[dpdk-dev] [PATCH v5 00/14] Add patch set for IPN3KE

[Xu, Rosen]

Hi,

> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Friday, April 05, 2019 2:38
> To: Xu, Rosen <rosen.xu at intel.com>; dev at dpdk.org
> Cc: Zhang, Tianfei <tianfei.zhang at intel.com>; Wei, Dan
> <dan.wei at intel.com>; Pei, Andy <andy.pei at intel.com>; Yang, Qiming
> <qiming.yang at intel.com>; Wang, Haiyue <haiyue.wang at intel.com>; Chen,
> Santos <santos.chen at intel.com>; Zhang, Zhang <zhang.zhang at intel.com>;
> Lomartire, David <david.lomartire at intel.com>
> Subject: Re: [PATCH v5 00/14] Add patch set for IPN3KE
> 
> On 4/3/2019 12:47 PM, Rosen Xu wrote:
> > v5 updates:
> > ==========
> >  - Fix EXPERIMENTAL symbol definition issue
> >
> > v4 updates:
> > ==========
> >  - Fix coding style issues
> >
> > v3 updates:
> > ==========
> >  - Fix v2 comments
> >  - Update MAC BAR of AFU index get ops
> >  - Remove OPAE share code dependency of libfdt
> >
> > v2 updates:
> > ==========
> >  - Fix v1 comments
> >  - Add support for 10G Base Line Design Bitstream
> >  - Add support for 25G Base Line Design Bitstream
> >
> > This patch set adds the support of a new net PMD, Intel® FPGA
> > Programmable Acceleration Card N3000, also called ipn3ke.
> >
> > The ipn3ke PMD (librte_pmd_ipn3ke) provides poll mode driver support
> > for Intel® FPGA PAC(Programmable Acceleration Card) N3000 based on the
> > Intel Ethernet Controller X710/XXV710 and Intel Arria 10 FPGA.
> >
> > In this card, FPGA is an acceleration bridge between network interface
> > and the Intel Ethernet Controller. Although both FPGA and Ethernet
> > Controllers are connected to CPU with PCIe Gen3x16 Switch, all the
> > packet RX/TX is handled by Intel Ethernet Controller. So from
> > application point of view the data path is still the legacy Intel
> > Ethernet Controller
> > X710/XXV710 PMD. Besides this, users can enable more acceleration
> > features by FPGA IP.
> >
> > Rosen Xu (7):
> >   drivers/bus/ifpga: add AFU shared data
> >   drivers/bus/ifpga: add function for AFU search by name
> >   drivers/net/ipn3ke: add IPN3KE ethdev PMD driver
> >   drivers/net/ipn3ke: add IPN3KE representor of PMD driver
> >   drivers/net/ipn3ke: add IPN3KE TM of PMD driver
> >   drivers/net/ipn3ke: add IPN3KE Flow of PMD driver
> >   drivers/raw/ifpga_rawdev: add IPN3KE support for IFPGA Rawdev
> >
> > Zhang, Tianfei (7):
> >   raw/ifpga/base: clean up code for ifpga share code
> >   raw/ifpga/base: store private features in FME and Port list
> >   raw/ifpga/base: add SPI and MAX10 device driver
> >   raw/ifpga/base: add I2C and at24 EEPROM driver
> >   raw/ifpga/base: add eth group driver
> >   raw/ifpga/base: add version description on README
> >   raw/ifpga/base: using prefix name "ifpga_" for feature and feature_ops
> >     data struct
> 
> There are still build errors with shared build [1] related to missing pthread
> library [2], can you please check it?
> 
IPN3KE Makefile misses include lib pthread.
LDLIBS += -lpthread
Fixed in v6.

> 
> Also there are set of errors from 'check-git-log.sh', can you please run
> following and fix the reported errors:
> ./devtools/check-git-log.sh -14

Fixed in v6.

> 
> Thanks,
> ferruh

Welcome, thanks your reminder.

> 
> [1]
> CONFIG_RTE_BUILD_SHARED_LIB=y

Check before send v6.

> [2]
> /usr/bin/ld: ipn3ke_representor.o: in function `ipn3ke_rpst_init':
> ipn3ke_representor.c:(.text+0xd13): undefined reference to
> `pthread_create'
> /usr/bin/ld: ipn3ke_representor.c:(.text+0xd32): undefined reference to
> `pthread_cancel'
> /usr/bin/ld: ipn3ke_representor.c:(.text+0xd4d): undefined reference to
> `pthread_join'
> /usr/bin/ld: ipn3ke_representor.o: in function `ipn3ke_rpst_uninit':
> ipn3ke_representor.c:(.text+0xe13): undefined reference to
> `pthread_create'
> /usr/bin/ld: ipn3ke_representor.c:(.text+0xe32): undefined reference to
> `pthread_cancel'
> /usr/bin/ld: ipn3ke_representor.c:(.text+0xe4d): undefined reference to
> `pthread_join'
> collect2: error: ld returned 1 exit status
> 

Fixed in v6.