[dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap to Direct Verbs
Dekel Peled
dekelp at mellanox.com
Mon Oct 29 17:54:30 CET 2018
Thanks, PSB.
> -----Original Message-----
> From: Shahaf Shuler
> Sent: Monday, October 29, 2018 12:03 PM
> To: Dekel Peled <dekelp at mellanox.com>; Yongseok Koh
> <yskoh at mellanox.com>
> Cc: dev at dpdk.org; Ori Kam <orika at mellanox.com>
> Subject: RE: [dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap
> to Direct Verbs
>
> Thursday, October 25, 2018 11:08 PM, Dekel Peled:
> > Subject: [dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap
> > to Direct Verbs
> >
> > This patch implements the encap and decap actions, using raw data, in
> > DV flow for MLX5 PMD.
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> > ---
> > drivers/net/mlx5/mlx5_flow.h | 12 ++-
> > drivers/net/mlx5/mlx5_flow_dv.c | 227
> > ++++++++++++++++++++++++++++++++++++++--
> > 2 files changed, 224 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.h
> > b/drivers/net/mlx5/mlx5_flow.h index 2d73a05..92ba111 100644
> > --- a/drivers/net/mlx5/mlx5_flow.h
> > +++ b/drivers/net/mlx5/mlx5_flow.h
> > @@ -96,15 +96,19 @@
> > #define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23) #define
> > MLX5_FLOW_ACTION_NVGRE_ENCAP (1u << 24) #define
> > MLX5_FLOW_ACTION_NVGRE_DECAP (1u << 25)
> > +#define MLX5_FLOW_ACTION_RAW_ENCAP (1u << 26) #define
> > +MLX5_FLOW_ACTION_RAW_DECAP (1u << 27)
> >
> > #define MLX5_FLOW_FATE_ACTIONS \
> > (MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
> > MLX5_FLOW_ACTION_RSS)
> >
> > -#define MLX5_FLOW_ENCAP_ACTIONS \
> > - (MLX5_FLOW_ACTION_VXLAN_ENCAP |
> > MLX5_FLOW_ACTION_NVGRE_ENCAP)
> > +#define MLX5_FLOW_ENCAP_ACTIONS
> > (MLX5_FLOW_ACTION_VXLAN_ENCAP | \
> > + MLX5_FLOW_ACTION_NVGRE_ENCAP | \
> > + MLX5_FLOW_ACTION_RAW_ENCAP)
> >
> > -#define MLX5_FLOW_DECAP_ACTIONS \
> > - (MLX5_FLOW_ACTION_VXLAN_DECAP |
> > MLX5_FLOW_ACTION_NVGRE_DECAP)
> > +#define MLX5_FLOW_DECAP_ACTIONS
> > (MLX5_FLOW_ACTION_VXLAN_DECAP | \
> > + MLX5_FLOW_ACTION_NVGRE_DECAP | \
> > + MLX5_FLOW_ACTION_RAW_DECAP)
> >
> > #ifndef IPPROTO_MPLS
> > #define IPPROTO_MPLS 137
> > diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> > b/drivers/net/mlx5/mlx5_flow_dv.c index d7d0c6b..ca75645 100644
> > --- a/drivers/net/mlx5/mlx5_flow_dv.c
> > +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> > @@ -186,6 +186,82 @@
> > }
> >
> > /**
> > + * Validate the raw encap action.
> > + *
> > + * @param[in] action_flags
> > + * Holds the actions detected until now.
> > + * @param[in] action
> > + * Pointer to the encap action.
> > + * @param[in] attr
> > + * Pointer to flow attributes
> > + * @param[out] error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_raw_encap(uint64_t action_flags,
> > + const struct rte_flow_action *action,
> > + const struct rte_flow_attr *attr,
> > + struct rte_flow_error *error)
> > +{
> > + if (!(action->conf))
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > action,
> > + "configuration cannot be null");
> > + if (action_flags & MLX5_FLOW_ACTION_DROP)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > + "can't drop and encap in same
> > flow");
> > + if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > + "can only have a single encap"
> > + " action in a flow");
> > + /* encap without preceding decap is not supported for ingress */
> > + if (attr->ingress && !(action_flags &
> > MLX5_FLOW_ACTION_RAW_DECAP))
> > + return rte_flow_error_set(error, ENOTSUP,
> > +
> > RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> > + NULL,
> > + "encap action not supported for "
> > + "ingress");
>
> The error message doesn't seems informative enough.
This is the case when flow rule is created with ingress attribute, and only raw_encap action, without raw_decap.
I used the same error message as in L2 encap case.
>
> > + return 0;
> > +}
> > +
> > +/**
> > + * Validate the raw decap action.
> > + *
> > + * @param[in] action_flags
> > + * Holds the actions detected until now.
> > + * @param[out] error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * 0 on success, a negative errno value otherwise and rte_errno is set.
> > + */
> > +static int
> > +flow_dv_validate_action_raw_decap(uint64_t action_flags,
> > + struct rte_flow_error *error)
> > +{
> > + if (action_flags & MLX5_FLOW_ACTION_DROP)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > + "can't drop and decap in same
> > flow");
> > + if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > + "can't have encap action before"
> > + " decap action");
> > + if (action_flags & MLX5_FLOW_DECAP_ACTIONS)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > NULL,
> > + "can only have a single decap"
> > + " action in a flow");
>
> Just like you don't allow to do only encap w/o decap on ingress, on egress we
> cannot do only decap w/o a subsequent encap.
This validation was implemented during action creation, to save the checking of later actions.
I will move it to here.
>
> > + return 0;
> > +}
> > +
> > +/**
> > * Get the size of specific rte_flow_item_type
> > *
> > * @param[in] item_type
> > @@ -396,6 +472,7 @@
> > /**
> > * Convert L2 encap action to DV specification.
> > * Used for VXLAN and NVGRE encap actions.
> > + * Also used for raw encap action without preceding decap.
> > *
> > * @param[in] dev
> > * Pointer to rte_eth_dev structure.
> > @@ -414,23 +491,34 @@
> > {
> > struct ibv_flow_action *verbs_action = NULL;
> > const struct rte_flow_item *encap_data;
> > + const struct rte_flow_action_raw_encap *raw_encap_data;
>
> This one can be declared inside the if statement
I prefer all variable declarations at start of function.
>
> > struct priv *priv = dev->data->dev_private;
> > uint8_t buf[MLX5_ENCAP_MAX_LEN];
> > + uint8_t *buf_ptr = buf;
>
> Why you need this buf_ptr? Compilation issue with the fixed sized array of
> buf?
I needed it to refer to different buffers, raw buffer in raw_encap_data, or buffer converted from encap_data.
It will be removed now when moving to use cache.
>
> > size_t size = 0;
> > int convert_result = 0;
> >
> > - if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
> > - encap_data = ((const struct rte_flow_action_vxlan_encap *)
> > + if (action->type == RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
> > + raw_encap_data =
> > + (const struct rte_flow_action_raw_encap *)action-
> > >conf;
> > + buf_ptr = raw_encap_data->data;
> > + size = raw_encap_data->size;
> > + } else {
> > + if (action->type ==
> > RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
> > + encap_data =
> > + ((const struct rte_flow_action_vxlan_encap
> > *)
> > action->conf)->definition;
> > - else
> > - encap_data = ((const struct rte_flow_action_nvgre_encap *)
> > + else
> > + encap_data =
> > + ((const struct rte_flow_action_nvgre_encap
> > *)
> > action->conf)->definition;
> > - convert_result = flow_dv_convert_encap_data(encap_data, buf,
> > - &size, error);
> > - if (convert_result)
> > - return NULL;
> > + convert_result = flow_dv_convert_encap_data(encap_data,
> > buf,
> > + &size, error);
> > + if (convert_result)
> > + return NULL;
> > + }
> > verbs_action = mlx5_glue-
> > >dv_create_flow_action_packet_reformat
> > - (priv->ctx, size, (size ? buf : NULL),
> > + (priv->ctx, size, (size ? buf_ptr : NULL),
> >
> > MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
> > MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
> > if (!verbs_action)
> > @@ -472,6 +560,50 @@
> > }
> >
> > /**
> > + * Convert raw decap/encap (L3 tunnel) action to DV specification.
> > + *
> > + * @param[in] dev
> > + * Pointer to rte_eth_dev structure.
> > + * @param[in] action
> > + * Pointer to action structure.
> > + * @param[in] attr
> > + * Pointer to the flow attributes.
> > + * @param[out] error
> > + * Pointer to the error structure.
> > + *
> > + * @return
> > + * Pointer to action on success, NULL otherwise and rte_errno is set.
> > + */
> > +static struct ibv_flow_action *
> > +flow_dv_create_action_raw_encap(struct rte_eth_dev *dev,
>
> I would call it flow_dv_create_action_packet_reformat, as this is the only
> case this function is being called.
> For raw_encap only you will use the l2_encap function.
I prefer this name, since L2 and L3 encap and decap use mlx5dv packet reformat function.
>
> > + const struct rte_flow_action *action,
> > + const struct rte_flow_attr *attr,
> > + struct rte_flow_error *error)
> > +{
> > + struct ibv_flow_action *verbs_action = NULL;
> > + const struct rte_flow_action_raw_encap *encap_data;
> > + struct priv *priv = dev->data->dev_private;
> > + enum mlx5dv_flow_action_packet_reformat_type reformat_type;
> > + enum mlx5dv_flow_table_type ft_type;
> > +
> > + encap_data = (const struct rte_flow_action_raw_encap *)action-
> > >conf;
> > + reformat_type = attr->egress ?
> > +
> > MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TU
> > NNEL :
> > +
> > MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_T
> > O_L2;
> > + ft_type = attr->egress ?
> > + MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
> > + MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
> > + verbs_action = mlx5_glue-
> > >dv_create_flow_action_packet_reformat
> > + (priv->ctx, encap_data->size,
> > + (encap_data->size ? encap_data->data :
> > NULL),
> > + reformat_type, ft_type);
> > + if (!verbs_action)
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + NULL, "cannot create encap action");
> > + return verbs_action;
> > +}
> > +
> > +/**
> > * Verify the @p attributes will be correctly understood by the NIC and
> store
> > * them in the @p flow if everything is correct.
> > *
> > @@ -726,7 +858,6 @@
> >
> > RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP ?
> >
> > MLX5_FLOW_ACTION_VXLAN_ENCAP :
> >
> > MLX5_FLOW_ACTION_NVGRE_ENCAP;
> > -
> > ++actions_n;
> > break;
> > case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
> > @@ -740,7 +871,23 @@
> >
> > RTE_FLOW_ACTION_TYPE_VXLAN_DECAP ?
> >
> > MLX5_FLOW_ACTION_VXLAN_DECAP :
> >
> > MLX5_FLOW_ACTION_NVGRE_DECAP;
> > -
> > + ++actions_n;
> > + break;
> > + case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
> > + ret =
> > flow_dv_validate_action_raw_encap(action_flags,
> > + actions, attr,
> > + error);
> > + if (ret < 0)
> > + return ret;
> > + action_flags |= MLX5_FLOW_ACTION_RAW_ENCAP;
> > + ++actions_n;
> > + break;
> > + case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
> > + ret =
> > flow_dv_validate_action_raw_decap(action_flags,
> > + error);
> > + if (ret < 0)
> > + return ret;
> > + action_flags |= MLX5_FLOW_ACTION_RAW_DECAP;
> > ++actions_n;
> > break;
> > default:
> > @@ -1550,6 +1697,64 @@
> > MLX5_FLOW_ACTION_NVGRE_DECAP;
> > actions_n++;
> > break;
> > + case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
> > + /* Handle encap action with preceding decap */
> > + if (flow->actions & MLX5_FLOW_ACTION_RAW_DECAP) {
> > + dev_flow->dv.actions[actions_n].type =
> > +
> > MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_action_raw_encap
> > + (dev, action,
> > + attr, error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.verbs_action =
> > + dev_flow->dv.actions[actions_n].action;
> > + } else {
> > + /* Handle encap action without preceding decap */
> > + dev_flow->dv.actions[actions_n].type =
> > +
> > MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_action_l2_encap
> > + (dev, action, error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.verbs_action =
> > + dev_flow->dv.actions[actions_n].action;
> > + }
> > + flow->actions |= MLX5_FLOW_ACTION_RAW_ENCAP;
> > + actions_n++;
> > + break;
> > + case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
> > + /* Check if this decap action is followed by encap. */
> > + for (; action->type != RTE_FLOW_ACTION_TYPE_END &&
> > + action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP;
> > + action++) {
> > + }
> > + /* Handle decap action only if it isn't followed by encap */
> > + if (action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
> > + /* on egress, decap without following encap is error.
> > */
> > + if (attr->egress)
> > + return rte_flow_error_set
> > + (error, ENOTSUP,
> > +
> > RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
> > + NULL,
> > + "decap action not supported for "
> > + "egress");
>
> This check should have been performed on the validate stage.
I will move it.
>
> > + dev_flow->dv.actions[actions_n].type =
> > +
> > MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> > + dev_flow->dv.actions[actions_n].action =
> > + flow_dv_create_action_l2_decap
> > + (dev, action, error);
> > + if (!(dev_flow->dv.actions[actions_n].action))
> > + return -rte_errno;
> > + dev_flow->dv.verbs_action =
> > + dev_flow->dv.actions[actions_n].action;
> > + actions_n++;
> > + }
> > + /* If decap is followed by encap, handle it at encap case. */
> > + flow->actions |= MLX5_FLOW_ACTION_RAW_DECAP;
> > + break;
> > default:
> > break;
> > }
> > --
> > 1.8.3.1
More information about the dev
mailing list