[dpdk-dev] [PATCH v6 00/22] net/atlantic: Aquantia aQtion 10G NIC Family DPDK PMD driver
Ferruh Yigit
ferruh.yigit at intel.com
Fri Oct 12 18:22:11 CEST 2018
On 10/12/2018 12:09 PM, Igor Russkikh wrote:
> Hello DPDK community!
>
> Aquantia would like to contribute PMD for aQtion AQC10X NIC family:
> https://www.aquantia.com/products/aqtion/chips/
> These are 10G ethernet NICs with various features.
>
> We do base this work on parts of the existing native linux kernel
> driver source (atlantic). Shared code is hw_atl hardware and registers access module.
>
> We'd like to target this driver for 18.11 DPDK release timeline,
> it'd be good to hear comments from the community on how feasible is this.
>
> This patchset implements basic driver infrastructure,
> vlan offloads, checksumm offloads, rss control,
> multiring, jumbo frames and other features.
>
> Later on, we plan to share HW MACSEC offloads, rxflows and other features.
>
> version 6 changes:
> - PKT_TX_VLAN_PKT replaced with PKT_TX_VLAN
> - `rx_descriptor_done` removed
> - adding PKT_RX_VLAN/STRIPPED into mbuf->ol_flags when vlan offloads are on
> - commit headlines better naming
>
> version 5 changes:
> - MTU configuration is now in separate patch
> - Custom LED api removed. Will resubmit separately later on
> - Add product link to docs, rearranged adapter features file
> - MAINTAINERS file update
> - logging name prefix fixed
> - rte_eth_copy_pci_info is not needed in init
> - dev->security_ctx is not used (removed free)
> - fixed adapter_stopped and dev stop/close states interactions
> - return error if get_fw_version fails
> - added port# to important error logs
> - rte_eth_linkstatus_get instead of atomic64 ops
> - swstats are now cleared in stats_reset
> - xstats_reset callback declared as atl_dev_stats_reset
> - stats_mapping_set removed
> - check-git-logs fixes
>
> version 4 changes:
> - fixed build errors with -Werror on gcc7
> - validated build on arm64, freebsd x86_64
> - PPC marked as unsupported arch
> - stdbool.h is used instead of bool redefines
>
> version 3 changes:
> - patchset fixed to be incrementally buildable
> - extra includes removed and cleaned up
> - license changed to dual GPL-BSD for pieces shared with linux
> - removed extra logging #defines
> - misc comments from previous review session
>
> version 2 changes:
> - fixed build on freebsd (no ETIME const)
> - fixed a bunch of checkpatch failures and warnings
> - removed extra CFLAGS disabled warning
> - making static arrays const
>
>
> Igor Russkikh (8):
> net/atlantic: add logging structure
> net/atlantic: add hardware registers access routines
> net/atlantic: add hardware access layer
> net/atlantic: implement firmware operations
> net/atlantic: add b0 hardware layer
> net/atlantic: implement Rx path
> net/atlantic: implement RSS and RETA manipulation API
> net/atlantic: add release notes
>
> Pavel Belous (14):
> net/atlantic: add atlantic PMD driver skeleton
> net/atlantic: configure rte device start/stop
> net/atlantic: implement core logic for Tx/Rx
> net/atlantic: implement Tx path
> net/atlantic: add link status and interrupt management
> net/atlantic: implement device statistics
> net/atlantic: add Rx/Tx descriptors information
> net/atlantic: implement promisc and allmulti modes
> net/atlantic: add flow control configuration
> net/atlantic: implement MAC address manipulations
> net/atlantic: implement MTU configuration
> net/atlantic: implement VLAN filters and offloads
> net/atlantic: implement EEPROM get/set
> net/atlantic: read MAC registers for debug purposes
Series applied to dpdk-next-net/master, thanks.
Please don't forget to send a web page patch [1] to add new device support to
web site [2].
Thanks,
ferruh
[1]: http://dpdk.org/git/tools/dpdk-web
[2]: https://core.dpdk.org/supported/
More information about the dev
mailing list