[dpdk-dev] [PATCH] net/ixgbe: put 5tuple check in front to jump over ntuple filter case

[mocan]

Hi Qi,

In ixgbe_flow_create function, ntuple filter is parsed first. 
If the flow is considered to be ntuple filter, it will not go on to judge ethertype filter, syn filter and fdir filter.
In the function ntuple_filter_to_5tuple, 5 tuple info is checked, but it's too late to jump over the ntuple filter if it's a fdir filter.









At 2018-09-21 23:48:37, "Zhang, Qi Z" <qi.z.zhang at intel.com> wrote:
>Hi Faicker:
>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of faicker.mo
>> Sent: Tuesday, September 18, 2018 1:49 PM
>> To: dev at dpdk.org
>> Cc: faicker.mo <faicker.mo at ucloud.cn>
>> Subject: [dpdk-dev] [PATCH] net/ixgbe: put 5tuple check in front to jump over
>> ntuple filter case
>> 
>> From: "faicker.mo" <faicker.mo at ucloud.cn>
>> 
>> Check in func ntuple_filter_to_5tuple is too late for fdir filter rule, add check
>> in func cons_parse_ntuple_filter.
>
>Would you explain more about the intention for this patch?
>Though it can be more fast to reject an invalid flow, but why it is too late in your case? 
>
>Thanks
>Qi
>
>
>> 
>> Signed-off-by: faicker.mo <faicker.mo at ucloud.cn>
>> ---
>>  drivers/net/ixgbe/ixgbe_flow.c | 29 +++++++++++++++++++++++++++++
>>  1 file changed, 29 insertions(+)
>> 
>> diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c
>> index 1adf1b8..f0fafeb 100644
>> --- a/drivers/net/ixgbe/ixgbe_flow.c
>> +++ b/drivers/net/ixgbe/ixgbe_flow.c
>> @@ -363,6 +363,17 @@ const struct rte_flow_action *next_no_void_action(
>>  				item, "Not supported by ntuple filter");
>>  			return -rte_errno;
>>  		}
>> +		if ((ipv4_mask->hdr.src_addr != 0 &&
>> +			ipv4_mask->hdr.src_addr != UINT32_MAX) ||
>> +			(ipv4_mask->hdr.dst_addr != 0 &&
>> +			ipv4_mask->hdr.dst_addr != UINT32_MAX) ||
>> +			(ipv4_mask->hdr.next_proto_id != UINT8_MAX &&
>> +			ipv4_mask->hdr.next_proto_id != 0)) {
>> +			rte_flow_error_set(error,
>> +				EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
>> +				item, "Not supported by ntuple filter");
>> +			return -rte_errno;
>> +		}
>> 
>>  		filter->dst_ip_mask = ipv4_mask->hdr.dst_addr;
>>  		filter->src_ip_mask = ipv4_mask->hdr.src_addr; @@ -432,6 +443,15
>> @@ const struct rte_flow_action *next_no_void_action(
>>  				item, "Not supported by ntuple filter");
>>  			return -rte_errno;
>>  		}
>> +		if ((tcp_mask->hdr.src_port != 0 &&
>> +			tcp_mask->hdr.src_port != UINT16_MAX) ||
>> +			(tcp_mask->hdr.dst_port != 0 &&
>> +			tcp_mask->hdr.dst_port != UINT16_MAX)) {
>> +			rte_flow_error_set(error,
>> +				EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
>> +				item, "Not supported by ntuple filter");
>> +			return -rte_errno;
>> +		}
>> 
>>  		filter->dst_port_mask  = tcp_mask->hdr.dst_port;
>>  		filter->src_port_mask  = tcp_mask->hdr.src_port; @@ -467,6
>> +487,15 @@ const struct rte_flow_action *next_no_void_action(
>>  				item, "Not supported by ntuple filter");
>>  			return -rte_errno;
>>  		}
>> +		if ((udp_mask->hdr.src_port != 0 &&
>> +			udp_mask->hdr.src_port != UINT16_MAX) ||
>> +			(udp_mask->hdr.dst_port != 0 &&
>> +			udp_mask->hdr.dst_port != UINT16_MAX)) {
>> +			rte_flow_error_set(error,
>> +				EINVAL, RTE_FLOW_ERROR_TYPE_ITEM,
>> +				item, "Not supported by ntuple filter");
>> +			return -rte_errno;
>> +		}
>> 
>>  		filter->dst_port_mask = udp_mask->hdr.dst_port;
>>  		filter->src_port_mask = udp_mask->hdr.src_port;
>> --
>> 1.8.3.1
>> 
>