[dpdk-dev] [Bug 239] ipsec-secgw fails to initialize when librte_ipsec is enabled

[bugzilla at dpdk.org]

https://bugs.dpdk.org/show_bug.cgi?id=239

            Bug ID: 239
           Summary: ipsec-secgw fails to initialize when librte_ipsec is
                    enabled
           Product: DPDK
           Version: unspecified
          Hardware: ARM
                OS: Linux
            Status: CONFIRMED
          Severity: normal
          Priority: Normal
         Component: examples
          Assignee: dev at dpdk.org
          Reporter: lbartosik at marvell.com
  Target Milestone: ---

Created attachment 33
  --> https://bugs.dpdk.org/attachment.cgi?id=33&action=edit
ipsec_secgw_failure_log.txt

repo http://dpdk.org/git/next/dpdk-next-crypto
branch master
commit 3331ddc doc: update ipsec lib for supported algos

Ipsec-secgw example fails to initialize when librte_ipsec is enabled and when
default configuration of ep0.cfg is used.

It complains that two SP rules use the same SPI

./ipsec-secgw --log-level=8 -c 0xff -- -P -p 0x3 -u 0x1 --config
"(1,0,0),(0,0,0)" -f ../ep0.cfg -l

IPSEC: get_spi_proto: SPI 110 used simultaeously by IPv4(2) and IPv6 (2) SP
rules
EAL: Error - exiting with code: 1
  Cause: failed to init inbound SAs

Ipsec-secgw initializes successfully when used without librte_ipsec.
Full log is attached.

-- 
You are receiving this mail because:
You are the assignee for the bug.