[dpdk-dev] [PATCH v4 1/3] ethdev: add raw encapsulation action

Ori Kam orika at mellanox.com
Tue Oct 16 23:41:00 CEST 2018


Currenlty the encap/decap actions only support encapsulation
of VXLAN and NVGRE L2 packets (L2 encapsulation is where
the inner packet has a valid Ethernet header, while L3 encapsulation
is where the inner packet doesn't have the Ethernet header).
In addtion the parameter to to the encap action is a list of rte items,
this results in 2 extra translation, between the application to the
actioni and from the action to the NIC. This results in negetive impact
on the insertion performance.

Looking forward there are going to be a need to support many more tunnel
encapsulations. For example MPLSoGRE, MPLSoUDP.
Adding the new encapsulation will result in duplication of code.
For example the code for handling NVGRE and VXLAN are exactly the same,
and each new tunnel will have the same exact structure.

This patch introduce a raw encapsulation that can support L2 tunnel types
and L3 tunnel types. In addtion the new
encapsulations commands are using raw buffer inorder to save the
converstion time, both for the application and the PMD.

In order to encapsulate L3 tunnel type there is a need to use both
actions in the same rule: The decap to remove the L2 of the original
packet, and then encap command to encapsulate the packet with the
tunnel.
For decap L3 there is also a need to use both commands in the same flow
first the decap command to remove the outer tunnel header and then encap
to add the L2 header.

Signed-off-by: Ori Kam <orika at mellanox.com>
---
 doc/guides/prog_guide/rte_flow.rst | 51 ++++++++++++++++++++++++++++++++
 lib/librte_ethdev/rte_flow.c       |  2 ++
 lib/librte_ethdev/rte_flow.h       | 59 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 112 insertions(+)

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index a5ec441..647e938 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -2076,6 +2076,57 @@ RTE_FLOW_ERROR_TYPE_ACTION error should be returned.
 
 This action modifies the payload of matched flows.
 
+Action: ``RAW_ENCAP``
+^^^^^^^^^^^^^^^^^^^^^
+
+Adds outer header whose template is provided in it's data buffer,
+as defined in the ``rte_flow_action_raw_encap`` definition.
+
+This action modifies the payload of matched flows. The data supplied must
+be a valid header, either holding layer 2 data in case of adding layer 2 after
+decap layer 3 tunnel (for example MPLSoGRE) or complete tunnel definition
+starting from layer 2 and moving to the tunel item itself. When applied to
+the original packet the resulting packet must be a valid packet.
+
+.. _table_rte_flow_action_raw_encap:
+
+.. table:: RAW_ENCAP
+
+   +----------------+----------------------------------------+
+   | Field          | Value                                  |
+   +================+========================================+
+   | ``data``       | Encapsulation data                     |
+   +----------------+----------------------------------------+
+   | ``preserve``   | Bit-mask of data to preserve on output |
+   +----------------+----------------------------------------+
+   | ``size``       | Size of data and preserve              |
+   +----------------+----------------------------------------+
+
+Action: ``RAW_DECAP``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Remove outer header whose template is provided in it's data buffer,
+as defined in hte ``rte_flow_action_raw_decap``
+
+This action modifies the payload of matched flows. The data supplied must
+be a valid header, either holding layer 2 data in case of removing layer 2
+before incapsulation of layer 3 tunnel (for example MPLSoGRE) or complete
+tunnel definition starting from layer 2 and moving to the tunel item itself.
+When applied to the original packet the resulting packet must be a
+valid packet.
+
+.. _table_rte_flow_action_raw_decap:
+
+.. table:: RAW_DECAP
+
+   +----------------+----------------------------------------+
+   | Field          | Value                                  |
+   +================+========================================+
+   | ``data``       | Decapsulation data                     |
+   +----------------+----------------------------------------+
+   | ``size``       | Size of data                           |
+   +----------------+----------------------------------------+
+
 Action: ``SET_IPV4_SRC``
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index bc9e719..1e5cd73 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -123,6 +123,8 @@ struct rte_flow_desc_data {
 	MK_FLOW_ACTION(VXLAN_DECAP, 0),
 	MK_FLOW_ACTION(NVGRE_ENCAP, sizeof(struct rte_flow_action_vxlan_encap)),
 	MK_FLOW_ACTION(NVGRE_DECAP, 0),
+	MK_FLOW_ACTION(RAW_ENCAP, sizeof(struct rte_flow_action_raw_encap)),
+	MK_FLOW_ACTION(RAW_DECAP, sizeof(struct rte_flow_action_raw_decap)),
 	MK_FLOW_ACTION(SET_IPV4_SRC,
 		       sizeof(struct rte_flow_action_set_ipv4)),
 	MK_FLOW_ACTION(SET_IPV4_DST,
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index 68bbf57..3ae9de3 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -1508,6 +1508,20 @@ enum rte_flow_action_type {
 	RTE_FLOW_ACTION_TYPE_NVGRE_DECAP,
 
 	/**
+	 * Adds outer header whose template is provided in it's data buffer
+	 *
+	 * See struct rte_flow_action_raw_encap.
+	 */
+	RTE_FLOW_ACTION_TYPE_RAW_ENCAP,
+
+	/**
+	 * Remove outer header whose tempalte is provided in it's data buffer.
+	 *
+	 * See struct rte_flow_action_raw_decap
+	 */
+	RTE_FLOW_ACTION_TYPE_RAW_DECAP,
+
+	/**
 	 * Modify IPv4 source address in the outermost IPv4 header.
 	 *
 	 * If flow pattern does not define a valid RTE_FLOW_ITEM_TYPE_IPV4,
@@ -1946,6 +1960,51 @@ struct rte_flow_action_nvgre_encap {
  * @warning
  * @b EXPERIMENTAL: this structure may change without prior notice
  *
+ * RTE_FLOW_ACTION_TYPE_RAW_ENCAP
+ *
+ * Raw tunnel end-point encapsulation data definition.
+ *
+ * The data holds the headers definitions to be applied on the packet.
+ * The data must start with ETH header up to the tunnel item header itself.
+ * When used right after RAW_DECAP (for decapsulating L3 tunnel type for
+ * example MPLSoGRE) the data will just hold layer 2 header.
+ *
+ * The preserve parameter holds which bits in the packet the PMD is not allowd
+ * to change, this parameter can also be NULL and then the PMD is allowed
+ * to update any field.
+ *
+ * size holds the number of bytes in @p data and @p preserve.
+ */
+struct rte_flow_action_raw_encap {
+	uint8_t *data; /**< Encapsulation data. */
+	uint8_t *preserve; /**< Bit-mask of @p data to preserve on output. */
+	size_t size; /**< Size of @p data and @p preserve. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ACTION_TYPE_RAW_DECAP
+ *
+ * Raw tunnel end-point decapsulation data definition.
+ *
+ * The data holds the headers definitions to be removed from the packet.
+ * The data must start with ETH header up to the tunnel item header itself.
+ * When used right before RAW_DECAP (for encapsulating L3 tunnel type for
+ * example MPLSoGRE) the data will just hold layer 2 header.
+ *
+ * size holds the number of bytes in @p data.
+ */
+struct rte_flow_action_raw_decap {
+	uint8_t *data; /**< Encapsulation data. */
+	size_t size; /**< Size of @p data and @p preserve. */
+};
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
  * RTE_FLOW_ACTION_TYPE_SET_IPV4_SRC
  * RTE_FLOW_ACTION_TYPE_SET_IPV4_DST
  *
-- 
1.8.3.1



More information about the dev mailing list