[dpdk-dev] [PATCH v4 03/15] crypto/caam_jr: add routines to configure HW

Gagandeep Singh G.Singh at nxp.com
Mon Oct 22 16:17:39 CEST 2018


This patch add routines for configuring the hw
to support various features.
These routines will be used by the PMD ops.
The patch also defines structure and macros used
to access hw capabilities.

Signed-off-by: Gagandeep Singh <g.singh at nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal at nxp.com>
Acked-by: Akhil Goyal <akhil.goyal at nxp.com>
---
 drivers/crypto/caam_jr/Makefile              |   5 +
 drivers/crypto/caam_jr/caam_jr_hw.c          | 379 ++++++++++++++
 drivers/crypto/caam_jr/caam_jr_hw_specific.h | 503 +++++++++++++++++++
 drivers/crypto/caam_jr/caam_jr_pvt.h         | 286 +++++++++++
 drivers/crypto/caam_jr/meson.build           |   5 +-
 5 files changed, 1177 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/caam_jr/caam_jr_hw.c
 create mode 100644 drivers/crypto/caam_jr/caam_jr_hw_specific.h
 create mode 100644 drivers/crypto/caam_jr/caam_jr_pvt.h

diff --git a/drivers/crypto/caam_jr/Makefile b/drivers/crypto/caam_jr/Makefile
index b1f3ecee7..e22943749 100644
--- a/drivers/crypto/caam_jr/Makefile
+++ b/drivers/crypto/caam_jr/Makefile
@@ -16,7 +16,10 @@ CFLAGS += -D _GNU_SOURCE
 CFLAGS += -O3
 CFLAGS += $(WERROR_FLAGS)
 
+CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include
 CFLAGS += -I$(RTE_SDK)/drivers/crypto/caam_jr
+#sharing the hw flib headers from dpaa2_sec pmd
+CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec/
 CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
 CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
 
@@ -28,10 +31,12 @@ LIBABIVER := 1
 
 # library source files
 SRCS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr_hw.c
 # library dependencies
 
 LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
 LDLIBS += -lrte_cryptodev
+LDLIBS += -lrte_bus_dpaa
 LDLIBS += -lrte_bus_vdev
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/caam_jr/caam_jr_hw.c b/drivers/crypto/caam_jr/caam_jr_hw.c
new file mode 100644
index 000000000..73cc61a27
--- /dev/null
+++ b/drivers/crypto/caam_jr/caam_jr_hw.c
@@ -0,0 +1,379 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2017-2018 NXP
+ */
+
+#include <fcntl.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <rte_common.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_crypto.h>
+#include <rte_security.h>
+
+#include <caam_jr_config.h>
+#include <caam_jr_hw_specific.h>
+#include <caam_jr_pvt.h>
+#include <caam_jr_log.h>
+
+/* RTA header files */
+#include <hw/desc/common.h>
+#include <hw/desc/algo.h>
+#include <hw/desc/ipsec.h>
+
+/* Used to retry resetting a job ring in SEC hardware. */
+#define SEC_TIMEOUT 100000
+
+/* @brief Process Jump Halt Condition related errors
+ *
+ * @param [in]  error_code        The error code in the descriptor status word
+ */
+static inline void
+hw_handle_jmp_halt_cond_err(union hw_error_code error_code)
+{
+	CAAM_JR_DEBUG("JMP: %d, Descriptor Index: 0x%x, Condition: 0x%x",
+			error_code.error_desc.jmp_halt_cond_src.jmp,
+			error_code.error_desc.jmp_halt_cond_src.desc_idx,
+			error_code.error_desc.jmp_halt_cond_src.cond);
+	(void)error_code;
+}
+
+/* @brief Process DECO related errors
+ *
+ * @param [in]  error_code        The error code in the descriptor status word
+ */
+static inline void
+hw_handle_deco_err(union hw_error_code error_code)
+{
+	CAAM_JR_DEBUG("JMP: %d, Descriptor Index: 0x%x",
+			error_code.error_desc.deco_src.jmp,
+			error_code.error_desc.deco_src.desc_idx);
+
+	switch (error_code.error_desc.deco_src.desc_err) {
+	case SEC_HW_ERR_DECO_HFN_THRESHOLD:
+		CAAM_JR_DEBUG(" Warning: Descriptor completed normally,"
+			"but 3GPP HFN matches or exceeds the Threshold ");
+		break;
+	default:
+		CAAM_JR_DEBUG("Error 0x%04x not implemented",
+				error_code.error_desc.deco_src.desc_err);
+		break;
+	}
+}
+
+/* @brief Process  Jump Halt User Status related errors
+ *
+ * @param [in]  error_code        The error code in the descriptor status word
+ */
+static inline void
+hw_handle_jmp_halt_user_err(union hw_error_code error_code __rte_unused)
+{
+	CAAM_JR_DEBUG(" Not implemented");
+}
+
+/* @brief Process CCB related errors
+ *
+ * @param [in]  error_code        The error code in the descriptor status word
+ */
+static inline void
+hw_handle_ccb_err(union hw_error_code hw_error_code __rte_unused)
+{
+	CAAM_JR_DEBUG(" Not implemented");
+}
+
+/* @brief Process Job Ring related errors
+ *
+ * @param [in]  error_code        The error code in the descriptor status word
+ */
+static inline void
+hw_handle_jr_err(union hw_error_code hw_error_code __rte_unused)
+{
+	CAAM_JR_DEBUG(" Not implemented");
+}
+
+uint32_t
+caam_jr_enable_irqs(uint32_t uio_fd __rte_unused)
+{
+	return 0;
+}
+
+uint32_t
+caam_jr_disable_irqs(uint32_t uio_fd __rte_unused)
+{
+	return 0;
+}
+
+int
+hw_reset_job_ring(struct sec_job_ring_t *job_ring)
+{
+	int ret = 0;
+
+	ASSERT(job_ring->register_base_addr != NULL);
+
+	/* First reset the job ring in hw */
+	ret = hw_shutdown_job_ring(job_ring);
+	SEC_ASSERT(ret == 0, ret, "Failed resetting job ring in hardware");
+
+	/* In order to have the HW JR in a workable state
+	 * after a reset, I need to re-write the input
+	 * queue size, input start address, output queue
+	 * size and output start address
+	 */
+	/* Write the JR input queue size to the HW register */
+	hw_set_input_ring_size(job_ring, SEC_JOB_RING_SIZE);
+
+	/* Write the JR output queue size to the HW register */
+	hw_set_output_ring_size(job_ring, SEC_JOB_RING_SIZE);
+
+	/* Write the JR input queue start address */
+	hw_set_input_ring_start_addr(job_ring,
+			caam_jr_dma_vtop(job_ring->input_ring));
+	CAAM_JR_DEBUG(" Set input ring base address to : Virtual: 0x%" PRIx64
+		      ",Physical: 0x%" PRIx64 ", Read from HW: 0x%" PRIx64,
+		      (uint64_t)(uintptr_t)job_ring->input_ring,
+		      caam_jr_dma_vtop(job_ring->input_ring),
+		      hw_get_inp_queue_base(job_ring));
+
+	/* Write the JR output queue start address */
+	hw_set_output_ring_start_addr(job_ring,
+			caam_jr_dma_vtop(job_ring->output_ring));
+	CAAM_JR_DEBUG(" Set output ring base address to: Virtual: 0x%" PRIx64
+		      ",Physical: 0x%" PRIx64 ", Read from HW: 0x%" PRIx64,
+		      (uint64_t)(uintptr_t)job_ring->output_ring,
+		      caam_jr_dma_vtop(job_ring->output_ring),
+		      hw_get_out_queue_base(job_ring));
+	return ret;
+}
+
+int
+hw_shutdown_job_ring(struct sec_job_ring_t *job_ring)
+{
+	unsigned int timeout = SEC_TIMEOUT;
+	uint32_t tmp = 0;
+	int usleep_interval = 10;
+
+	if (job_ring->register_base_addr == NULL) {
+		CAAM_JR_ERR("Jr[%p] has reg base addr as NULL.driver not init",
+			job_ring);
+		return 0;
+	}
+
+	CAAM_JR_INFO("Resetting Job ring %p", job_ring);
+
+	/*
+	 * Mask interrupts since we are going to poll
+	 * for reset completion status
+	 * Also, at POR, interrupts are ENABLED on a JR, thus
+	 * this is the point where I can disable them without
+	 * changing the code logic too much
+	 */
+	caam_jr_disable_irqs(job_ring->irq_fd);
+
+	/* initiate flush (required prior to reset) */
+	SET_JR_REG(JRCR, job_ring, JR_REG_JRCR_VAL_RESET);
+
+	/* dummy read */
+	tmp = GET_JR_REG(JRCR, job_ring);
+
+	do {
+		tmp = GET_JR_REG(JRINT, job_ring);
+		usleep(usleep_interval);
+	} while (((tmp & JRINT_ERR_HALT_MASK) ==
+			JRINT_ERR_HALT_INPROGRESS) && --timeout);
+
+	CAAM_JR_INFO("JRINT is %x", tmp);
+	if ((tmp & JRINT_ERR_HALT_MASK) != JRINT_ERR_HALT_COMPLETE ||
+		timeout == 0) {
+		CAAM_JR_ERR("0x%x, %d", tmp, timeout);
+		/* unmask interrupts */
+		if (job_ring->jr_mode != SEC_NOTIFICATION_TYPE_POLL)
+			caam_jr_enable_irqs(job_ring->irq_fd);
+		return -1;
+	}
+
+	/* Initiate reset */
+	timeout = SEC_TIMEOUT;
+	SET_JR_REG(JRCR, job_ring, JR_REG_JRCR_VAL_RESET);
+
+	do {
+		tmp = GET_JR_REG(JRCR, job_ring);
+		usleep(usleep_interval);
+	} while ((tmp & JR_REG_JRCR_VAL_RESET) && --timeout);
+
+	CAAM_JR_DEBUG("JRCR is %x", tmp);
+	if (timeout == 0) {
+		CAAM_JR_ERR("Failed to reset hw job ring %p", job_ring);
+		/* unmask interrupts */
+		if (job_ring->jr_mode != SEC_NOTIFICATION_TYPE_POLL)
+			caam_jr_enable_irqs(job_ring->irq_fd);
+		return -1;
+	}
+	/* unmask interrupts */
+	if (job_ring->jr_mode != SEC_NOTIFICATION_TYPE_POLL)
+		caam_jr_enable_irqs(job_ring->irq_fd);
+	return 0;
+
+}
+
+void
+hw_handle_job_ring_error(struct sec_job_ring_t *job_ring __rte_unused,
+			 uint32_t error_code)
+{
+	union hw_error_code hw_err_code;
+
+	hw_err_code.error = error_code;
+	switch (hw_err_code.error_desc.value.ssrc) {
+	case SEC_HW_ERR_SSRC_NO_SRC:
+		ASSERT(hw_err_code.error_desc.no_status_src.res == 0);
+		CAAM_JR_ERR("No Status Source ");
+		break;
+	case SEC_HW_ERR_SSRC_CCB_ERR:
+		CAAM_JR_ERR("CCB Status Source");
+		hw_handle_ccb_err(hw_err_code);
+		break;
+	case SEC_HW_ERR_SSRC_JMP_HALT_U:
+		CAAM_JR_ERR("Jump Halt User Status Source");
+		hw_handle_jmp_halt_user_err(hw_err_code);
+		break;
+	case SEC_HW_ERR_SSRC_DECO:
+		CAAM_JR_ERR("DECO Status Source");
+		hw_handle_deco_err(hw_err_code);
+		break;
+	case SEC_HW_ERR_SSRC_JR:
+		CAAM_JR_ERR("Job Ring Status Source");
+		hw_handle_jr_err(hw_err_code);
+		break;
+	case SEC_HW_ERR_SSRC_JMP_HALT_COND:
+		CAAM_JR_ERR("Jump Halt Condition Codes");
+		hw_handle_jmp_halt_cond_err(hw_err_code);
+		break;
+	default:
+		ASSERT(0);
+		CAAM_JR_ERR("Unknown SSRC");
+		break;
+	}
+}
+
+void
+hw_job_ring_error_print(struct sec_job_ring_t *job_ring, int code)
+{
+	switch (code) {
+	case JRINT_ERR_WRITE_STATUS:
+		CAAM_JR_ERR("Error writing status to Output Ring ");
+		break;
+	case JRINT_ERR_BAD_INPUT_BASE:
+		CAAM_JR_ERR(
+		"Bad Input Ring Base (%p) (not on a 4-byte boundary) ",
+		(void *)job_ring);
+		break;
+	case JRINT_ERR_BAD_OUTPUT_BASE:
+		CAAM_JR_ERR(
+		"Bad Output Ring Base (%p) (not on a 4-byte boundary) ",
+		(void *)job_ring);
+		break;
+	case JRINT_ERR_WRITE_2_IRBA:
+		CAAM_JR_ERR(
+		"Invalid write to Input Ring Base Address Register ");
+		break;
+	case JRINT_ERR_WRITE_2_ORBA:
+		CAAM_JR_ERR(
+		"Invalid write to Output Ring Base Address Register ");
+		break;
+	case JRINT_ERR_RES_B4_HALT:
+		CAAM_JR_ERR(
+		"Job Ring [%p] released before Job Ring is halted",
+		(void *)job_ring);
+		break;
+	case JRINT_ERR_REM_TOO_MANY:
+		CAAM_JR_ERR("Removed too many jobs from job ring [%p]",
+			(void *)job_ring);
+		break;
+	case JRINT_ERR_ADD_TOO_MANY:
+		CAAM_JR_ERR("Added too many jobs on job ring [%p]", job_ring);
+		break;
+	default:
+		CAAM_JR_ERR(" Unknown SEC JR Error :%d",
+				code);
+		break;
+	}
+}
+
+int
+hw_job_ring_set_coalescing_param(struct sec_job_ring_t *job_ring,
+				 uint16_t irq_coalescing_timer,
+				 uint8_t irq_coalescing_count)
+{
+	uint32_t reg_val = 0;
+
+	ASSERT(job_ring != NULL);
+	if (job_ring->register_base_addr == NULL) {
+		CAAM_JR_ERR("Jr[%p] has reg base addr as NULL.driver not init",
+			job_ring);
+		return -1;
+	}
+	/* Set descriptor count coalescing */
+	reg_val |= (irq_coalescing_count << JR_REG_JRCFG_LO_ICDCT_SHIFT);
+
+	/* Set coalescing timer value */
+	reg_val |= (irq_coalescing_timer << JR_REG_JRCFG_LO_ICTT_SHIFT);
+
+	/* Update parameters in HW */
+	SET_JR_REG_LO(JRCFG, job_ring, reg_val);
+	CAAM_JR_DEBUG("Set coalescing params on jr %p timer:%d, desc count: %d",
+			job_ring, irq_coalescing_timer, irq_coalescing_timer);
+
+	return 0;
+}
+
+int
+hw_job_ring_enable_coalescing(struct sec_job_ring_t *job_ring)
+{
+	uint32_t reg_val = 0;
+
+	ASSERT(job_ring != NULL);
+	if (job_ring->register_base_addr == NULL) {
+		CAAM_JR_ERR("Jr[%p] has reg base addr as NULL.driver not init",
+			job_ring);
+		return -1;
+	}
+
+	/* Get the current value of the register */
+	reg_val = GET_JR_REG_LO(JRCFG, job_ring);
+
+	/* Enable coalescing */
+	reg_val |= JR_REG_JRCFG_LO_ICEN_EN;
+
+	/* Write in hw */
+	SET_JR_REG_LO(JRCFG, job_ring, reg_val);
+
+	CAAM_JR_DEBUG("Enabled coalescing on jr %p ",
+			job_ring);
+
+	return 0;
+}
+
+int
+hw_job_ring_disable_coalescing(struct sec_job_ring_t *job_ring)
+{
+	uint32_t reg_val = 0;
+
+	ASSERT(job_ring != NULL);
+
+	if (job_ring->register_base_addr == NULL) {
+		CAAM_JR_ERR("Jr[%p] has reg base addr as NULL.driver not init",
+			job_ring);
+		return -1;
+	}
+
+	/* Get the current value of the register */
+	reg_val = GET_JR_REG_LO(JRCFG, job_ring);
+
+	/* Disable coalescing */
+	reg_val &= ~JR_REG_JRCFG_LO_ICEN_EN;
+
+	/* Write in hw */
+	SET_JR_REG_LO(JRCFG, job_ring, reg_val);
+	CAAM_JR_DEBUG("Disabled coalescing on jr %p ", job_ring);
+
+	return 0;
+}
diff --git a/drivers/crypto/caam_jr/caam_jr_hw_specific.h b/drivers/crypto/caam_jr/caam_jr_hw_specific.h
new file mode 100644
index 000000000..5f58a585d
--- /dev/null
+++ b/drivers/crypto/caam_jr/caam_jr_hw_specific.h
@@ -0,0 +1,503 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2017 NXP
+ */
+
+#ifndef CAAM_JR_HW_SPECIFIC_H
+#define CAAM_JR_HW_SPECIFIC_H
+
+#include <caam_jr_config.h>
+
+/*
+ * Offset to the registers of a job ring.
+ * Is different for each job ring.
+ */
+#define CHAN_BASE(jr)   ((size_t)(jr)->register_base_addr)
+
+#define SEC_JOB_RING_IS_FULL(pi, ci, ring_max_size, ring_threshold) \
+		((((pi) + 1 + ((ring_max_size) - (ring_threshold))) & \
+		  (ring_max_size - 1))  == ((ci)))
+
+#define SEC_CIRCULAR_COUNTER(x, max)   (((x) + 1) & (max - 1))
+
+/*
+ * Assert that cond is true. If !cond is true, display str and the vararg list
+ * in a printf-like syntax. also, if !cond is true, return altRet.
+ *
+ * \param cond          A boolean expression to be asserted true
+ * \param altRet        The value to be returned if cond doesn't hold true
+ * \param str           A quoted char string
+ *
+ * E.g.:
+ *      SEC_ASSERT(ret > 0, 0, "ERROR initializing app: code = %d\n", ret);
+ */
+#define SEC_ASSERT(cond, altRet, ...) do {\
+	if (unlikely(!(cond))) {\
+		CAAM_JR_ERR(__VA_ARGS__); \
+		return altRet; \
+	} \
+} while (0)
+
+#define SEC_DP_ASSERT(cond, altRet, ...) do {\
+	if (unlikely(!(cond))) {\
+		CAAM_JR_DP_ERR(__VA_ARGS__); \
+		return altRet; \
+	} \
+} while (0)
+
+#define ASSERT(x)
+
+/*
+ * Constants representing various job ring registers
+ */
+#if CAAM_BYTE_ORDER == __BIG_ENDIAN
+#define JR_REG_IRBA_OFFSET		0x0000
+#define JR_REG_IRBA_OFFSET_LO		0x0004
+#else
+#define JR_REG_IRBA_OFFSET		0x0004
+#define JR_REG_IRBA_OFFSET_LO		0x0000
+#endif
+
+#define JR_REG_IRSR_OFFSET		0x000C
+#define JR_REG_IRSA_OFFSET		0x0014
+#define JR_REG_IRJA_OFFSET		0x001C
+
+#if CAAM_BYTE_ORDER == __BIG_ENDIAN
+#define JR_REG_ORBA_OFFSET		0x0020
+#define JR_REG_ORBA_OFFSET_LO		0x0024
+#else
+#define JR_REG_ORBA_OFFSET		0x0024
+#define JR_REG_ORBA_OFFSET_LO		0x0020
+#endif
+
+#define JR_REG_ORSR_OFFSET		0x002C
+#define JR_REG_ORJR_OFFSET		0x0034
+#define JR_REG_ORSFR_OFFSET		0x003C
+#define JR_REG_JROSR_OFFSET		0x0044
+#define JR_REG_JRINT_OFFSET		0x004C
+
+#define JR_REG_JRCFG_OFFSET		0x0050
+#define JR_REG_JRCFG_OFFSET_LO		0x0054
+
+#define JR_REG_IRRI_OFFSET		0x005C
+#define JR_REG_ORWI_OFFSET		0x0064
+#define JR_REG_JRCR_OFFSET		0x006C
+
+/*
+ * Constants for error handling on job ring
+ */
+#define JR_REG_JRINT_ERR_TYPE_SHIFT	8
+#define JR_REG_JRINT_ERR_ORWI_SHIFT	16
+#define JR_REG_JRINIT_JRE_SHIFT		1
+
+#define JRINT_JRE			(1 << JR_REG_JRINIT_JRE_SHIFT)
+#define JRINT_ERR_WRITE_STATUS		(1 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_BAD_INPUT_BASE	(3 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_BAD_OUTPUT_BASE	(4 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_WRITE_2_IRBA		(5 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_WRITE_2_ORBA		(6 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_RES_B4_HALT		(7 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_REM_TOO_MANY		(8 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_ADD_TOO_MANY		(9 << JR_REG_JRINT_ERR_TYPE_SHIFT)
+#define JRINT_ERR_HALT_MASK		0x0C
+#define JRINT_ERR_HALT_INPROGRESS	0x04
+#define JRINT_ERR_HALT_COMPLETE		0x08
+
+#define JR_REG_JRCR_VAL_RESET		0x00000001
+
+#define JR_REG_JRCFG_LO_ICTT_SHIFT	0x10
+#define JR_REG_JRCFG_LO_ICDCT_SHIFT	0x08
+#define JR_REG_JRCFG_LO_ICEN_EN		0x02
+
+/*
+ * Constants for Descriptor Processing errors
+ */
+#define SEC_HW_ERR_SSRC_NO_SRC		0x00
+#define SEC_HW_ERR_SSRC_CCB_ERR		0x02
+#define SEC_HW_ERR_SSRC_JMP_HALT_U	0x03
+#define SEC_HW_ERR_SSRC_DECO		0x04
+#define SEC_HW_ERR_SSRC_JR		0x06
+#define SEC_HW_ERR_SSRC_JMP_HALT_COND   0x07
+
+#define SEC_HW_ERR_DECO_HFN_THRESHOLD   0xF1
+#define SEC_HW_ERR_CCB_ICV_CHECK_FAIL   0x0A
+
+/*
+ * Constants for descriptors
+ */
+/* Return higher 32 bits of physical address */
+#define PHYS_ADDR_HI(phys_addr) \
+	    (uint32_t)(((uint64_t)phys_addr) >> 32)
+
+/* Return lower 32 bits of physical address */
+#define PHYS_ADDR_LO(phys_addr) \
+	    (uint32_t)(((uint64_t)phys_addr) & 0xFFFFFFFF)
+
+/*
+ * Macros for extracting error codes for the job ring
+ */
+#define JR_REG_JRINT_ERR_TYPE_EXTRACT(value)      ((value) & 0x00000F00)
+#define JR_REG_JRINT_ERR_ORWI_EXTRACT(value)     \
+	(((value) & 0x3FFF0000) >> JR_REG_JRINT_ERR_ORWI_SHIFT)
+#define JR_REG_JRINT_JRE_EXTRACT(value)	   ((value) & JRINT_JRE)
+
+/*
+ * Macros for managing the job ring
+ */
+/* Read pointer to job ring input ring start address */
+#if defined(RTE_ARCH_ARM64)
+#define hw_get_inp_queue_base(jr) ((((dma_addr_t)GET_JR_REG(IRBA, \
+				      (jr))) << 32) | \
+				      (GET_JR_REG_LO(IRBA, (jr))))
+
+/* Read pointer to job ring output ring start address */
+#define hw_get_out_queue_base(jr) (((dma_addr_t)(GET_JR_REG(ORBA, \
+				     (jr))) << 32) | \
+				     (GET_JR_REG_LO(ORBA, (jr))))
+#else
+#define hw_get_inp_queue_base(jr)   ((dma_addr_t)(GET_JR_REG_LO(IRBA, (jr))))
+
+#define hw_get_out_queue_base(jr)   ((dma_addr_t)(GET_JR_REG_LO(ORBA, (jr))))
+#endif
+
+/*
+ * IRJA - Input Ring Jobs Added Register shows
+ * how many new jobs were added to the Input Ring.
+ */
+#define hw_enqueue_desc_on_job_ring(job_ring) SET_JR_REG(IRJA, (job_ring), 1)
+
+#define hw_set_input_ring_size(job_ring, size) SET_JR_REG(IRSR, job_ring, \
+							 (size))
+
+#define hw_set_output_ring_size(job_ring, size) SET_JR_REG(ORSR, job_ring, \
+							  (size))
+
+#if defined(RTE_ARCH_ARM64)
+#define hw_set_input_ring_start_addr(job_ring, start_addr)	\
+{								\
+	SET_JR_REG(IRBA, job_ring, PHYS_ADDR_HI(start_addr));	\
+	SET_JR_REG_LO(IRBA, job_ring, PHYS_ADDR_LO(start_addr));\
+}
+
+#define hw_set_output_ring_start_addr(job_ring, start_addr) \
+{								\
+	SET_JR_REG(ORBA, job_ring, PHYS_ADDR_HI(start_addr));	\
+	SET_JR_REG_LO(ORBA, job_ring, PHYS_ADDR_LO(start_addr));\
+}
+
+#else
+#define hw_set_input_ring_start_addr(job_ring, start_addr)	\
+{								\
+	SET_JR_REG(IRBA, job_ring, 0);	\
+	SET_JR_REG_LO(IRBA, job_ring, PHYS_ADDR_LO(start_addr));\
+}
+
+#define hw_set_output_ring_start_addr(job_ring, start_addr) \
+{								\
+	SET_JR_REG(ORBA, job_ring, 0);	\
+	SET_JR_REG_LO(ORBA, job_ring, PHYS_ADDR_LO(start_addr));\
+}
+#endif
+
+/* ORJR - Output Ring Jobs Removed Register shows how many jobs were
+ * removed from the Output Ring for processing by software. This is done after
+ * the software has processed the entries.
+ */
+#define hw_remove_entries(jr, no_entries) SET_JR_REG(ORJR, (jr), (no_entries))
+
+/* IRSA - Input Ring Slots Available register holds the number of entries in
+ * the Job Ring's input ring. Once a job is enqueued, the value returned is
+ * decremented by the hardware by the number of jobs enqueued.
+ */
+#define hw_get_available_slots(jr)		GET_JR_REG(IRSA, jr)
+
+/* ORSFR - Output Ring Slots Full register holds the number of jobs which were
+ * processed by the SEC and can be retrieved by the software. Once a job has
+ * been processed by software, the user will call hw_remove_one_entry in order
+ * to notify the SEC that the entry was processed.
+ */
+#define hw_get_no_finished_jobs(jr)		GET_JR_REG(ORSFR, jr)
+
+/*
+ * Macros for manipulating JR registers
+ */
+#if CORE_BYTE_ORDER == CAAM_BYTE_ORDER
+#define sec_read_32(addr)	(*(volatile unsigned int *)(addr))
+#define sec_write_32(addr, val)	(*(volatile unsigned int *)(addr) = (val))
+
+#else
+#define sec_read_32(addr)	rte_bswap32((*(volatile unsigned int *)(addr)))
+#define sec_write_32(addr, val) \
+			(*(volatile unsigned int *)(addr) = rte_bswap32(val))
+#endif
+
+#if CAAM_BYTE_ORDER == __LITTLE_ENDIAN
+#define sec_read_64(addr)	(((u64)sec_read_32((u32 *)(addr) + 1) << 32) | \
+				(sec_read_32((u32 *)(addr))))
+
+#define sec_write_64(addr, val) {				\
+	sec_write_32((u32 *)(addr) + 1, (u32)((val) >> 32));	\
+	sec_write_32((u32 *)(addr), (u32)(val));		\
+}
+#else /* CAAM_BYTE_ORDER == __BIG_ENDIAN */
+#define sec_read_64(addr)	(((u64)sec_read_32((u32 *)(addr)) << 32) | \
+				(sec_read_32((u32 *)(addr) + 1)))
+
+#define sec_write_64(addr, val) {				\
+	sec_write_32((u32 *)(addr), (u32)((val) >> 32));	\
+	sec_write_32((u32 *)(addr) + 1, (u32)(val));		\
+}
+#endif
+
+#if defined(RTE_ARCH_ARM64)
+#define sec_read_addr(a)	sec_read_64((a))
+#define sec_write_addr(a, v)	sec_write_64((a), (v))
+#else
+#define sec_read_addr(a)	sec_read_32((a))
+#define sec_write_addr(a, v)	sec_write_32((a), (v))
+#endif
+
+#define JR_REG(name, jr)	(CHAN_BASE(jr) + JR_REG_##name##_OFFSET)
+#define JR_REG_LO(name, jr)	(CHAN_BASE(jr) + JR_REG_##name##_OFFSET_LO)
+
+#define GET_JR_REG(name, jr)	(sec_read_32(JR_REG(name, (jr))))
+#define GET_JR_REG_LO(name, jr)	(sec_read_32(JR_REG_LO(name, (jr))))
+
+#define SET_JR_REG(name, jr, value) \
+				(sec_write_32(JR_REG(name, (jr)), value))
+#define SET_JR_REG_LO(name, jr, value) \
+				(sec_write_32(JR_REG_LO(name, (jr)), value))
+
+/* Lists the possible states for a job ring. */
+typedef enum sec_job_ring_state_e {
+	SEC_JOB_RING_STATE_STARTED,	/* Job ring is initialized */
+	SEC_JOB_RING_STATE_RESET,	/* Job ring reset is in progress */
+} sec_job_ring_state_t;
+
+/* code or cmd block to caam */
+struct sec_cdb {
+	struct {
+		union {
+			uint32_t word;
+			struct {
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+				uint16_t rsvd63_48;
+				unsigned int rsvd47_39:9;
+				unsigned int idlen:7;
+#else
+				unsigned int idlen:7;
+				unsigned int rsvd47_39:9;
+				uint16_t rsvd63_48;
+#endif
+			} field;
+		} __rte_packed hi;
+
+		union {
+			uint32_t word;
+			struct {
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+				unsigned int rsvd31_30:2;
+				unsigned int fsgt:1;
+				unsigned int lng:1;
+				unsigned int offset:2;
+				unsigned int abs:1;
+				unsigned int add_buf:1;
+				uint8_t pool_id;
+				uint16_t pool_buffer_size;
+#else
+				uint16_t pool_buffer_size;
+				uint8_t pool_id;
+				unsigned int add_buf:1;
+				unsigned int abs:1;
+				unsigned int offset:2;
+				unsigned int lng:1;
+				unsigned int fsgt:1;
+				unsigned int rsvd31_30:2;
+#endif
+			} field;
+		} __rte_packed lo;
+	} __rte_packed sh_hdr;
+
+	uint32_t sh_desc[SEC_JOB_DESCRIPTOR_SIZE];
+};
+
+struct caam_jr_qp {
+	struct sec_job_ring_t *ring;
+	uint64_t rx_pkts;
+	uint64_t rx_errs;
+	uint64_t rx_poll_err;
+	uint64_t tx_pkts;
+	uint64_t tx_errs;
+	uint64_t tx_ring_full;
+};
+
+struct sec_job_ring_t {
+	/* TODO: Add wrapper macro to make it obvious this is the consumer index
+	 * on the output ring
+	 */
+	uint32_t cidx;		/* Consumer index for job ring (jobs array).
+				 * @note: cidx and pidx are accessed from
+				 * different threads. Place the cidx and pidx
+				 * inside the structure so that they lay on
+				 * different cachelines, to avoid false sharing
+				 * between threads when the threads run on
+				 * different cores!
+				 */
+	/* TODO: Add wrapper macro to make it obvious this is the producer index
+	 * on the input ring
+	 */
+	uint32_t pidx;		/* Producer index for job ring (jobs array) */
+
+	phys_addr_t *input_ring;/* Ring of output descriptors received from SEC.
+				 * Size of array is power of 2 to allow fast
+				 * update of producer/consumer indexes with
+				 * bitwise operations.
+				 */
+
+	struct sec_outring_entry *output_ring;
+				/* Ring of output descriptors received from SEC.
+				 * Size of array is power of 2 to allow fast
+				 * update of producer/consumer indexes with
+				 * bitwise operations.
+				 */
+
+	uint32_t irq_fd;	/* The file descriptor used for polling from
+				 * user space for interrupts notifications
+				 */
+	uint32_t jr_mode;	/* Model used by SEC Driver to receive
+				 * notifications from SEC.  Can be either
+				 * of the three: #SEC_NOTIFICATION_TYPE_NAPI
+				 * #SEC_NOTIFICATION_TYPE_IRQ or
+				 * #SEC_NOTIFICATION_TYPE_POLL
+				 */
+	uint32_t napi_mode;	/* Job ring mode if NAPI mode is chosen
+				 * Used only when jr_mode is set to
+				 * #SEC_NOTIFICATION_TYPE_NAPI
+				 */
+	void *register_base_addr;	/* Base address for SEC's
+					 * register memory for this job ring.
+					 */
+	uint8_t coalescing_en;		/* notifies if coelescing is
+					 * enabled for the job ring
+					 */
+	sec_job_ring_state_t jr_state;	/* The state of this job ring */
+
+	struct rte_mempool *ctx_pool;   /* per dev mempool for caam_jr_op_ctx */
+	unsigned int max_nb_queue_pairs;
+	unsigned int max_nb_sessions;
+	struct caam_jr_qp qps[RTE_CAAM_MAX_NB_SEC_QPS]; /* i/o queue for sec */
+};
+
+/* Union describing the possible error codes that
+ * can be set in the descriptor status word
+ */
+union hw_error_code {
+	uint32_t error;
+	union {
+		struct {
+			uint32_t ssrc:4;
+			uint32_t ssed_val:28;
+		} __rte_packed value;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t res:28;
+		} __rte_packed no_status_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t cha_id:4;
+			uint32_t err_id:4;
+		} __rte_packed ccb_status_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t offset:8;
+		} __rte_packed jmp_halt_user_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t desc_err:8;
+		} __rte_packed deco_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t res:17;
+			uint32_t naddr:3;
+			uint32_t desc_err:8;
+		} __rte_packed jr_src;
+		struct {
+			uint32_t ssrc:4;
+			uint32_t jmp:1;
+			uint32_t res:11;
+			uint32_t desc_idx:8;
+			uint32_t cond:8;
+		} __rte_packed jmp_halt_cond_src;
+	} __rte_packed error_desc;
+} __rte_packed;
+
+/* @brief Initialize a job ring/channel in SEC device.
+ * Write configuration register/s to properly initialize a job ring.
+ *
+ * @param [in] job_ring     The job ring
+ *
+ * @retval 0 for success
+ * @retval other for error
+ */
+int hw_reset_job_ring(struct sec_job_ring_t *job_ring);
+
+/* @brief Reset a job ring/channel in SEC device.
+ * Write configuration register/s to reset a job ring.
+ *
+ * @param [in] job_ring     The job ring
+ *
+ * @retval 0 for success
+ * @retval -1 in case job ring reset failed
+ */
+int hw_shutdown_job_ring(struct sec_job_ring_t *job_ring);
+
+/* @brief Handle a job ring/channel error in SEC device.
+ * Identify the error type and clear error bits if required.
+ *
+ * @param [in]  job_ring	The job ring
+ * @param [in]  sec_error_code  The job ring's error code
+ */
+void hw_handle_job_ring_error(struct sec_job_ring_t *job_ring,
+			      uint32_t sec_error_code);
+
+/* @brief Handle a job ring error in the device.
+ * Identify the error type and printout a explanatory
+ * messages.
+ *
+ * @param [in]  job_ring	The job ring
+ *
+ */
+void hw_job_ring_error_print(struct sec_job_ring_t *job_ring, int code);
+
+/* @brief Set interrupt coalescing parameters on the Job Ring.
+ * @param [in]  job_ring		The job ring
+ * @param [in]  irq_coalesing_timer     Interrupt coalescing timer threshold.
+ *					This value determines the maximum
+ *					amount of time after processing a
+ *					descriptor before raising an interrupt.
+ * @param [in]  irq_coalescing_count    Interrupt coalescing descriptor count
+ *					threshold.
+ */
+int hw_job_ring_set_coalescing_param(struct sec_job_ring_t *job_ring,
+				     uint16_t irq_coalescing_timer,
+				     uint8_t irq_coalescing_count);
+
+/* @brief Enable interrupt coalescing on a job ring
+ * @param [in]  job_ring		The job ring
+ */
+int hw_job_ring_enable_coalescing(struct sec_job_ring_t *job_ring);
+
+/* @brief Disable interrupt coalescing on a job ring
+ * @param [in]  job_ring		The job ring
+ */
+int hw_job_ring_disable_coalescing(struct sec_job_ring_t *job_ring);
+
+#endif /* CAAM_JR_HW_SPECIFIC_H */
diff --git a/drivers/crypto/caam_jr/caam_jr_pvt.h b/drivers/crypto/caam_jr/caam_jr_pvt.h
new file mode 100644
index 000000000..58fd257fc
--- /dev/null
+++ b/drivers/crypto/caam_jr/caam_jr_pvt.h
@@ -0,0 +1,286 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2017-2018 NXP
+ */
+
+#ifndef CAAM_JR_PVT_H
+#define CAAM_JR_PVT_H
+
+/* NXP CAAM JR PMD device name */
+
+#define CAAM_JR_ALG_UNSUPPORT	(-1)
+
+/* Minimum job descriptor consists of a oneword job descriptor HEADER and
+ * a pointer to the shared descriptor.
+ */
+#define MIN_JOB_DESC_SIZE	(CAAM_CMD_SZ + CAAM_PTR_SZ)
+#define CAAM_JOB_DESC_SIZE	13
+
+/* CTX_POOL_NUM_BUFS is set as per the ipsec-secgw application */
+#define CTX_POOL_NUM_BUFS	32000
+#define CTX_POOL_CACHE_SIZE	512
+
+#define DIR_ENC                 1
+#define DIR_DEC                 0
+
+#define JR_MAX_NB_MAX_DIGEST	32
+
+#define RTE_CAAM_JR_PMD_MAX_NB_SESSIONS 2048
+
+
+/* Return codes for SEC user space driver APIs */
+enum sec_return_code_e {
+	SEC_SUCCESS = 0,	       /* Operation executed successfully.*/
+	SEC_INVALID_INPUT_PARAM,       /* API received an invalid input
+					* parameter
+					*/
+	SEC_OUT_OF_MEMORY,	       /* Memory allocation failed. */
+	SEC_DESCRIPTOR_IN_FLIGHT,      /* API function indicates there are
+					* descriptors in flight
+					* for SEC to process.
+					*/
+	SEC_LAST_DESCRIPTOR_IN_FLIGHT, /* API function indicates there is one
+					* last descriptor in flight
+					* for SEC to process that.
+					*/
+	SEC_PROCESSING_ERROR,	       /* Indicates a SEC processing error
+					* occurred on a Job Ring which requires
+					* a SEC user space driver shutdown. Can
+					* be returned from sec_poll_job_ring().
+					* Then the only other API that can be
+					* called after this error is
+					* sec_release().
+					*/
+	SEC_DESC_PROCESSING_ERROR,     /* Indicates a SEC descriptor processing
+					* error occurred on a Job Ring. Can be
+					* returned from sec_poll_job_ring().
+					* The driver was able to reset job ring
+					* and job ring can be used like in a
+					* normal case.
+					*/
+	SEC_JR_IS_FULL,			/* Job Ring is full. There is no more
+					 * room in the JR for new descriptors.
+					 * This can happen if the descriptor RX
+					 * rate is higher than SEC's capacity.
+					 */
+	SEC_DRIVER_RELEASE_IN_PROGRESS, /* SEC driver shutdown is in progress,
+					 * descriptors processing or polling is
+					 * allowed.
+					 */
+	SEC_DRIVER_ALREADY_INITIALIZED, /* SEC driver is already initialized.*/
+	SEC_DRIVER_NOT_INITIALIZED,	/* SEC driver is NOT initialized. */
+	SEC_JOB_RING_RESET_IN_PROGRESS, /* Job ring is resetting due to a
+					 * per-descriptor SEC processing error
+					 * ::SEC_desc_PROCESSING_ERROR. Reset is
+					 * finished when sec_poll_job_ring()
+					 * return. Then the job ring can be used
+					 * again.
+					 */
+	SEC_RESET_ENGINE_FAILED,	/* Resetting of SEC Engine by SEC Kernel
+					 * Driver Failed
+					 */
+	SEC_ENABLE_IRQS_FAILED,		/* Enabling of IRQs in SEC Kernel Driver
+					 * Failed
+					 */
+	SEC_DISABLE_IRQS_FAILED,	/* Disabling of IRQs in SEC Kernel
+					 * Driver Failed
+					 */
+	/* END OF VALID VALUES */
+
+	SEC_RETURN_CODE_MAX_VALUE,	/* Invalid value for return code. It is
+					 * used to mark the end of the return
+					 * code values. @note ALL new return
+					 * code values MUST be added before
+					 * ::SEC_RETURN_CODE_MAX_VALUE!
+					 */
+};
+
+enum caam_jr_op_type {
+	CAAM_JR_NONE,  /* No Cipher operations*/
+	CAAM_JR_CIPHER,/* CIPHER operations */
+	CAAM_JR_AUTH,  /* Authentication Operations */
+	CAAM_JR_AEAD,  /* Authenticated Encryption with associated data */
+	CAAM_JR_IPSEC, /* IPSEC protocol operations*/
+	CAAM_JR_PDCP,  /* PDCP protocol operations*/
+	CAAM_JR_PKC,   /* Public Key Cryptographic Operations */
+	CAAM_JR_MAX
+};
+
+struct caam_jr_session {
+	uint8_t dir;         /* Operation Direction */
+	enum rte_crypto_cipher_algorithm cipher_alg; /* Cipher Algorithm*/
+	enum rte_crypto_auth_algorithm auth_alg; /* Authentication Algorithm*/
+	enum rte_crypto_aead_algorithm aead_alg; /* AEAD Algorithm*/
+	union {
+		struct {
+			uint8_t *data;	/* pointer to key data */
+			size_t length;	/* key length in bytes */
+		} aead_key;
+		struct {
+			struct {
+				uint8_t *data;	/* pointer to key data */
+				size_t length;	/* key length in bytes */
+			} cipher_key;
+			struct {
+				uint8_t *data;	/* pointer to key data */
+				size_t length;	/* key length in bytes */
+			} auth_key;
+		};
+	};
+	struct {
+		uint16_t length;
+		uint16_t offset;
+	} iv;	/* Initialisation vector parameters */
+	uint16_t auth_only_len; /* Length of data for Auth only */
+	uint32_t digest_length;
+	struct ip ip4_hdr;
+	struct caam_jr_qp *qp;
+	struct sec_cdb *cdb;	/* cmd block associated with qp */
+	struct rte_mempool *ctx_pool; /* session mempool for caam_jr_op_ctx */
+};
+
+/*
+ * 16-byte hardware scatter/gather table
+ */
+
+#define SEC4_SG_LEN_EXT		0x80000000	/* Entry points to table */
+#define SEC4_SG_LEN_FIN		0x40000000	/* Last ent in table */
+#define SEC4_SG_BPID_MASK	0x000000ff
+#define SEC4_SG_BPID_SHIFT	16
+#define SEC4_SG_LEN_MASK	0x3fffffff	/* Excludes EXT and FINAL */
+#define SEC4_SG_OFFSET_MASK	0x00001fff
+
+struct sec4_sg_entry {
+	uint64_t ptr;
+	uint32_t len;
+	uint32_t bpid_offset;
+};
+
+#define MAX_SG_ENTRIES		16
+#define SG_CACHELINE_0		0
+#define SG_CACHELINE_1		4
+#define SG_CACHELINE_2		8
+#define SG_CACHELINE_3		12
+
+/* Structure encompassing a job descriptor which is to be processed
+ * by SEC. User should also initialise this structure with the callback
+ * function pointer which will be called by driver after recieving proccessed
+ * descriptor from SEC. User data is also passed in this data structure which
+ * will be sent as an argument to the user callback function.
+ */
+struct job_descriptor {
+	uint32_t desc[CAAM_JOB_DESC_SIZE];
+};
+
+struct caam_jr_op_ctx {
+	struct job_descriptor jobdes;
+	/* sg[0] output, sg[1] input, others are possible sub frames */
+	struct sec4_sg_entry sg[MAX_SG_ENTRIES];
+	struct rte_crypto_op *op;
+	struct rte_mempool *ctx_pool; /* mempool pointer for caam_jr_op_ctx */
+	int64_t vtop_offset;
+	uint8_t digest[JR_MAX_NB_MAX_DIGEST];
+};
+
+/**
+ * Checksum
+ *
+ * @param buffer calculate chksum for buffer
+ * @param len    buffer length
+ *
+ * @return checksum value in host cpu order
+ */
+static inline uint16_t
+calc_chksum(void *buffer, int len)
+{
+	uint16_t *buf = (uint16_t *)buffer;
+	uint32_t sum = 0;
+	uint16_t result;
+
+	for (sum = 0; len > 1; len -= 2)
+		sum += *buf++;
+
+	if (len == 1)
+		sum += *(unsigned char *)buf;
+
+	sum = (sum >> 16) + (sum & 0xFFFF);
+	sum += (sum >> 16);
+	result = ~sum;
+
+	return  result;
+}
+struct uio_job_ring {
+	uint32_t jr_id;
+	uint32_t uio_fd;
+	void *register_base_addr;
+	int map_size;
+	int uio_minor_number;
+};
+
+int sec_cleanup(void);
+int sec_configure(void);
+struct uio_job_ring *config_job_ring(void);
+void free_job_ring(uint32_t uio_fd);
+
+/* For Dma memory allocation of specified length and alignment */
+static inline void *
+caam_jr_dma_mem_alloc(size_t align, size_t len)
+{
+	return rte_malloc("mem_alloc", len, align);
+}
+
+/* For freeing dma memory */
+static inline void
+caam_jr_dma_free(void *ptr)
+{
+	rte_free(ptr);
+}
+
+static inline rte_iova_t
+caam_jr_mem_vtop(void *vaddr)
+{
+	const struct rte_memseg *ms;
+
+	ms = rte_mem_virt2memseg(vaddr, NULL);
+	if (ms)
+		return ms->iova + RTE_PTR_DIFF(vaddr, ms->addr);
+	return (size_t)NULL;
+}
+
+static inline void *
+caam_jr_dma_ptov(rte_iova_t paddr)
+{
+	return rte_mem_iova2virt(paddr);
+}
+
+/* Virtual to physical address conversion */
+static inline rte_iova_t caam_jr_dma_vtop(void *ptr)
+{
+	return caam_jr_mem_vtop(ptr);
+}
+
+/** @brief Request to SEC kernel driver to enable interrupts for
+ *         descriptor finished processing
+ *  Use UIO to communicate with SEC kernel driver: write command
+ *  value that indicates an IRQ enable action into UIO file descriptor
+ *  of this job ring.
+ *
+ * @param [in]  uio_fd     Job Ring UIO File descriptor
+ * @retval 0 for success
+ * @retval -1 value for error
+ */
+uint32_t caam_jr_enable_irqs(uint32_t uio_fd);
+
+/** @brief Request to SEC kernel driver to disable interrupts for descriptor
+ *  finished processing
+ *  Use UIO to communicate with SEC kernel driver: write command
+ *  value that indicates an IRQ disable action into UIO file descriptor
+ *  of this job ring.
+ *
+ * @param [in]  uio_fd    UIO File descripto
+ * @retval 0 for success
+ * @retval -1 value for error
+ *
+ */
+uint32_t caam_jr_disable_irqs(uint32_t uio_fd);
+
+#endif
diff --git a/drivers/crypto/caam_jr/meson.build b/drivers/crypto/caam_jr/meson.build
index 3edd0a212..c282eb4dc 100644
--- a/drivers/crypto/caam_jr/meson.build
+++ b/drivers/crypto/caam_jr/meson.build
@@ -6,6 +6,9 @@ if host_machine.system() != 'linux'
 endif
 
 deps += ['bus_vdev', 'bus_dpaa', 'security']
-sources = files('caam_jr.c')
+sources = files('caam_jr_hw.c', 'caam_jr.c')
 
 allow_experimental_apis = true
+
+includes += include_directories('../dpaa2_sec/')
+includes += include_directories('../../bus/dpaa/include/')
-- 
2.17.1



More information about the dev mailing list