[dpdk-dev] [PATCH 5/5] app/testpmd: setup attached ports on probe event

Iremonger, Bernard bernard.iremonger at intel.com
Wed Oct 24 18:13:21 CEST 2018


Hi Thomas,

> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas at monjalon.net]
> Sent: Wednesday, October 24, 2018 2:41 PM
> To: Iremonger, Bernard <bernard.iremonger at intel.com>; Wu, Jingjing
> <jingjing.wu at intel.com>; Lu, Wenzhuo <wenzhuo.lu at intel.com>
> Cc: dev at dpdk.org; ophirmu at mellanox.com; wisamm at mellanox.com; Yigit,
> Ferruh <ferruh.yigit at intel.com>; arybchenko at solarflare.com
> Subject: [PATCH 5/5] app/testpmd: setup attached ports on probe event
> 
> After probing is done, each new port must be setup.
> The new ports are currently guessed by iterating on ports matching the devargs
> string used for probing.
> 
> When probing a port, it is possible that one more port probing get triggered (e.g.
> PF is automatically probed when probing a VF representor). Such automatic
> probing will be caught only on event.
> 
> The iterator loop may be replaced by a call from the event callback.
> In order to be able to test both modes, a command is added to choose between
> iterator and event modes.
> 
> Signed-off-by: Thomas Monjalon <thomas at monjalon.net>
> ---
>  app/test-pmd/cmdline.c                      | 57 +++++++++++++++++++++
>  app/test-pmd/testpmd.c                      | 27 ++++++++--
>  app/test-pmd/testpmd.h                      |  4 ++
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  9 ++++
>  4 files changed, 93 insertions(+), 4 deletions(-)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> f041a01aa..148bd6366 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -280,6 +280,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>  			"set portlist (x[,y]*)\n"
>  			"    Set the list of forwarding ports.\n\n"
> 
> +			"set port setup on (iterator|event)\n"
> +			"    Select how attached port is retrieved for setup.\n\n"
> +
>  			"set tx loopback (port_id) (on|off)\n"
>  			"    Enable or disable tx loopback.\n\n"
> 
> @@ -1249,6 +1252,59 @@ cmdline_parse_inst_t cmd_operate_specific_port =
> {
>  	},
>  };
> 
> +/* *** enable port setup (after attach) via iterator or event *** */
> +struct cmd_set_port_setup_on_result {
> +	cmdline_fixed_string_t set;
> +	cmdline_fixed_string_t port;
> +	cmdline_fixed_string_t setup;
> +	cmdline_fixed_string_t on;
> +	cmdline_fixed_string_t mode;
> +};
> +
> +static void cmd_set_port_setup_on_parsed(void *parsed_result,
> +				__attribute__((unused)) struct cmdline *cl,
> +				__attribute__((unused)) void *data) {
> +	struct cmd_set_port_setup_on_result *res = parsed_result;
> +
> +	if (strcmp(res->mode, "event") == 0)
> +		setup_on_probe_event = true;
> +	else if (strcmp(res->mode, "iterator") == 0)
> +		setup_on_probe_event = false;
> +	else
> +		printf("Unknown mode\n");
> +}
> +
> +cmdline_parse_token_string_t cmd_set_port_setup_on_set =
> +	TOKEN_STRING_INITIALIZER(struct cmd_set_port_setup_on_result,
> +			set, "set");
> +cmdline_parse_token_string_t cmd_set_port_setup_on_port =
> +	TOKEN_STRING_INITIALIZER(struct cmd_set_port_setup_on_result,
> +			port, "port");
> +cmdline_parse_token_string_t cmd_set_port_setup_on_setup =
> +	TOKEN_STRING_INITIALIZER(struct cmd_set_port_setup_on_result,
> +			setup, "setup");
> +cmdline_parse_token_string_t cmd_set_port_setup_on_on =
> +	TOKEN_STRING_INITIALIZER(struct cmd_set_port_setup_on_result,
> +			on, "on");
> +cmdline_parse_token_string_t cmd_set_port_setup_on_mode =
> +	TOKEN_STRING_INITIALIZER(struct cmd_set_port_setup_on_result,
> +			mode, "iterator#event");
> +
> +cmdline_parse_inst_t cmd_set_port_setup_on = {
> +	.f = cmd_set_port_setup_on_parsed,
> +	.data = NULL,
> +	.help_str = "set port setup on iterator|event",
> +	.tokens = {
> +		(void *)&cmd_set_port_setup_on_set,
> +		(void *)&cmd_set_port_setup_on_port,
> +		(void *)&cmd_set_port_setup_on_setup,
> +		(void *)&cmd_set_port_setup_on_on,
> +		(void *)&cmd_set_port_setup_on_mode,
> +		NULL,
> +	},
> +};
> +
>  /* *** attach a specified port *** */
>  struct cmd_operate_attach_port_result {
>  	cmdline_fixed_string_t port;
> @@ -17796,6 +17852,7 @@ cmdline_parse_ctx_t main_ctx[] = {
>  	(cmdline_parse_inst_t *)&cmd_operate_specific_port,
>  	(cmdline_parse_inst_t *)&cmd_operate_attach_port,
>  	(cmdline_parse_inst_t *)&cmd_operate_detach_port,
> +	(cmdline_parse_inst_t *)&cmd_set_port_setup_on,
>  	(cmdline_parse_inst_t *)&cmd_config_speed_all,
>  	(cmdline_parse_inst_t *)&cmd_config_speed_specific,
>  	(cmdline_parse_inst_t *)&cmd_config_loopback_all, diff --git
> a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> 6eb416e7a..abecb58bf 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -345,6 +345,9 @@ uint8_t rmv_interrupt = 1; /* enabled by default */
> 
>  uint8_t hot_plug = 0; /**< hotplug disabled by default. */
> 
> +/* After attach, port setup is called on event or by iterator */ bool
> +setup_on_probe_event = true;
> +
>  /* Pretty printing of ethdev events */
>  static const char * const eth_event_desc[] = {
>  	[RTE_ETH_EVENT_UNKNOWN] = "unknown",
> @@ -2280,7 +2283,7 @@ reset_port(portid_t pid)  void  attach_port(char
> *identifier)  {
> -	portid_t pi = 0;
> +	portid_t pi;
>  	struct rte_dev_iterator iterator;
> 
>  	printf("Attaching a new port...\n");
> @@ -2295,7 +2298,19 @@ attach_port(char *identifier)
>  		return;
>  	}
> 
> +	/* first attach mode: event */
> +	if (setup_on_probe_event) {
> +		/* new ports are detected on RTE_ETH_EVENT_NEW event */
> +		for (pi = 0; pi < RTE_MAX_ETHPORTS; pi++)
> +			if (ports[pi].port_status == RTE_PORT_HANDLING &&
> +					ports[pi].need_setup != 0)
> +				setup_attached_port(pi);
> +		return;
> +	}
> +
> +	/* second attach mode: iterator */
>  	RTE_ETH_FOREACH_MATCHING_DEV(pi, identifier, &iterator) {
> +		/* setup ports matching the devargs used for probing */
>  		if (port_is_forwarding(pi))
>  			continue; /* port was already attached before */
>  		setup_attached_port(pi);
> @@ -2317,6 +2332,7 @@ setup_attached_port(portid_t pi)
>  	ports_ids[nb_ports++] = pi;
>  	fwd_ports_ids[nb_fwd_ports++] = pi;
>  	nb_cfg_ports = nb_fwd_ports;
> +	ports[pi].need_setup = 0;
>  	ports[pi].port_status = RTE_PORT_STOPPED;
> 
>  	printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports); @@
> -2535,11 +2551,14 @@ eth_event_callback(portid_t port_id, enum
> rte_eth_event_type type, void *param,
>  		fflush(stdout);
>  	}
> 
> -	if (port_id_is_invalid(port_id, DISABLED_WARN))
> -		return 0;
> -
>  	switch (type) {
> +	case RTE_ETH_EVENT_NEW:
> +		ports[port_id].need_setup = 1;
> +		ports[port_id].port_status = RTE_PORT_HANDLING;
> +		break;
>  	case RTE_ETH_EVENT_INTR_RMV:
> +		if (port_id_is_invalid(port_id, DISABLED_WARN))
> +			break;
>  		if (rte_eal_alarm_set(100000,
>  				rmv_event_callback, (void *)(intptr_t)port_id))
>  			fprintf(stderr, "Could not set up deferred device
> removal\n"); diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 646e44940..28f13f630 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -5,6 +5,8 @@
>  #ifndef _TESTPMD_H_
>  #define _TESTPMD_H_
> 
> +#include <stdbool.h>
> +
>  #include <rte_pci.h>
>  #include <rte_bus_pci.h>
>  #include <rte_gro.h>
> @@ -179,6 +181,7 @@ struct rte_port {
>  	uint8_t                 tx_queue_stats_mapping_enabled;
>  	uint8_t                 rx_queue_stats_mapping_enabled;
>  	volatile uint16_t        port_status;    /**< port started or not */
> +	uint8_t                 need_setup;     /**< port just attached */
>  	uint8_t                 need_reconfig;  /**< need reconfiguring port or not */
>  	uint8_t                 need_reconfig_queues; /**< need reconfiguring queues
> or not */
>  	uint8_t                 rss_flag;   /**< enable rss or not */
> @@ -326,6 +329,7 @@ extern uint8_t lsc_interrupt; /**< disabled by "--no-lsc-
> interrupt" parameter */  extern uint8_t rmv_interrupt; /**< disabled by "--no-
> rmv-interrupt" parameter */  extern uint32_t event_print_mask;  /**< set by "--
> print-event xxxx" and "--mask-event xxxx parameters */
> +extern bool setup_on_probe_event; /**< disabled by port setup-on
> +iterator */
>  extern uint8_t hot_plug; /**< enable by "--hot-plug" parameter */  extern int
> do_mlockall; /**< set by "--mlockall" or "--no-mlockall" parameter */
> 
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index d712bb657..8447f6c89 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -603,6 +603,15 @@ For example, to change the port forwarding:
>     RX P=1/Q=0 (socket 0) -> TX P=3/Q=0 (socket 0) peer=02:00:00:00:00:03
>     RX P=3/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:02
> 
> +set port setup on
> +~~~~~~~~~~~~~~~~~
> +
> +Select how to retrieve new ports created after "port attach" command.
> +
> +For each new port, a setup is done.
> +It will find the probed ports via RTE_ETH_FOREACH_MATCHING_DEV loop in
> +iterator mode, or via RTE_ETH_EVENT_NEW in event mode.
> +

It would be useful to add an example command here (similar to other commands).

>  set tx loopback
>  ~~~~~~~~~~~~~~~
> 
> --
> 2.19.0

Regards,

Bernard.




More information about the dev mailing list