[dpdk-dev] [PATCH v6 2/2] app/pdump: enhance to support multi-core capture

Vipin Varghese vipin.varghese at intel.com
Thu Apr 4 10:55:15 CEST 2019


Add option --multi, to enhance pdump application to allow capture
on unique cores for each --pdump option. If option --multi is ignored
the default capture occurs on single core for all --pdump options.

Signed-off-by: Vipin Varghese <vipin.varghese at intel.com>
---
 app/pdump/main.c           | 99 ++++++++++++++++++++++++++++++--------
 doc/guides/tools/pdump.rst |  8 ++-
 2 files changed, 85 insertions(+), 22 deletions(-)

diff --git a/app/pdump/main.c b/app/pdump/main.c
index c1db2eb8d..ae2c01b7b 100644
--- a/app/pdump/main.c
+++ b/app/pdump/main.c
@@ -28,6 +28,9 @@
 #include <rte_pdump.h>
 
 #define CMD_LINE_OPT_PDUMP "pdump"
+#define CMD_LINE_OPT_PDUMP_NUM 256
+#define CMD_LINE_OPT_MULTI "multi"
+#define CMD_LINE_OPT_MULTI_NUM 257
 #define PDUMP_PORT_ARG "port"
 #define PDUMP_PCI_ARG "device_id"
 #define PDUMP_QUEUE_ARG "queue"
@@ -139,12 +142,15 @@ struct parse_val {
 static int num_tuples;
 static struct rte_eth_conf port_conf_default;
 static volatile uint8_t quit_signal;
+static uint8_t multiple_core_capture;
 
 /**< display usage */
 static void
 pdump_usage(const char *prgname)
 {
-	printf("usage: %s [EAL options] -- --pdump "
+	printf("usage: %s [EAL options]"
+			" --["CMD_LINE_OPT_MULTI"]\n"
+			" --"CMD_LINE_OPT_PDUMP" "
 			"'(port=<port id> | device_id=<pci id or vdev name>),"
 			"(queue=<queue_id>),"
 			"(rx-dev=<iface or pcap file> |"
@@ -375,7 +381,8 @@ launch_args_parse(int argc, char **argv, char *prgname)
 	int opt, ret;
 	int option_index;
 	static struct option long_option[] = {
-		{"pdump", 1, 0, 0},
+		{CMD_LINE_OPT_PDUMP, 1, 0, CMD_LINE_OPT_PDUMP_NUM},
+		{CMD_LINE_OPT_MULTI, 0, 0, CMD_LINE_OPT_MULTI_NUM},
 		{NULL, 0, 0, 0}
 	};
 
@@ -386,17 +393,16 @@ launch_args_parse(int argc, char **argv, char *prgname)
 	while ((opt = getopt_long(argc, argv, " ",
 			long_option, &option_index)) != EOF) {
 		switch (opt) {
-		case 0:
-			if (!strncmp(long_option[option_index].name,
-					CMD_LINE_OPT_PDUMP,
-					sizeof(CMD_LINE_OPT_PDUMP))) {
-				ret = parse_pdump(optarg);
-				if (ret) {
-					pdump_usage(prgname);
-					return -1;
-				}
+		case CMD_LINE_OPT_PDUMP_NUM:
+			ret = parse_pdump(optarg);
+			if (ret) {
+				pdump_usage(prgname);
+				return -1;
 			}
 			break;
+		case CMD_LINE_OPT_MULTI_NUM:
+			multiple_core_capture = 1;
+			break;
 		default:
 			pdump_usage(prgname);
 			return -1;
@@ -834,23 +840,74 @@ enable_pdump(void)
 	}
 }
 
+static inline void
+pdump_packets(struct pdump_tuples *pt)
+{
+	if (pt->dir & RTE_PDUMP_FLAG_RX)
+		pdump_rxtx(pt->rx_ring, pt->rx_vdev_id, &pt->stats);
+	if (pt->dir & RTE_PDUMP_FLAG_TX)
+		pdump_rxtx(pt->tx_ring, pt->tx_vdev_id, &pt->stats);
+}
+
+static int
+dump_packets_core(void *arg)
+{
+	struct pdump_tuples *pt = (struct pdump_tuples *) arg;
+
+	printf(" core (%u); port %u device (%s) queue %u\n",
+			rte_lcore_id(), pt->port, pt->device_id, pt->queue);
+	fflush(stdout);
+
+	while (!quit_signal)
+		pdump_packets(pt);
+
+	return 0;
+}
+
 static inline void
 dump_packets(void)
 {
 	int i;
-	struct pdump_tuples *pt;
+	uint32_t lcore_id = 0;
+
+	if (!multiple_core_capture) {
+		printf(" core (%u), capture for (%d) tuples\n",
+				rte_lcore_id(), num_tuples);
+
+		for (i = 0; i < num_tuples; i++)
+			printf(" - port %u device (%s) queue %u\n",
+				pdump_t[i].port,
+				pdump_t[i].device_id,
+				pdump_t[i].queue);
 
-	while (!quit_signal) {
-		for (i = 0; i < num_tuples; i++) {
-			pt = &pdump_t[i];
-			if (pt->dir & RTE_PDUMP_FLAG_RX)
-				pdump_rxtx(pt->rx_ring, pt->rx_vdev_id,
-					&pt->stats);
-			if (pt->dir & RTE_PDUMP_FLAG_TX)
-				pdump_rxtx(pt->tx_ring, pt->tx_vdev_id,
-					&pt->stats);
+		while (!quit_signal) {
+			for (i = 0; i < num_tuples; i++)
+				pdump_packets(&pdump_t[i]);
 		}
+
+		return;
+	}
+
+	/* check if there enough core */
+	if ((uint32_t)num_tuples >= rte_lcore_count()) {
+		printf("Insufficient cores to run parallel!\n");
+		return;
 	}
+
+	lcore_id = rte_get_next_lcore(lcore_id, 1, 0);
+
+	for (i = 0; i < num_tuples; i++) {
+		rte_eal_remote_launch(dump_packets_core,
+				&pdump_t[i], lcore_id);
+		lcore_id = rte_get_next_lcore(lcore_id, 1, 0);
+
+		if (rte_eal_wait_lcore(lcore_id) < 0)
+			rte_exit(EXIT_FAILURE, "failed to wait\n");
+	}
+
+	/* master core */
+	while (!quit_signal)
+		;
 }
 
 int
diff --git a/doc/guides/tools/pdump.rst b/doc/guides/tools/pdump.rst
index 7c2b73e72..53cd2b464 100644
--- a/doc/guides/tools/pdump.rst
+++ b/doc/guides/tools/pdump.rst
@@ -35,6 +35,7 @@ The tool has a number of command line options:
 .. code-block:: console
 
    ./build/app/dpdk-pdump --
+                          [--multi]
                           --pdump '(port=<port id> | device_id=<pci id or vdev name>),
                                    (queue=<queue_id>),
                                    (rx-dev=<iface or pcap file> |
@@ -43,6 +44,10 @@ The tool has a number of command line options:
                                    [mbuf-size=<mbuf data size>],
                                    [total-num-mbufs=<number of mbufs>]'
 
+The ``--multi`` command line option is optional argument. If passed, capture
+will be running on unique cores for all ``--pdump`` options. If ignored,
+capture will be running on single core for all ``--pdump`` options.
+
 The ``--pdump`` command line option is mandatory and it takes various sub arguments which are described in
 below section.
 
@@ -112,4 +117,5 @@ Example
 
 .. code-block:: console
 
-   $ sudo ./build/app/dpdk-pdump -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap'
+   $ sudo ./build/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap'
+   $ sudo ./build/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap'
-- 
2.17.1



More information about the dev mailing list