[dpdk-dev] [PATCH v7 2/7] net/mlx5: add VXLAN encap action to Direct Verbs
Shahaf Shuler
shahafs at mellanox.com
Wed Oct 31 16:09:51 CET 2018
Wednesday, October 31, 2018 9:11 AM, Dekel Peled:
> Subject: [PATCH v7 2/7] net/mlx5: add VXLAN encap action to Direct Verbs
>
> This patch implements the VXLAN encap action in DV flow for MLX5 PMD.
>
> Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow.h | 3 +
> drivers/net/mlx5/mlx5_flow_dv.c | 347
> +++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 345 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 61299d6..286d7bb 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -92,6 +92,7 @@
> #define MLX5_FLOW_ACTION_DEC_TTL (1u << 19) #define
> MLX5_FLOW_ACTION_SET_MAC_SRC (1u << 20) #define
> MLX5_FLOW_ACTION_SET_MAC_DST (1u << 21)
> +#define MLX5_FLOW_ACTION_VXLAN_ENCAP (1u << 22)
>
> #define MLX5_FLOW_FATE_ACTIONS \
> (MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE |
> MLX5_FLOW_ACTION_RSS) @@ -181,6 +182,8 @@ struct mlx5_flow_dv {
> #ifdef HAVE_IBV_FLOW_DV_SUPPORT
> struct mlx5dv_flow_action_attr
> actions[MLX5_DV_MAX_NUMBER_OF_ACTIONS];
> /**< Action list. */
> + struct ibv_flow_action *encap_decap_verbs_action;
> + /**< Verbs encap/decap object. */
> #endif
> int actions_n; /**< number of actions. */ }; diff --git
> a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index 8f729f4..1f9a842 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -34,6 +34,8 @@
>
> #ifdef HAVE_IBV_FLOW_DV_SUPPORT
>
> +#define MLX5_ENCAP_MAX_LEN 132
> +
> /**
> * Validate META item.
> *
> @@ -96,6 +98,303 @@
> }
>
> /**
> + * Validate the L2 encap action.
> + *
> + * @param[in] action_flags
> + * Holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the encap action.
> + * @param[in] attr
> + * Pointer to flow attributes
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_l2_encap(uint64_t action_flags,
> + const struct rte_flow_action *action,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + if (!(action->conf))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> action,
> + "configuration cannot be null");
> + if (action_flags & MLX5_FLOW_ACTION_DROP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can't drop and encap in same
> flow");
> + if (action_flags & MLX5_FLOW_ACTION_VXLAN_ENCAP)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> NULL,
> + "can only have a single encap"
> + " action in a flow");
> + if (attr->ingress)
> + return rte_flow_error_set(error, ENOTSUP,
> +
> RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
> + NULL,
> + "encap action not supported for "
> + "ingress");
> + return 0;
> +}
> +
> +/**
> + * Get the size of specific rte_flow_item_type
> + *
> + * @param[in] item_type
> + * Tested rte_flow_item_type.
> + *
> + * @return
> + * sizeof struct item_type, 0 if void or irrelevant.
> + */
> +static size_t
> +flow_dv_get_item_len(const enum rte_flow_item_type item_type) {
> + size_t retval;
> +
> + switch (item_type) {
> + case RTE_FLOW_ITEM_TYPE_ETH:
> + retval = sizeof(struct rte_flow_item_eth);
> + break;
> + case RTE_FLOW_ITEM_TYPE_VLAN:
> + retval = sizeof(struct rte_flow_item_vlan);
> + break;
> + case RTE_FLOW_ITEM_TYPE_IPV4:
> + retval = sizeof(struct rte_flow_item_ipv4);
> + break;
> + case RTE_FLOW_ITEM_TYPE_IPV6:
> + retval = sizeof(struct rte_flow_item_ipv6);
> + break;
> + case RTE_FLOW_ITEM_TYPE_UDP:
> + retval = sizeof(struct rte_flow_item_udp);
> + break;
> + case RTE_FLOW_ITEM_TYPE_TCP:
> + retval = sizeof(struct rte_flow_item_tcp);
> + break;
> + case RTE_FLOW_ITEM_TYPE_VXLAN:
> + retval = sizeof(struct rte_flow_item_vxlan);
> + break;
> + case RTE_FLOW_ITEM_TYPE_GRE:
> + retval = sizeof(struct rte_flow_item_gre);
> + break;
> + case RTE_FLOW_ITEM_TYPE_NVGRE:
> + retval = sizeof(struct rte_flow_item_nvgre);
> + break;
> + case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
> + retval = sizeof(struct rte_flow_item_vxlan_gpe);
> + break;
> + case RTE_FLOW_ITEM_TYPE_MPLS:
> + retval = sizeof(struct rte_flow_item_mpls);
> + break;
> + case RTE_FLOW_ITEM_TYPE_VOID: /* Fall through. */
> + default:
> + retval = 0;
> + break;
> + }
> + return retval;
> +};
> +
> +#define MLX5_IPV4_VERSION 0x40
> +#define MLX5_IPV4_IHL_MIN 0x05
> +#define MLX5_IPV4_TTL_DEF 0x40
> +#define MLX5_IPV6_VTC_FLOW 0x60000000
> +#define MLX5_IPV6_HOP_LIMIT 0xff
> +#define MLX5_VXLAN_FLAGS 0x08000000
> +#define MLX5_VXLAN_GPE_FLAGS 0x0c000003
Better to prefix them all w/ MLX5_ENCAP_*
> +
> +/**
> + * Convert the encap action data from list of rte_flow_item to raw
> +buffer
> + *
> + * @param[in] items
> + * Pointer to rte_flow_item objects list.
> + * @param[out] buf
> + * Pointer to the output buffer.
> + * @param[out] size
> + * Pointer to the output buffer size.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_convert_encap_data(const struct rte_flow_item *item, uint8_t
Here it is also items
> *buf,
> + size_t *size, struct rte_flow_error *error) {
> + struct ether_hdr *eth = NULL;
> + struct vlan_hdr *vlan = NULL;
> + struct ipv4_hdr *ipv4 = NULL;
> + struct ipv6_hdr *ipv6 = NULL;
> + struct udp_hdr *udp = NULL;
> + struct vxlan_hdr *vxlan = NULL;
> + size_t len;
> + size_t temp_size = 0;
> +
> + if (!item)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "invalid empty data");
> + for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> + len = flow_dv_get_item_len(item->type);
> + if (len + temp_size > MLX5_ENCAP_MAX_LEN)
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "items total size is too big"
> + " for encap action");
> + rte_memcpy((void *)&buf[temp_size], item->spec, len);
> + switch (item->type) {
> + case RTE_FLOW_ITEM_TYPE_ETH:
> + eth = (struct ether_hdr *)&buf[temp_size];
> + break;
> + case RTE_FLOW_ITEM_TYPE_VLAN:
> + vlan = (struct vlan_hdr *)&buf[temp_size];
> + if (!eth)
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "eth header not found");
> + if (!eth->ether_type)
> + eth->ether_type =
> RTE_BE16(ETHER_TYPE_VLAN);
> + break;
> + case RTE_FLOW_ITEM_TYPE_IPV4:
> + ipv4 = (struct ipv4_hdr *)&buf[temp_size];
> + if (!vlan && !eth)
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "neither eth nor vlan"
> + " header found");
> + if (vlan && !vlan->eth_proto)
> + vlan->eth_proto =
> RTE_BE16(ETHER_TYPE_IPv4);
> + else if (eth && !eth->ether_type)
> + eth->ether_type =
> RTE_BE16(ETHER_TYPE_IPv4);
> + if (!ipv4->version_ihl)
> + ipv4->version_ihl = MLX5_IPV4_VERSION |
> + MLX5_IPV4_IHL_MIN;
> + if (!ipv4->time_to_live)
> + ipv4->time_to_live = MLX5_IPV4_TTL_DEF;
> + break;
> + case RTE_FLOW_ITEM_TYPE_IPV6:
> + ipv6 = (struct ipv6_hdr *)&buf[temp_size];
> + if (!vlan && !eth)
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "neither eth nor vlan"
> + " header found");
> + if (vlan && !vlan->eth_proto)
> + vlan->eth_proto =
> RTE_BE16(ETHER_TYPE_IPv6);
> + else if (eth && !eth->ether_type)
> + eth->ether_type =
> RTE_BE16(ETHER_TYPE_IPv6);
> + if (!ipv6->vtc_flow)
> + ipv6->vtc_flow =
> RTE_BE32(MLX5_IPV6_VTC_FLOW);
> + if (!ipv6->hop_limits)
> + ipv6->hop_limits = MLX5_IPV6_HOP_LIMIT;
> + break;
> + case RTE_FLOW_ITEM_TYPE_UDP:
> + udp = (struct udp_hdr *)&buf[temp_size];
> + if (!ipv4 && !ipv6)
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "ip header not found");
> + if (ipv4 && !ipv4->next_proto_id)
> + ipv4->next_proto_id = IPPROTO_UDP;
> + else if (ipv6 && !ipv6->proto)
> + ipv6->proto = IPPROTO_UDP;
This is not what I meant. I meant to check the vxlan GPE next protocol. This one must be set by the App
> + break;
> + case RTE_FLOW_ITEM_TYPE_VXLAN:
> + vxlan = (struct vxlan_hdr *)&buf[temp_size];
> + if (!udp)
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "udp header not found");
> + if (!udp->dst_port)
> + udp->dst_port =
> RTE_BE16(MLX5_UDP_PORT_VXLAN);
> + if (!vxlan->vx_flags)
> + vxlan->vx_flags =
> RTE_BE32(MLX5_VXLAN_FLAGS);
> + break;
> + case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
> + vxlan = (struct vxlan_hdr *)&buf[temp_size];
> + if (!udp)
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "udp header not found");
> + if ((ipv4 && !ipv4->next_proto_id) ||
> + (ipv6 && !ipv6->proto))
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "next protocol not found");
> + if (!udp->dst_port)
> + udp->dst_port =
> +
> RTE_BE16(MLX5_UDP_PORT_VXLAN_GPE);
> + if (!vxlan->vx_flags)
> + vxlan->vx_flags =
> +
> RTE_BE32(MLX5_VXLAN_GPE_FLAGS);
> + break;
> + case RTE_FLOW_ITEM_TYPE_VOID:
> + break;
> + default:
> + return rte_flow_error_set(error, EINVAL,
> +
> RTE_FLOW_ERROR_TYPE_ACTION,
> + (void *)item->type,
> + "unsupported item type");
> + break;
> + }
> + temp_size += len;
> + }
> + *size = temp_size;
> + return 0;
> +}
> +
> +/**
> + * Convert L2 encap action to DV specification.
> + *
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> + * @param[in] action
> + * Pointer to action structure.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * Pointer to action on success, NULL otherwise and rte_errno is set.
> + */
> +static struct ibv_flow_action *
> +flow_dv_create_action_l2_encap(struct rte_eth_dev *dev,
> + const struct rte_flow_action *action,
> + struct rte_flow_error *error) {
> + struct ibv_flow_action *verbs_action = NULL;
> + const struct rte_flow_item *encap_data;
> + struct priv *priv = dev->data->dev_private;
> + uint8_t buf[MLX5_ENCAP_MAX_LEN];
> + size_t size = 0;
> + int convert_result = 0;
> +
> + encap_data = ((const struct rte_flow_action_vxlan_encap *)
> + action->conf)->definition;
> + convert_result = flow_dv_convert_encap_data(encap_data, buf,
> + &size, error);
> + if (convert_result)
> + return NULL;
> + verbs_action = mlx5_glue-
> >dv_create_flow_action_packet_reformat
> + (priv->ctx, size, buf,
> +
> MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
> + MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
> + if (!verbs_action)
> + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> + NULL, "cannot create L2 encap action");
> + return verbs_action;
> +}
> +
> +/**
> * Verify the @p attributes will be correctly understood by the NIC and store
> * them in the @p flow if everything is correct.
> *
> @@ -339,6 +638,16 @@
> action_flags |= MLX5_FLOW_ACTION_COUNT;
> ++actions_n;
> break;
> + case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
> + ret =
> flow_dv_validate_action_l2_encap(action_flags,
> + actions, attr,
> + error);
> + if (ret < 0)
> + return ret;
> + action_flags |=
> MLX5_FLOW_ACTION_VXLAN_ENCAP;
> + ++actions_n;
> + break;
> +
> default:
> return rte_flow_error_set(error, ENOTSUP,
>
> RTE_FLOW_ERROR_TYPE_ACTION,
> @@ -1045,14 +1354,23 @@
> /**
> * Store the requested actions in an array.
> *
> + * @param[in] dev
> + * Pointer to rte_eth_dev structure.
> * @param[in] action
> * Flow action to translate.
> * @param[in, out] dev_flow
> * Pointer to the mlx5_flow.
> + * @param[out] error
> + * Pointer to the error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> */
> -static void
> -flow_dv_create_action(const struct rte_flow_action *action,
> - struct mlx5_flow *dev_flow)
> +static int
> +flow_dv_create_action(struct rte_eth_dev *dev,
> + const struct rte_flow_action *action,
> + struct mlx5_flow *dev_flow,
> + struct rte_flow_error *error)
> {
> const struct rte_flow_action_queue *queue;
> const struct rte_flow_action_rss *rss; @@ -1100,10 +1418,24 @@
> /* Added to array only in apply since we need the QP */
> flow->actions |= MLX5_FLOW_ACTION_RSS;
> break;
> + case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
> + dev_flow->dv.actions[actions_n].type =
> + MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
> + dev_flow->dv.actions[actions_n].action =
> + flow_dv_create_action_l2_encap(dev,
> action,
> + error);
> + if (!(dev_flow->dv.actions[actions_n].action))
> + return -rte_errno;
> + dev_flow->dv.encap_decap_verbs_action =
> + dev_flow->dv.actions[actions_n].action;
> + flow->actions |= MLX5_FLOW_ACTION_VXLAN_ENCAP;
> + actions_n++;
> + break;
> default:
> break;
> }
> dev_flow->dv.actions_n = actions_n;
> + return 0;
> }
>
> static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
> @@ -1217,7 +1549,6 @@
> return 0;
> }
>
> -
> /**
> * Fill the flow with DV spec.
> *
> @@ -1272,7 +1603,8 @@
> if (flow_dv_matcher_register(dev, &matcher, dev_flow, error))
> return -rte_errno;
> for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
> - flow_dv_create_action(actions, dev_flow);
> + if (flow_dv_create_action(dev, actions, dev_flow, error))
> + return -rte_errno;
> return 0;
> }
>
> @@ -1457,6 +1789,11 @@
> LIST_REMOVE(dev_flow, next);
> if (dev_flow->dv.matcher)
> flow_dv_matcher_release(dev, dev_flow);
> + if (dev_flow->dv.encap_decap_verbs_action) {
> + claim_zero(mlx5_glue->destroy_flow_action
> + (dev_flow->dv.encap_decap_verbs_action));
> + dev_flow->dv.encap_decap_verbs_action = NULL;
> + }
> rte_free(dev_flow);
> }
> }
> --
> 1.8.3.1
More information about the dev
mailing list