[dpdk-dev] [PATCH v6 3/3] app/testpmd: set packet dump based on verbosity level
Raslan Darawsheh
rasland at mellanox.com
Wed Oct 17 17:22:11 CEST 2018
when changing verbosity level it will configure rx/tx callbacks to dump
packets based on the verbosity value as following:
1- dump only received packets:
testpmd> set verbose 1
2- dump only sent packets:
testpmd> set verbose 2
3- dump sent and received packets:
testpmd> set verbose (any number > 2)
4- disable dump
testpmd> set verbose 0
Signed-off-by: Raslan Darawsheh <rasland at mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger at intel.com>
---
changes in v6:
add documentation for the packet dump
---
---
app/test-pmd/config.c | 25 +++++++++++++++++++++++++
app/test-pmd/testpmd.c | 4 ++--
app/test-pmd/testpmd.h | 1 +
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++++-
4 files changed, 33 insertions(+), 3 deletions(-)
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 55fec7f..1696623 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -50,6 +50,7 @@
#endif
#include <rte_gro.h>
#include <cmdline_parse_etheraddr.h>
+#include <rte_config.h>
#include "testpmd.h"
@@ -2773,11 +2774,35 @@ remove_tx_dump_callbacks(portid_t portid)
}
void
+configure_rxtx_dump_callbacks(uint16_t verbose)
+{
+ portid_t portid;
+
+#ifndef RTE_ETHDEV_RXTX_CALLBACKS
+ TESTPMD_LOG(ERR, "setting rxtx callbacks is not enabled\n");
+ return;
+#endif
+
+ RTE_ETH_FOREACH_DEV(portid)
+ {
+ if (verbose == 1 || verbose > 2)
+ add_rx_dump_callbacks(portid);
+ else
+ remove_rx_dump_callbacks(portid);
+ if (verbose >= 2)
+ add_tx_dump_callbacks(portid);
+ else
+ remove_tx_dump_callbacks(portid);
+ }
+}
+
+void
set_verbose_level(uint16_t vb_level)
{
printf("Change verbose level from %u to %u\n",
(unsigned int) verbose_level, (unsigned int) vb_level);
verbose_level = vb_level;
+ configure_rxtx_dump_callbacks(verbose_level);
}
void
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5dbbf78..3c42924 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1988,7 +1988,7 @@ start_port(portid_t pid)
return -1;
}
}
-
+ configure_rxtx_dump_callbacks(0);
printf("Configuring Port %d (socket %u)\n", pi,
port->socket_id);
/* configure port */
@@ -2087,7 +2087,7 @@ start_port(portid_t pid)
return -1;
}
}
-
+ configure_rxtx_dump_callbacks(verbose_level);
/* start port */
if (rte_eth_dev_start(pi) < 0) {
printf("Fail to start port %d\n", pi);
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index c07bee8..3da728c 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -777,6 +777,7 @@ void add_rx_dump_callbacks(portid_t portid);
void remove_rx_dump_callbacks(portid_t portid);
void add_tx_dump_callbacks(portid_t portid);
void remove_tx_dump_callbacks(portid_t portid);
+void configure_rxtx_dump_callbacks(uint16_t verbose);
/*
* Work-around of a compilation error with ICC on invocations of the
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index ca060e1..60855c6 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -449,7 +449,11 @@ Set the debug verbosity level::
testpmd> set verbose (level)
-Currently the only available levels are 0 (silent except for error) and 1 (fully verbose).
+Available levels are as following:
+* ``0`` silent except for error.
+* ``1`` fully verbose except for Tx packets.
+* ``2`` fully verbose except for Rx packets.
+* ``> 2`` fully verbose.
set log
~~~~~~~
--
2.7.4
More information about the dev
mailing list