf_get_pedit_actions_size(&actions,
>  								&flags);
>  			break;
> @@ -1862,6 +1940,8 @@ flow_tcf_translate(struct rte_eth_dev *dev, struct mlx5_flow *dev_flow,
>  		case RTE_FLOW_ACTION_TYPE_SET_IPV6_DST:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_SRC:
>  		case RTE_FLOW_ACTION_TYPE_SET_TP_DST:
> +		case RTE_FLOW_ACTION_TYPE_SET_TTL:
> +		case RTE_FLOW_ACTION_TYPE_DEC_TTL:
>  			na_act_index =
>  				mnl_attr_nest_start(nlh, na_act_index_cur++);
>  			flow_tcf_create_pedit_mnl_msg(nlh,
> -- 
> 2.17.1
> 


More information about the dev mailing list