[dpdk-dev] [PATCH] crypto/qat: fix second seg fault in QAT PMD

[Iremonger, Bernard]

Hi Fiona,

> -----Original Message-----
> From: Trahe, Fiona
> Sent: Monday, April 8, 2019 5:44 PM
> To: Iremonger, Bernard <bernard.iremonger at intel.com>; dev at dpdk.org;
> Ananyev, Konstantin <konstantin.ananyev at intel.com>; akhil.goyal at nxp.com
> Cc: Trahe, Fiona <fiona.trahe at intel.com>
> Subject: RE: [PATCH] crypto/qat: fix second seg fault in QAT PMD
> 
> Hi Bernard,
> 
> > -----Original Message-----
> > From: Iremonger, Bernard
> > Sent: Monday, April 8, 2019 1:26 PM
> > To: dev at dpdk.org; Trahe, Fiona <fiona.trahe at intel.com>; Ananyev,
> > Konstantin <konstantin.ananyev at intel.com>; akhil.goyal at nxp.com
> > Cc: Iremonger, Bernard <bernard.iremonger at intel.com>
> > Subject: [PATCH] crypto/qat: fix second seg fault in QAT PMD
> >
> > While running the IPsec unit tests the following segmentation fault is
> > occurring:
> >
> > Thread 1 "test" received signal SIGSEGV, Segmentation fault.
> > 0x0000000000bf3b50 in qat_sym_process_response (
> > op=0x5355280 <unittest_params+512>, resp=0x100455100 "") at
> > /root/dpdk/drivers/crypto/qat/qat_sym.h:161
> > 161	if (sess->bpi_ctx)
> >
> > Fixes: 91614c73b67c ("crypto/qat: make response process function
> > inline")
> > Signed-off-by: Bernard Iremonger <bernard.iremonger at intel.com>
> > ---
> >  drivers/crypto/qat/qat_sym.h | 8 +++++---
> >  1 file changed, 5 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/crypto/qat/qat_sym.h
> > b/drivers/crypto/qat/qat_sym.h index bc6426c..685c6c0 100644
> > --- a/drivers/crypto/qat/qat_sym.h
> > +++ b/drivers/crypto/qat/qat_sym.h
> > @@ -157,10 +157,12 @@ qat_sym_process_response(void **op, uint8_t
> *resp)
> >  						rx_op->sym->session,
> >  						cryptodev_qat_driver_id);
> >
> > -
> > -		if (sess->bpi_ctx)
> > +		if (sess == NULL)
> > +			rx_op->status =
> RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
> > +		else if (sess->bpi_ctx) {
> >  			qat_bpicipher_postprocess(sess, rx_op);
> > -		rx_op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
> > +			rx_op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
> > +		}
> >  	}
> >  	*op = (void *)rx_op;
> >  }
> > --
> > 2.7.4
> [Fiona] As for previous seg-fault- this is on data-path and likely due to the
> application sending in an invalid session - or a session created for a symmetric
> PMD, but being sent to a QAT asymmetric PMD - whose driver_id would not
> appear in the session array.
> Can you make sure to check for SYMMETRIC support in capabilities.
> 
I have the asym PMD disabled in the common/config_base  file.
I will investigate further.

Regards,

Bernard.