[dpdk-dev] [PATCH v6 3/4] app/testpmd: move pkt prepare logic into a separate function

Yao, Lei A lei.a.yao at intel.com
Tue Apr 9 14:24:01 CEST 2019



> -----Original Message-----
> From: Pavan Nikhilesh Bhagavatula [mailto:pbhagavatula at marvell.com]
> Sent: Tuesday, April 9, 2019 5:33 PM
> To: Lin, Xueqin <xueqin.lin at intel.com>; Yigit, Ferruh <ferruh.yigit at intel.com>
> Cc: dev at dpdk.org; Xu, Qian Q <qian.q.xu at intel.com>; Li, WenjieX A
> <wenjiex.a.li at intel.com>; Wang, FengqinX <fengqinx.wang at intel.com>;
> Yao, Lei A <lei.a.yao at intel.com>; Wang, Yinan <yinan.wang at intel.com>;
> Jerin Jacob Kollanukkaran <jerinj at marvell.com>; thomas at monjalon.net;
> arybchenko at solarflare.com; Iremonger, Bernard
> <bernard.iremonger at intel.com>; alialnu at mellanox.com; Zhang, Qi Z
> <qi.z.zhang at intel.com>
> Subject: RE: [dpdk-dev] [PATCH v6 3/4] app/testpmd: move pkt prepare logic
> into a separate function
> 
> Hi Lin,
> 
> Can you check if the following patch fixes the issue?
> http://patches.dpdk.org/patch/52395/
> 
> I wasn't able to catch this earlier.
> 
> Regards,
> Pavan

Hi, Pavan

With this patch, testpmd can generate packets with correct src
mac address at my side now. Thanks

BRs
Lei


> 
> >-----Original Message-----
> >From: Lin, Xueqin <xueqin.lin at intel.com>
> >Sent: Tuesday, April 9, 2019 2:58 PM
> >To: Pavan Nikhilesh Bhagavatula <pbhagavatula at marvell.com>; Yigit,
> Ferruh
> ><ferruh.yigit at intel.com>
> >Cc: dev at dpdk.org; Xu, Qian Q <qian.q.xu at intel.com>; Li, WenjieX A
> ><wenjiex.a.li at intel.com>; Wang, FengqinX <fengqinx.wang at intel.com>;
> Yao,
> >Lei A <lei.a.yao at intel.com>; Wang, Yinan <yinan.wang at intel.com>; Jerin
> Jacob
> >Kollanukkaran <jerinj at marvell.com>; thomas at monjalon.net;
> >arybchenko at solarflare.com; Iremonger, Bernard
> ><bernard.iremonger at intel.com>; alialnu at mellanox.com; Zhang, Qi Z
> ><qi.z.zhang at intel.com>
> >Subject: [EXT] RE: [dpdk-dev] [PATCH v6 3/4] app/testpmd: move pkt
> prepare
> >logic into a separate function
> >
> >External Email
> >
> >----------------------------------------------------------------------
> >Hi NIkhilesh,
> >
> >This patchset impacts some of 19.05 rc1 txonly/burst tests on Intel NIC. If
> set
> >txonly fwd, IXIA or tester peer can't receive packets that sent from app
> >generated.
> >This is high issue, block some cases test. Detailed information as below,
> need
> >you to check it soon.
> >
> >*DPDK version:  19.05.0-rc1
> >*NIC hardware: Fortville_eagle/Fortville_spirit/Niantic
> >Environment: one NIC port connect with another NIC port, or one NIC port
> >connect with IXIA
> >
> >Test Setup
> >1. Bind port to igb_uio or vfio
> >2. On DUT, setup testpmd:
> >    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1e -n 4  -- -i --rxq=4 --
> txq=4 --
> >port-topology=loop 3. Set txonly forward, start testpmd
> >testpmd>set fwd txonly
> >testpmd>start
> >4. Dump packets from tester NIC port or IXIA, find no packets were
> received on
> >the PORT0.
> >tcpdump -i <tester_interface> -v
> >
> >Best regards,
> >Xueqin
> >
> >> -----Original Message-----
> >> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Pavan Nikhilesh
> >> Bhagavatula
> >> Sent: Tuesday, April 2, 2019 5:54 PM
> >> To: Jerin Jacob Kollanukkaran <jerinj at marvell.com>;
> >> thomas at monjalon.net; arybchenko at solarflare.com; Yigit, Ferruh
> >> <ferruh.yigit at intel.com>; Iremonger, Bernard
> >> <bernard.iremonger at intel.com>; alialnu at mellanox.com
> >> Cc: dev at dpdk.org; Pavan Nikhilesh Bhagavatula
> >> <pbhagavatula at marvell.com>
> >> Subject: [dpdk-dev] [PATCH v6 3/4] app/testpmd: move pkt prepare logic
> >> into a separate function
> >>
> >> From: Pavan Nikhilesh <pbhagavatula at marvell.com>
> >>
> >> Move the packet prepare logic into a separate function so that it can
> >> be reused later.
> >>
> >> Signed-off-by: Pavan Nikhilesh <pbhagavatula at marvell.com>
> >> ---
> >>  app/test-pmd/txonly.c | 163
> >> +++++++++++++++++++++---------------------
> >>  1 file changed, 83 insertions(+), 80 deletions(-)
> >>
> >> diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c index
> >> 65171c1d1..56ca0ad24 100644
> >> --- a/app/test-pmd/txonly.c
> >> +++ b/app/test-pmd/txonly.c
> >> @@ -148,6 +148,80 @@ setup_pkt_udp_ip_headers(struct ipv4_hdr
> *ip_hdr,
> >>  	ip_hdr->hdr_checksum = (uint16_t) ip_cksum;  }
> >>
> >> +static inline bool
> >> +pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp,
> >> +		struct ether_hdr *eth_hdr, const uint16_t vlan_tci,
> >> +		const uint16_t vlan_tci_outer, const uint64_t ol_flags) {
> >> +	struct rte_mbuf *pkt_segs[RTE_MAX_SEGS_PER_PKT];
> >> +	uint8_t  ip_var = RTE_PER_LCORE(_ip_var);
> >> +	struct rte_mbuf *pkt_seg;
> >> +	uint32_t nb_segs, pkt_len;
> >> +	uint8_t i;
> >> +
> >> +	if (unlikely(tx_pkt_split == TX_PKT_SPLIT_RND))
> >> +		nb_segs = random() % tx_pkt_nb_segs + 1;
> >> +	else
> >> +		nb_segs = tx_pkt_nb_segs;
> >> +
> >> +	if (nb_segs > 1) {
> >> +		if (rte_mempool_get_bulk(mbp, (void **)pkt_segs,
> nb_segs))
> >> +			return false;
> >> +	}
> >> +
> >> +	rte_pktmbuf_reset_headroom(pkt);
> >> +	pkt->data_len = tx_pkt_seg_lengths[0];
> >> +	pkt->ol_flags = ol_flags;
> >> +	pkt->vlan_tci = vlan_tci;
> >> +	pkt->vlan_tci_outer = vlan_tci_outer;
> >> +	pkt->l2_len = sizeof(struct ether_hdr);
> >> +	pkt->l3_len = sizeof(struct ipv4_hdr);
> >> +
> >> +	pkt_len = pkt->data_len;
> >> +	pkt_seg = pkt;
> >> +	for (i = 1; i < nb_segs; i++) {
> >> +		pkt_seg->next = pkt_segs[i - 1];
> >> +		pkt_seg = pkt_seg->next;
> >> +		pkt_seg->data_len = tx_pkt_seg_lengths[i];
> >> +		pkt_len += pkt_seg->data_len;
> >> +	}
> >> +	pkt_seg->next = NULL; /* Last segment of packet. */
> >> +	/*
> >> +	 * Copy headers in first packet segment(s).
> >> +	 */
> >> +	copy_buf_to_pkt(eth_hdr, sizeof(eth_hdr), pkt, 0);
> >> +	copy_buf_to_pkt(&pkt_ip_hdr, sizeof(pkt_ip_hdr), pkt,
> >> +			sizeof(struct ether_hdr));
> >> +	if (txonly_multi_flow) {
> >> +		struct ipv4_hdr *ip_hdr;
> >> +		uint32_t addr;
> >> +
> >> +		ip_hdr = rte_pktmbuf_mtod_offset(pkt,
> >> +				struct ipv4_hdr *,
> >> +				sizeof(struct ether_hdr));
> >> +		/*
> >> +		 * Generate multiple flows by varying IP src addr. This
> >> +		 * enables packets are well distributed by RSS in
> >> +		 * receiver side if any and txonly mode can be a decent
> >> +		 * packet generator for developer's quick performance
> >> +		 * regression test.
> >> +		 */
> >> +		addr = (IP_DST_ADDR | (ip_var++ << 8)) + rte_lcore_id();
> >> +		ip_hdr->src_addr = rte_cpu_to_be_32(addr);
> >> +	}
> >> +	copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt,
> >> +			sizeof(struct ether_hdr) +
> >> +			sizeof(struct ipv4_hdr));
> >> +	/*
> >> +	 * Complete first mbuf of packet and append it to the
> >> +	 * burst of packets to be transmitted.
> >> +	 */
> >> +	pkt->nb_segs = nb_segs;
> >> +	pkt->pkt_len = pkt_len;
> >> +
> >> +	return true;
> >> +}
> >> +
> >>  /*
> >>   * Transmit a burst of multi-segments packets.
> >>   */
> >> @@ -155,10 +229,8 @@ static void
> >>  pkt_burst_transmit(struct fwd_stream *fs)  {
> >>  	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
> >> -	struct rte_mbuf *pkt_segs[RTE_MAX_SEGS_PER_PKT];
> >>  	struct rte_port *txp;
> >>  	struct rte_mbuf *pkt;
> >> -	struct rte_mbuf *pkt_seg;
> >>  	struct rte_mempool *mbp;
> >>  	struct ether_hdr eth_hdr;
> >>  	uint16_t nb_tx;
> >> @@ -166,15 +238,12 @@ pkt_burst_transmit(struct fwd_stream *fs)
> >>  	uint16_t vlan_tci, vlan_tci_outer;
> >>  	uint32_t retry;
> >>  	uint64_t ol_flags = 0;
> >> -	uint8_t  ip_var = RTE_PER_LCORE(_ip_var);
> >> -	uint8_t  i;
> >>  	uint64_t tx_offloads;
> >>  #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
> >>  	uint64_t start_tsc;
> >>  	uint64_t end_tsc;
> >>  	uint64_t core_cycles;
> >>  #endif
> >> -	uint32_t nb_segs, pkt_len;
> >>
> >>  #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
> >>  	start_tsc = rte_rdtsc();
> >> @@ -201,85 +270,19 @@ pkt_burst_transmit(struct fwd_stream *fs)
> >>
> >>  	for (nb_pkt = 0; nb_pkt < nb_pkt_per_burst; nb_pkt++) {
> >>  		pkt = rte_mbuf_raw_alloc(mbp);
> >> -		if (pkt == NULL) {
> >> -		nomore_mbuf:
> >> -			if (nb_pkt == 0)
> >> -				return;
> >> +		if (pkt == NULL)
> >> +			break;
> >> +		if (unlikely(!pkt_burst_prepare(pkt, mbp, &eth_hdr, vlan_tci,
> >> +						vlan_tci_outer, ol_flags))) {
> >> +			rte_pktmbuf_free(pkt);
> >>  			break;
> >>  		}
> >> -
> >> -		/*
> >> -		 * Using raw alloc is good to improve performance,
> >> -		 * but some consumers may use the headroom and so
> >> -		 * decrement data_off. We need to make sure it is
> >> -		 * reset to default value.
> >> -		 */
> >> -		rte_pktmbuf_reset_headroom(pkt);
> >> -		pkt->data_len = tx_pkt_seg_lengths[0];
> >> -		pkt_seg = pkt;
> >> -
> >> -		if (tx_pkt_split == TX_PKT_SPLIT_RND)
> >> -			nb_segs = random() % tx_pkt_nb_segs + 1;
> >> -		else
> >> -			nb_segs = tx_pkt_nb_segs;
> >> -
> >> -		if (nb_segs > 1) {
> >> -			if (rte_mempool_get_bulk(mbp, (void **)pkt_segs,
> >> -							nb_segs)) {
> >> -				rte_pktmbuf_free(pkt);
> >> -				goto nomore_mbuf;
> >> -			}
> >> -		}
> >> -
> >> -		pkt_len = pkt->data_len;
> >> -		for (i = 1; i < nb_segs; i++) {
> >> -			pkt_seg->next = pkt_segs[i - 1];
> >> -			pkt_seg = pkt_seg->next;
> >> -			pkt_seg->data_len = tx_pkt_seg_lengths[i];
> >> -			pkt_len += pkt_seg->data_len;
> >> -		}
> >> -		pkt_seg->next = NULL; /* Last segment of packet. */
> >> -
> >> -		/*
> >> -		 * Copy headers in first packet segment(s).
> >> -		 */
> >> -		copy_buf_to_pkt(&eth_hdr, sizeof(eth_hdr), pkt, 0);
> >> -		copy_buf_to_pkt(&pkt_ip_hdr, sizeof(pkt_ip_hdr), pkt,
> >> -				sizeof(struct ether_hdr));
> >> -		if (txonly_multi_flow) {
> >> -			struct ipv4_hdr *ip_hdr;
> >> -			uint32_t addr;
> >> -
> >> -			ip_hdr = rte_pktmbuf_mtod_offset(pkt,
> >> -					struct ipv4_hdr *,
> >> -					sizeof(struct ether_hdr));
> >> -			/*
> >> -			 * Generate multiple flows by varying IP src addr. This
> >> -			 * enables packets are well distributed by RSS in
> >> -			 * receiver side if any and txonly mode can be a
> >> decent
> >> -			 * packet generator for developer's quick
> >> performance
> >> -			 * regression test.
> >> -			 */
> >> -			addr = (IP_DST_ADDR | (ip_var++ << 8)) +
> >> rte_lcore_id();
> >> -			ip_hdr->src_addr = rte_cpu_to_be_32(addr);
> >> -		}
> >> -		copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt,
> >> -				sizeof(struct ether_hdr) +
> >> -				sizeof(struct ipv4_hdr));
> >> -
> >> -		/*
> >> -		 * Complete first mbuf of packet and append it to the
> >> -		 * burst of packets to be transmitted.
> >> -		 */
> >> -		pkt->nb_segs = nb_segs;
> >> -		pkt->pkt_len = pkt_len;
> >> -		pkt->ol_flags = ol_flags;
> >> -		pkt->vlan_tci = vlan_tci;
> >> -		pkt->vlan_tci_outer = vlan_tci_outer;
> >> -		pkt->l2_len = sizeof(struct ether_hdr);
> >> -		pkt->l3_len = sizeof(struct ipv4_hdr);
> >>  		pkts_burst[nb_pkt] = pkt;
> >>  	}
> >> +
> >> +	if (nb_pkt == 0)
> >> +		return;
> >> +
> >>  	nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue, pkts_burst,
> >> nb_pkt);
> >>  	/*
> >>  	 * Retry if necessary
> >> --
> >> 2.21.0



More information about the dev mailing list