[dpdk-dev] [PATCH v2] net/mlx5: fix representor port xstats

[Xueming(Steven) Li]

> -----Original Message-----
> From: Yongseok Koh
> Sent: Saturday, September 15, 2018 12:51 AM
> To: Xueming(Steven) Li <xuemingl at mellanox.com>
> Cc: Shahaf Shuler <shahafs at mellanox.com>; dev at dpdk.org
> Subject: Re: [PATCH v2] net/mlx5: fix representor port xstats
> 
> 
> > On Sep 13, 2018, at 11:33 PM, Xueming Li <xuemingl at mellanox.com> wrote:
> >
> > This patch fixes the issue that representor port shows xstats of PF.
> >
> > Fixes: 5a4b8e2612c5 ("net/mlx5: probe all port representors")
> 
> Wrong commit SHA.
> 
> > Signed-off-by: Xueming Li <xuemingl at mellanox.com>
> > ---
> > drivers/net/mlx5/mlx5_stats.c | 13 +++++++++----
> > 1 file changed, 9 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/mlx5_stats.c
> > b/drivers/net/mlx5/mlx5_stats.c index 91f3d47..ed5b51b 100644
> > --- a/drivers/net/mlx5/mlx5_stats.c
> > +++ b/drivers/net/mlx5/mlx5_stats.c
> > @@ -146,7 +146,7 @@ struct mlx5_counter_ctrl {
> > 	et_stats->cmd = ETHTOOL_GSTATS;
> > 	et_stats->n_stats = xstats_ctrl->stats_n;
> > 	ifr.ifr_data = (caddr_t)et_stats;
> > -	ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr, 1);
> > +	ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr, 0);
> > 	if (ret) {
> > 		DRV_LOG(WARNING,
> > 			"port %u unable to read statistic values from device", @@ -194,7
> > +194,7 @@ struct mlx5_counter_ctrl {
> >
> > 	drvinfo.cmd = ETHTOOL_GDRVINFO;
> > 	ifr.ifr_data = (caddr_t)&drvinfo;
> > -	ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr, 1);
> > +	ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr, 0);
> > 	if (ret) {
> > 		DRV_LOG(WARNING, "port %u unable to query number of statistics",
> > 			dev->data->port_id);
> > @@ -229,7 +229,6 @@ struct mlx5_counter_ctrl {
> > 		return;
> > 	}
> > 	dev_stats_n = ret;
> > -	xstats_ctrl->stats_n = dev_stats_n;
> > 	/* Allocate memory to grab stat names and values. */
> > 	str_sz = dev_stats_n * ETH_GSTRING_LEN;
> > 	strings = (struct ethtool_gstrings *) @@ -244,7 +243,7 @@ struct
> > mlx5_counter_ctrl {
> > 	strings->string_set = ETH_SS_STATS;
> > 	strings->len = dev_stats_n;
> > 	ifr.ifr_data = (caddr_t)strings;
> > -	ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr, 1);
> > +	ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr, 0);
> > 	if (ret) {
> > 		DRV_LOG(WARNING, "port %u unable to get statistic names",
> > 			dev->data->port_id);
> > @@ -275,6 +274,7 @@ struct mlx5_counter_ctrl {
> > 			goto free;
> > 		}
> > 	}
> > +	xstats_ctrl->stats_n = dev_stats_n;
> 
> Any reason to move it?
> If it is done to group the code, I'm fine with that.

Don't set value until all code success.

> 
> Thanks,
> Yongseok
> 
> > 	/* Copy to base at first time. */
> > 	assert(xstats_n <= MLX5_MAX_XSTATS);
> > 	ret = mlx5_read_dev_counters(dev, xstats_ctrl->base); @@ -307,6
> > +307,8 @@ struct mlx5_counter_ctrl {
> > 	unsigned int i;
> > 	uint64_t counters[n];
> >
> > +	if (!priv->xstats_ctrl.stats_n)
> > +		return 0;
> > 	if (n >= xstats_n && stats) {
> > 		struct mlx5_xstats_ctrl *xstats_ctrl = &priv->xstats_ctrl;
> > 		int stats_n;
> > @@ -480,8 +482,11 @@ struct mlx5_counter_ctrl {
> > mlx5_xstats_get_names(struct rte_eth_dev *dev __rte_unused,
> > 		      struct rte_eth_xstat_name *xstats_names, unsigned int n) {
> > +	struct priv *priv = dev->data->dev_private;
> > 	unsigned int i;
> >
> > +	if (!priv->xstats_ctrl.stats_n)
> > +		return 0;
> > 	if (n >= xstats_n && xstats_names) {
> > 		for (i = 0; i != xstats_n; ++i) {
> > 			strncpy(xstats_names[i].name,
> > --
> > 1.8.3.1
> >