[dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap action to Direct Verbs

Dekel Peled dekelp at mellanox.com
Mon Oct 29 17:46:11 CET 2018


Thanks, PSB.

> -----Original Message-----
> From: Shahaf Shuler
> Sent: Monday, October 29, 2018 12:03 PM
> To: Dekel Peled <dekelp at mellanox.com>; Yongseok Koh
> <yskoh at mellanox.com>
> Cc: dev at dpdk.org; Ori Kam <orika at mellanox.com>
> Subject: RE: [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap action to
> Direct Verbs
> 
> Thursday, October 25, 2018 11:08 PM, Dekel Peled:
> > Subject: [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap action to
> > Direct Verbs
> >
> > This patch implements the VXLAN decap action in DV flow for MLX5 PMD.
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> > ---
> >  drivers/net/mlx5/mlx5_flow.h    |   1 +
> >  drivers/net/mlx5/mlx5_flow_dv.c | 103
> > ++++++++++++++++++++++++++++++++++++++--
> >  2 files changed, 100 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.h
> > b/drivers/net/mlx5/mlx5_flow.h index 6e92afe..3795644 100644
> > --- a/drivers/net/mlx5/mlx5_flow.h
> > +++ b/drivers/net/mlx5/mlx5_flow.h
> > @@ -93,6 +93,7 @@
> >  #define MLX5_FLOW_ACTION_SET_MAC_SRC (1u << 20)  #define
> > MLX5_FLOW_ACTION_SET_MAC_DST (1u << 21)  #define
> > MLX5_FLOW_ACTION_VXLAN_ENCAP (1u << 22)
> > +#define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23)
> >
> >  #define MLX5_FLOW_FATE_ACTIONS \
> >  	(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
> > MLX5_FLOW_ACTION_RSS) diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> > b/drivers/net/mlx5/mlx5_flow_dv.c index 14110c5..e84a2b6 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -131,11 +131,12 @@
> >  		return rte_flow_error_set(error, EINVAL,
> >  					  RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> >  					  "can't drop and encap in same
> > flow");
> > -	if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
> > +	if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> > +			    MLX5_FLOW_ACTION_VXLAN_DECAP))
> >  		return rte_flow_error_set(error, EINVAL,
> >  					  RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > -					  "can only have a single encap"
> > -					  " action in a flow");
> > +					  "can only have a single encap or"
> > +					  " decap action in a flow");
> >  	if (attr->ingress)
> >  		return rte_flow_error_set(error, ENOTSUP,
> >
> > RTE_FLOW_ERROR_TYPE_ATTR_INGRESS, @@ -146,6 +147,47 @@  }
> >
> >  /**
> > + * Validate the L2 decap action.
> > + * Used for VXLAN decap action.
> 
> Same like before

I will remove it.

> 
> > + *
> > + * @param[in] action_flags
> > + *   Holds the actions detected until now.
> > + * @param[in] action
> > + *   Pointer to the decap action.
> > + * @param[in] attr
> > + *   Pointer to flow attributes
> > + * @param[out] error
> > + *   Pointer to error structure.
> > + *
> > + * @return
> > + *   0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_l2_decap(uint64_t action_flags,
> > +			const struct rte_flow_action *action __rte_unused,
> > +			const struct rte_flow_attr *attr,
> > +			struct rte_flow_error *error)
> > +{
> > +	if (action_flags & MLX5_FLOW_ACTION_DROP)
> > +		return rte_flow_error_set(error, EINVAL,
> > +					  RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > +					  "can't drop and decap in same
> > flow");
> > +	if (action_flags & (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> > +			    MLX5_FLOW_ACTION_VXLAN_DECAP))
> > +		return rte_flow_error_set(error, EINVAL,
> > +					  RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > +					  "can only have a single encap or"
> > +					  " decap action in a flow");
> > +	if (attr->egress)
> > +		return rte_flow_error_set(error, ENOTSUP,
> > +
> > RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > +					  NULL,
> > +					  "decap action not supported for "
> > +					  "egress");
> > +	return 0;
> > +}
> > +
> > +/**
> >   * Get the size of specific rte_flow_item_type
> >   *
> >   * @param[in] item_type
> > @@ -396,6 +438,38 @@
> >  }
> >
> >  /**
> > + * Convert L2 decap action to DV specification.
> > + * Used for VXLAN decap action.
> 
> Same

I will remove it.

> 
> > + *
> > + * @param[in] dev
> > + *   Pointer to rte_eth_dev structure.
> > + * @param[in] action
> > + *   Pointer to action structure.
> > + * @param[out] error
> > + *   Pointer to the error structure.
> > + *
> > + * @return
> > + *   Pointer to action on success, NULL otherwise and rte_errno is set.
> > + */
> > +static struct ibv_flow_action *
> > +flow_dv_create_action_l2_decap(struct rte_eth_dev *dev,
> > +			const struct rte_flow_action *action __rte_unused,
> > +			struct rte_flow_error *error)
> > +{
> > +	struct ibv_flow_action *verbs_action = NULL;
> > +	struct priv *priv = dev->data->dev_private;
> > +
> > +	verbs_action = mlx5_glue-
> > >dv_create_flow_action_packet_reformat
> > +		(priv->ctx, 0, NULL,
> > +
> > MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TUNNEL_TO_L2,
> > +		 MLX5DV_FLOW_TABLE_TYPE_NIC_RX);
> > +	if (!verbs_action)
> > +		rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > +				   NULL, "cannot create L2 decap action");
> > +	return verbs_action;
> > +}
> > +
> > +/**
> >   * Verify the @p attributes will be correctly understood by the NIC and
> store
> >   * them in the @p flow if everything is correct.
> >   *
> > @@ -648,7 +722,15 @@
> >  			action_flags |=
> > MLX5_FLOW_ACTION_VXLAN_ENCAP;
> >  			++actions_n;
> >  			break;
> > -
> > +		case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> > +			ret =
> > flow_dv_validate_action_l2_decap(action_flags,
> > +							       actions, attr,
> > +							       error);
> > +			if (ret < 0)
> > +				return ret;
> > +			action_flags |=
> > MLX5_FLOW_ACTION_VXLAN_DECAP;
> > +			++actions_n;
> > +			break;
> >  		default:
> >  			return rte_flow_error_set(error, ENOTSUP,
> >
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > @@ -1435,6 +1517,19 @@
> >  		flow->actions |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
> >  		actions_n++;
> >  		break;
> > +	case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> > +		dev_flow->dv.actions[actions_n].type =
> > +			MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > +		dev_flow->dv.actions[actions_n].action =
> > +				flow_dv_create_action_l2_decap(dev,
> > action,
> > +							       error);
> > +		if (!(dev_flow->dv.actions[actions_n].action))
> > +			return -rte_errno;
> > +		dev_flow->dv.verbs_action =
> > +			dev_flow->dv.actions[actions_n].action;
> > +		flow->actions |= MLX5_FLOW_ACTION_VXLAN_DECAP;
> > +		actions_n++;
> > +		break;
> >  	default:
> >  		break;
> >  	}
> > --
> > 1.8.3.1



More information about the dev mailing list