[dpdk-dev] [PATCH 3/9] net/mlx5: add Direct Rules configuration support
Ori Kam
orika at mellanox.com
Wed Apr 17 08:19:05 CEST 2019
Hi Koh,
PSB
> -----Original Message-----
> From: Yongseok Koh
> Sent: Wednesday, April 17, 2019 4:42 AM
> To: Ori Kam <orika at mellanox.com>
> Cc: Shahaf Shuler <shahafs at mellanox.com>; Matan Azrad
> <matan at mellanox.com>; Slava Ovsiienko <viacheslavo at mellanox.com>; Moti
> Haimovsky <motih at mellanox.com>; dev at dpdk.org
> Subject: Re: [PATCH 3/9] net/mlx5: add Direct Rules configuration support
>
> On Sun, Apr 14, 2019 at 09:12:31PM +0000, Ori Kam wrote:
> > This commit provides the basic configuration needed in order to
> > support Direct Rules eswitch.
>
> What do you mean my "Direct Rules eswitch"? What is the official name of it?
> E-Switch is in HCA and DR is use by library? Then, shouldn't it be "E-Switch
> with Direct Rules"? Please correct it appropriately.
>
Will fix.
> And I can see many of 'eswitch' in commit log or comment in the code. Please
> correct all of them as well.
>
> > Signed-off-by: Ori Kam <orika at mellanox.com>
> > ---
>
> The title is "net/mlx5: add Direct Rules configuration support"
> Shouldn't it have the word, "E-Switch"?
>
> And it seems to have more than "configuration"?
>
> > drivers/net/mlx5/Makefile | 5 +
> > drivers/net/mlx5/meson.build | 2 +
> > drivers/net/mlx5/mlx5.c | 52 +++++-
> > drivers/net/mlx5/mlx5.h | 12 ++
> > drivers/net/mlx5/mlx5_devx_cmds.c | 42 +++++
> > drivers/net/mlx5/mlx5_flow.c | 2 +-
> > drivers/net/mlx5/mlx5_prm.h | 328
> ++++++++++++++++++++++++++++++++++++++
> > 7 files changed, 437 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/mlx5/Makefile b/drivers/net/mlx5/Makefile
> > index 93bc869..2b72a33 100644
> > --- a/drivers/net/mlx5/Makefile
> > +++ b/drivers/net/mlx5/Makefile
> > @@ -161,6 +161,11 @@ mlx5_autoconf.h.new: $(RTE_SDK)/buildtools/auto-
> config-h.sh
> > enum MLX5DV_DR_NS_TYPE_TERMINATING \
> > $(AUTOCONF_OUTPUT)
> > $Q sh -- '$<' '$@' \
> > + HAVE_MLX5DV_DR_ESWITCH \
> > + infiniband/mlx5dv.h \
> > + enum MLX5DV_DR_NS_DOMAIN_FDB_BYPASS \
> > + $(AUTOCONF_OUTPUT)
> > + $Q sh -- '$<' '$@' \
>
> Should start from HAVE_IBV_FLOW_
> How about HAVE_IBV_FLOW_DV_ESW_DIRECT_RULES?
>
Like stated in previous patch. The Nic DR define is of this format.
> > HAVE_IBV_DEVX_OBJ \
> > infiniband/mlx5dv.h \
> > func mlx5dv_devx_obj_create \
> > diff --git a/drivers/net/mlx5/meson.build b/drivers/net/mlx5/meson.build
> > index 0037e15..9dfd28d 100644
> > --- a/drivers/net/mlx5/meson.build
> > +++ b/drivers/net/mlx5/meson.build
> > @@ -113,6 +113,8 @@ if build
> > 'MLX5DV_FLOW_ACTION_COUNTERS_DEVX' ],
> > [ 'HAVE_MLX5DV_DR', 'infiniband/mlx5dv.h',
> > 'MLX5DV_DR_NS_TYPE_TERMINATING' ],
> > + [ 'HAVE_MLX5DV_DR_ESWITCH', 'infiniband/mlx5dv.h',
> > + 'MLX5DV_DR_NS_DOMAIN_FDB_BYPASS' ],
>
> Same here.
Same comment as before.
>
> > [ 'HAVE_SUPPORTED_40000baseKR4_Full', 'linux/ethtool.h',
> > 'SUPPORTED_40000baseKR4_Full' ],
> > [ 'HAVE_SUPPORTED_40000baseCR4_Full', 'linux/ethtool.h',
> > diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> > index 9ff50df..938ba1c 100644
> > --- a/drivers/net/mlx5/mlx5.c
> > +++ b/drivers/net/mlx5/mlx5.c
> > @@ -101,6 +101,9 @@
> > /* Allow L3 VXLAN flow creation. */
> > #define MLX5_L3_VXLAN_EN "l3_vxlan_en"
> >
> > +/* Activate DV eswitch flow steering. */
> > +#define MLX5_DV_ESWITCH_EN "dv_eswitch_en"
> > +
>
> We can set a rule to use 'esw'/'ESW' in the code just like dv/tcf/verbs and so
> on?
> Or, what's the difference between E-Switch and FDB?
I'm not sure I understand your comment.
E-Switch rules are located in the device FDB,
We can ether create E-Switch rules using tcf or using DR which are part of dv steering.
This parameters is used to select if the E-Switch rules engine will be the tcf or dv.
>
> > /* Activate DV flow steering. */
> > #define MLX5_DV_FLOW_EN "dv_flow_en"
> >
> > @@ -344,6 +347,18 @@ struct mlx5_dev_spawn_data {
> > }
> > pthread_mutex_init(&sh->dv_mutex, NULL);
> > sh->tx_ns = ns;
> > +#ifdef HAVE_MLX5DV_DR_ESWITCH
> > + if (priv->config.dv_eswitch_en) {
> > + ns = mlx5_glue->dr_create_ns(sh->ctx,
> > +
> MLX5DV_DR_NS_DOMAIN_FDB_BYPASS);
> > + if (!ns) {
> > + DRV_LOG(ERR, "FDB mlx5dv_dr_create_ns failed");
> > + err = errno;
> > + goto error;
> > + }
> > + sh->fdb_ns = ns;
> > + }
> > +#endif
> > sh->dv_refcnt++;
> > priv->dr_shared = 1;
> > return 0;
> > @@ -358,6 +373,10 @@ struct mlx5_dev_spawn_data {
> > mlx5dv_dr_destroy_ns(sh->tx_ns);
> > sh->tx_ns = NULL;
> > }
> > + if (sh->fdb_ns) {
> > + mlx5_glue->dr_destroy_ns(sh->fdb_ns);
> > + sh->fdb_ns = NULL;
> > + }
> > return err;
> > #else
> > (void)priv;
> > @@ -393,6 +412,12 @@ struct mlx5_dev_spawn_data {
> > mlx5dv_dr_destroy_ns(sh->tx_ns);
> > sh->tx_ns = NULL;
> > }
> > +#ifdef HAVE_MLX5DV_DR_ESWITCH
> > + if (sh->fdb_ns) {
> > + mlx5_glue->dr_destroy_ns(sh->fdb_ns);
> > + sh->fdb_ns = NULL;
> > + }
> > +#endif
> > pthread_mutex_destroy(&sh->dv_mutex);
> > #else
> > (void)priv;
> > @@ -861,6 +886,8 @@ struct mlx5_dev_spawn_data {
> > config->l3_vxlan_en = !!tmp;
> > } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
> > config->vf_nl_en = !!tmp;
> > + } else if (strcmp(MLX5_DV_ESWITCH_EN, key) == 0) {
> > + config->dv_eswitch_en = !!tmp;
>
> Do we really need to make it configurable? What is the purpose of doing that?
> If
> esw dr isn't supported, it can fall back to tcf but, if supported, why not using
> it? We still have dv_flow_en. If dv_flow_en is disabled, we should disable dv
> esw too. But we need not configure the two individually. Thoughts?
>
I agree and this is the default value, but since there are some basic initializations that are done for the E-Switch,
for example opening the name space, I can see that in some cases the user would like do disable this option.
> > } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
> > config->dv_flow_en = !!tmp;
> > } else if (strcmp(MLX5_MR_EXT_MEMSEG_EN, key) == 0) {
> > @@ -905,6 +932,7 @@ struct mlx5_dev_spawn_data {
> > MLX5_RX_VEC_EN,
> > MLX5_L3_VXLAN_EN,
> > MLX5_VF_NL_EN,
> > + MLX5_DV_ESWITCH_EN,
> > MLX5_DV_FLOW_EN,
> > MLX5_MR_EXT_MEMSEG_EN,
> > MLX5_REPRESENTOR,
> > @@ -1458,11 +1486,6 @@ struct mlx5_dev_spawn_data {
> > priv->tcf_context = NULL;
> > }
> > }
> > - if (config.dv_flow_en) {
> > - err = mlx5_alloc_shared_dr(priv);
> > - if (err)
> > - goto error;
> > - }
> > TAILQ_INIT(&priv->flows);
> > TAILQ_INIT(&priv->ctrl_flows);
> > /* Hint libmlx5 to use PMD allocator for data plane resources */
> > @@ -1484,8 +1507,26 @@ struct mlx5_dev_spawn_data {
> > * Verbs context returned by ibv_open_device().
> > */
> > mlx5_link_update(eth_dev, 0);
> > +#ifdef HAVE_IBV_DEVX_OBJ
> > + err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr);
> > + if (err) {
> > + err = -err;
> > + goto error;
> > + }
> > +#endif
> > +#ifdef HAVE_MLX5DV_DR_ESWITCH
> > + if (!config.hca_attr.eswitch_manager)
> > + config.dv_eswitch_en = 0;
> > +#else
> > + config.dv_eswitch_en = 0;
> > +#endif
> > /* Store device configuration on private structure. */
> > priv->config = config;
> > + if (config.dv_flow_en) {
> > + err = mlx5_alloc_shared_dr(priv);
> > + if (err)
> > + goto error;
> > + }
> > /* Supported Verbs flow priority number detection. */
> > err = mlx5_flow_discover_priorities(eth_dev);
> > if (err < 0) {
> > @@ -1876,6 +1917,7 @@ struct mlx5_dev_spawn_data {
> > .max_memcpy_len =
> MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
> > .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
> > },
> > + .dv_eswitch_en = 1,
> > };
> > /* Device specific configuration. */
> > switch (pci_dev->id.device_id) {
> > diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> > index 14c7f3c..33a4127 100644
> > --- a/drivers/net/mlx5/mlx5.h
> > +++ b/drivers/net/mlx5/mlx5.h
> > @@ -138,6 +138,11 @@ struct mlx5_devx_counter_set {
> > int id; /* Flow counter ID */
> > };
> >
> > +/* HCA attributes. */
> > +struct mlx5_hca_attr {
> > + uint32_t eswitch_manager:1;
> > +};
> > +
> > /* Flow list . */
> > TAILQ_HEAD(mlx5_flows, rte_flow);
> >
> > @@ -171,6 +176,7 @@ struct mlx5_dev_config {
> > /* Whether memseg should be extended for MR creation. */
> > unsigned int l3_vxlan_en:1; /* Enable L3 VXLAN flow creation. */
> > unsigned int vf_nl_en:1; /* Enable Netlink requests in VF mode. */
> > + unsigned int dv_eswitch_en:1; /* Enable eswitch DV flow. */
> > unsigned int dv_flow_en:1; /* Enable DV flow. */
> > unsigned int swp:1; /* Tx generic tunnel checksum and TSO offload. */
> > unsigned int devx:1; /* Whether devx interface is available or not. */
> > @@ -192,6 +198,7 @@ struct mlx5_dev_config {
> > int txqs_inline; /* Queue number threshold for inlining. */
> > int txqs_vec; /* Queue number threshold for vectorized Tx. */
> > int inline_max_packet_sz; /* Max packet size for inlining. */
> > + struct mlx5_hca_attr hca_attr; /* HCA attributes. */
> > };
> >
> > /**
> > @@ -241,6 +248,7 @@ struct mlx5_flow_tbl_resource {
> > };
> >
> > #define MLX5_MAX_TABLES 1024
> > +#define MLX5_MAX_TABLES_FDB 32
> > #define MLX5_GROUP_FACTOR 1
> >
> > /*
> > @@ -260,6 +268,8 @@ struct mlx5_ibv_shared {
> > /* Shared DV/DR flow data section. */
> > pthread_mutex_t dv_mutex; /* DV context mutex. */
> > uint32_t dv_refcnt; /* DV/DR data reference counter. */
> > + void *fdb_ns; /* FDB Direct Rules name space handle. */
> > + struct mlx5_flow_tbl_resource fdb_tbl[MLX5_MAX_TABLES_FDB];
> > void *rx_ns; /* RX Direct Rules name space handle. */
> > struct mlx5_flow_tbl_resource rx_tbl[MLX5_MAX_TABLES];
> > /* RX Direct Rules tables. */
> > @@ -539,4 +549,6 @@ int mlx5_devx_cmd_flow_counter_alloc(struct
> ibv_context *ctx,
> > int mlx5_devx_cmd_flow_counter_query(struct mlx5_devx_counter_set
> *dcx,
> > int clear,
> > uint64_t *pkts, uint64_t *bytes);
> > +int mlx5_devx_cmd_query_hca_attr(struct ibv_context *ctx,
> > + struct mlx5_hca_attr *attr);
> > #endif /* RTE_PMD_MLX5_H_ */
> > diff --git a/drivers/net/mlx5/mlx5_devx_cmds.c
> b/drivers/net/mlx5/mlx5_devx_cmds.c
> > index a9dff58..3caea41 100644
> > --- a/drivers/net/mlx5/mlx5_devx_cmds.c
> > +++ b/drivers/net/mlx5/mlx5_devx_cmds.c
> > @@ -105,3 +105,45 @@ int mlx5_devx_cmd_flow_counter_free(struct
> mlx5dv_devx_obj *obj)
> > *bytes = MLX5_GET64(traffic_counter, stats, octets);
> > return 0;
> > }
> > +
> > +/**
> > + * Query HCA attributes.
>
> Need to be more informative. What to query here? Please specify in detail.
>
O.K.
> > + *
> > + * @param[in] ctx
> > + * ibv contexts returned from mlx5dv_open_device.
> > + * @param[out] attr
> > + * Attributes device values.
> > + *
> > + * @return
> > + * 0 on success, a negative value otherwise.
> > + */
> > +int
> > +mlx5_devx_cmd_query_hca_attr(struct ibv_context *ctx,
> > + struct mlx5_hca_attr *attr)
> > +{
> > + uint32_t in[MLX5_ST_SZ_DW(query_hca_cap_in)] = {0};
> > + uint32_t out[MLX5_ST_SZ_DW(query_hca_cap_out)] = {0};
> > + void *hcattr;
> > + int status, syndrome, rc;
> > +
> > + MLX5_SET(query_hca_cap_in, in, opcode,
> MLX5_CMD_OP_QUERY_HCA_CAP);
> > + MLX5_SET(query_hca_cap_in, in, op_mod,
> > + MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE |
> > + MLX5_HCA_CAP_OPMOD_GET_CUR);
> > +
> > + rc = mlx5_glue->devx_general_cmd(ctx,
> > + in, sizeof(in), out, sizeof(out));
> > + if (rc)
> > + return rc;
> > + status = MLX5_GET(query_hca_cap_out, out, status);
> > + syndrome = MLX5_GET(query_hca_cap_out, out, syndrome);
> > + if (status) {
> > + DRV_LOG(DEBUG, "Failed to query devx HCA capabilities, "
> > + "status %x, syndrome = %x",
> > + status, syndrome);
> > + return -1;
> > + }
> > + hcattr = MLX5_ADDR_OF(query_hca_cap_out, out, capability);
> > + attr->eswitch_manager = MLX5_GET(cmd_hca_cap, hcattr,
> eswitch_manager);
> > + return 0;
> > +}
> > diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> > index a0683ee..83abc14 100644
> > --- a/drivers/net/mlx5/mlx5_flow.c
> > +++ b/drivers/net/mlx5/mlx5_flow.c
> > @@ -1784,7 +1784,7 @@ uint32_t mlx5_flow_adjust_priority(struct
> rte_eth_dev *dev, int32_t priority,
> > struct mlx5_priv *priv = dev->data->dev_private;
> > enum mlx5_flow_drv_type type = MLX5_FLOW_TYPE_MAX;
> >
> > - if (attr->transfer)
> > + if (attr->transfer && !priv->config.dv_eswitch_en)
>
> To make sure it works as intended, a critical precondition MUST be met.
> "If dv_flow_en is set, dv_eswitch_en is also set."
>
> Think about a case where
> attr->transfer is set
> dv_eswtich_en is set
> dv_flow_en is unset
>
> MLX5_FLOW_TYPE_VERBS can't handle 'transfer' case, can it?
>
If (dv_flow_en == 0 ) then dv_switch_en = 0
> > type = MLX5_FLOW_TYPE_TCF;
> > else
> > type = priv->config.dv_flow_en ? MLX5_FLOW_TYPE_DV :
> > diff --git a/drivers/net/mlx5/mlx5_prm.h b/drivers/net/mlx5/mlx5_prm.h
> > index b15266f..b25d4e8 100644
> > --- a/drivers/net/mlx5/mlx5_prm.h
> > +++ b/drivers/net/mlx5/mlx5_prm.h
> > @@ -529,6 +529,7 @@ enum {
> > };
> >
> > enum {
> > + MLX5_CMD_OP_QUERY_HCA_CAP = 0x100,
> > MLX5_CMD_OP_ALLOC_FLOW_COUNTER = 0x939,
> > MLX5_CMD_OP_QUERY_FLOW_COUNTER = 0x93b,
> > };
> > @@ -591,6 +592,333 @@ struct mlx5_ifc_query_flow_counter_in_bits {
> > u8 flow_counter_id[0x20];
> > };
> >
>
> Please fix all the indentation violation from here.
>
It is the same indentation as all other cmd structures.
It is also a copy from the kernel and is based on automatic generation of the PRM.
> > +enum {
> > + MLX5_GET_HCA_CAP_OP_MOD_GENERAL_DEVICE = 0x0 << 1,
> > + MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP = 0xc << 1,
> > +};
> > +
> > +enum {
> > + MLX5_HCA_CAP_OPMOD_GET_MAX = 0,
> > + MLX5_HCA_CAP_OPMOD_GET_CUR = 1,
> > +};
> > +
> > +struct mlx5_ifc_cmd_hca_cap_bits {
> > + u8 reserved_at_0[0x30];
> > + u8 vhca_id[0x10];
> > + u8 reserved_at_40[0x40];
> > + u8 log_max_srq_sz[0x8];
> > + u8 log_max_qp_sz[0x8];
> > + u8 reserved_at_90[0xb];
> > + u8 log_max_qp[0x5];
> > + u8 reserved_at_a0[0xb];
> > + u8 log_max_srq[0x5];
> > + u8 reserved_at_b0[0x10];
> > + u8 reserved_at_c0[0x8];
> > + u8 log_max_cq_sz[0x8];
> > + u8 reserved_at_d0[0xb];
> > + u8 log_max_cq[0x5];
> > + u8 log_max_eq_sz[0x8];
> > + u8 reserved_at_e8[0x2];
> > + u8 log_max_mkey[0x6];
> > + u8 reserved_at_f0[0x8];
> > + u8 dump_fill_mkey[0x1];
> > + u8 reserved_at_f9[0x3];
> > + u8 log_max_eq[0x4];
> > + u8 max_indirection[0x8];
> > + u8 fixed_buffer_size[0x1];
> > + u8 log_max_mrw_sz[0x7];
> > + u8 force_teardown[0x1];
> > + u8 reserved_at_111[0x1];
> > + u8 log_max_bsf_list_size[0x6];
> > + u8 umr_extended_translation_offset[0x1];
> > + u8 null_mkey[0x1];
> > + u8 log_max_klm_list_size[0x6];
> > + u8 reserved_at_120[0xa];
> > + u8 log_max_ra_req_dc[0x6];
> > + u8 reserved_at_130[0xa];
> > + u8 log_max_ra_res_dc[0x6];
> > + u8 reserved_at_140[0xa];
> > + u8 log_max_ra_req_qp[0x6];
> > + u8 reserved_at_150[0xa];
> > + u8 log_max_ra_res_qp[0x6];
> > + u8 end_pad[0x1];
> > + u8 cc_query_allowed[0x1];
> > + u8 cc_modify_allowed[0x1];
> > + u8 start_pad[0x1];
> > + u8 cache_line_128byte[0x1];
> > + u8 reserved_at_165[0xa];
> > + u8 qcam_reg[0x1];
> > + u8 gid_table_size[0x10];
> > + u8 out_of_seq_cnt[0x1];
> > + u8 vport_counters[0x1];
> > + u8 retransmission_q_counters[0x1];
> > + u8 debug[0x1];
> > + u8 modify_rq_counter_set_id[0x1];
> > + u8 rq_delay_drop[0x1];
> > + u8 max_qp_cnt[0xa];
> > + u8 pkey_table_size[0x10];
> > + u8 vport_group_manager[0x1];
> > + u8 vhca_group_manager[0x1];
> > + u8 ib_virt[0x1];
> > + u8 eth_virt[0x1];
> > + u8 vnic_env_queue_counters[0x1];
> > + u8 ets[0x1];
> > + u8 nic_flow_table[0x1];
> > + u8 eswitch_manager[0x1];
> > + u8 device_memory[0x1];
> > + u8 mcam_reg[0x1];
> > + u8 pcam_reg[0x1];
> > + u8 local_ca_ack_delay[0x5];
> > + u8 port_module_event[0x1];
> > + u8 enhanced_error_q_counters[0x1];
> > + u8 ports_check[0x1];
> > + u8 reserved_at_1b3[0x1];
> > + u8 disable_link_up[0x1];
> > + u8 beacon_led[0x1];
> > + u8 port_type[0x2];
> > + u8 num_ports[0x8];
> > + u8 reserved_at_1c0[0x1];
> > + u8 pps[0x1];
> > + u8 pps_modify[0x1];
> > + u8 log_max_msg[0x5];
> > + u8 reserved_at_1c8[0x4];
> > + u8 max_tc[0x4];
> > + u8 temp_warn_event[0x1];
> > + u8 dcbx[0x1];
> > + u8 general_notification_event[0x1];
> > + u8 reserved_at_1d3[0x2];
> > + u8 fpga[0x1];
> > + u8 rol_s[0x1];
> > + u8 rol_g[0x1];
> > + u8 reserved_at_1d8[0x1];
> > + u8 wol_s[0x1];
> > + u8 wol_g[0x1];
> > + u8 wol_a[0x1];
> > + u8 wol_b[0x1];
> > + u8 wol_m[0x1];
> > + u8 wol_u[0x1];
> > + u8 wol_p[0x1];
> > + u8 stat_rate_support[0x10];
> > + u8 reserved_at_1f0[0xc];
> > + u8 cqe_version[0x4];
> > + u8 compact_address_vector[0x1];
> > + u8 striding_rq[0x1];
> > + u8 reserved_at_202[0x1];
> > + u8 ipoib_enhanced_offloads[0x1];
> > + u8 ipoib_basic_offloads[0x1];
> > + u8 reserved_at_205[0x1];
> > + u8 repeated_block_disabled[0x1];
> > + u8 umr_modify_entity_size_disabled[0x1];
> > + u8 umr_modify_atomic_disabled[0x1];
> > + u8 umr_indirect_mkey_disabled[0x1];
> > + u8 umr_fence[0x2];
> > + u8 reserved_at_20c[0x3];
> > + u8 drain_sigerr[0x1];
> > + u8 cmdif_checksum[0x2];
> > + u8 sigerr_cqe[0x1];
> > + u8 reserved_at_213[0x1];
> > + u8 wq_signature[0x1];
> > + u8 sctr_data_cqe[0x1];
> > + u8 reserved_at_216[0x1];
> > + u8 sho[0x1];
> > + u8 tph[0x1];
> > + u8 rf[0x1];
> > + u8 dct[0x1];
> > + u8 qos[0x1];
> > + u8 eth_net_offloads[0x1];
> > + u8 roce[0x1];
> > + u8 atomic[0x1];
> > + u8 reserved_at_21f[0x1];
> > + u8 cq_oi[0x1];
> > + u8 cq_resize[0x1];
> > + u8 cq_moderation[0x1];
> > + u8 reserved_at_223[0x3];
> > + u8 cq_eq_remap[0x1];
> > + u8 pg[0x1];
> > + u8 block_lb_mc[0x1];
> > + u8 reserved_at_229[0x1];
> > + u8 scqe_break_moderation[0x1];
> > + u8 cq_period_start_from_cqe[0x1];
> > + u8 cd[0x1];
> > + u8 reserved_at_22d[0x1];
> > + u8 apm[0x1];
> > + u8 vector_calc[0x1];
> > + u8 umr_ptr_rlky[0x1];
> > + u8 imaicl[0x1];
> > + u8 reserved_at_232[0x4];
> > + u8 qkv[0x1];
> > + u8 pkv[0x1];
> > + u8 set_deth_sqpn[0x1];
> > + u8 reserved_at_239[0x3];
> > + u8 xrc[0x1];
> > + u8 ud[0x1];
> > + u8 uc[0x1];
> > + u8 rc[0x1];
> > + u8 uar_4k[0x1];
> > + u8 reserved_at_241[0x9];
> > + u8 uar_sz[0x6];
> > + u8 reserved_at_250[0x8];
> > + u8 log_pg_sz[0x8];
> > + u8 bf[0x1];
> > + u8 driver_version[0x1];
> > + u8 pad_tx_eth_packet[0x1];
> > + u8 reserved_at_263[0x8];
> > + u8 log_bf_reg_size[0x5];
> > + u8 reserved_at_270[0xb];
> > + u8 lag_master[0x1];
> > + u8 num_lag_ports[0x4];
> > + u8 reserved_at_280[0x10];
> > + u8 max_wqe_sz_sq[0x10];
> > + u8 reserved_at_2a0[0x10];
> > + u8 max_wqe_sz_rq[0x10];
> > + u8 max_flow_counter_31_16[0x10];
> > + u8 max_wqe_sz_sq_dc[0x10];
> > + u8 reserved_at_2e0[0x7];
> > + u8 max_qp_mcg[0x19];
> > + u8 reserved_at_300[0x10];
> > + u8 flow_counter_bulk_alloc[0x08];
> > + u8 log_max_mcg[0x8];
> > + u8 reserved_at_320[0x3];
> > + u8 log_max_transport_domain[0x5];
> > + u8 reserved_at_328[0x3];
> > + u8 log_max_pd[0x5];
> > + u8 reserved_at_330[0xb];
> > + u8 log_max_xrcd[0x5];
> > + u8 nic_receive_steering_discard[0x1];
> > + u8 receive_discard_vport_down[0x1];
> > + u8 transmit_discard_vport_down[0x1];
> > + u8 reserved_at_343[0x5];
> > + u8 log_max_flow_counter_bulk[0x8];
> > + u8 max_flow_counter_15_0[0x10];
> > + u8 reserved_at_360[0x3];
> > + u8 log_max_rq[0x5];
> > + u8 reserved_at_368[0x3];
> > + u8 log_max_sq[0x5];
> > + u8 reserved_at_370[0x3];
> > + u8 log_max_tir[0x5];
> > + u8 reserved_at_378[0x3];
> > + u8 log_max_tis[0x5];
> > + u8 basic_cyclic_rcv_wqe[0x1];
> > + u8 reserved_at_381[0x2];
> > + u8 log_max_rmp[0x5];
> > + u8 reserved_at_388[0x3];
> > + u8 log_max_rqt[0x5];
> > + u8 reserved_at_390[0x3];
> > + u8 log_max_rqt_size[0x5];
> > + u8 reserved_at_398[0x3];
> > + u8 log_max_tis_per_sq[0x5];
> > + u8 ext_stride_num_range[0x1];
> > + u8 reserved_at_3a1[0x2];
> > + u8 log_max_stride_sz_rq[0x5];
> > + u8 reserved_at_3a8[0x3];
> > + u8 log_min_stride_sz_rq[0x5];
> > + u8 reserved_at_3b0[0x3];
> > + u8 log_max_stride_sz_sq[0x5];
> > + u8 reserved_at_3b8[0x3];
> > + u8 log_min_stride_sz_sq[0x5];
> > + u8 hairpin[0x1];
> > + u8 reserved_at_3c1[0x2];
> > + u8 log_max_hairpin_queues[0x5];
> > + u8 reserved_at_3c8[0x3];
> > + u8 log_max_hairpin_wq_data_sz[0x5];
> > + u8 reserved_at_3d0[0x3];
> > + u8 log_max_hairpin_num_packets[0x5];
> > + u8 reserved_at_3d8[0x3];
> > + u8 log_max_wq_sz[0x5];
> > + u8 nic_vport_change_event[0x1];
> > + u8 disable_local_lb_uc[0x1];
> > + u8 disable_local_lb_mc[0x1];
> > + u8 log_min_hairpin_wq_data_sz[0x5];
> > + u8 reserved_at_3e8[0x3];
> > + u8 log_max_vlan_list[0x5];
> > + u8 reserved_at_3f0[0x3];
> > + u8 log_max_current_mc_list[0x5];
> > + u8 reserved_at_3f8[0x3];
> > + u8 log_max_current_uc_list[0x5];
> > + u8 general_obj_types[0x40];
> > + u8 reserved_at_440[0x20];
> > + u8 reserved_at_460[0x10];
> > + u8 max_num_eqs[0x10];
> > + u8 reserved_at_480[0x3];
> > + u8 log_max_l2_table[0x5];
> > + u8 reserved_at_488[0x8];
> > + u8 log_uar_page_sz[0x10];
> > + u8 reserved_at_4a0[0x20];
> > + u8 device_frequency_mhz[0x20];
> > + u8 device_frequency_khz[0x20];
> > + u8 reserved_at_500[0x20];
> > + u8 num_of_uars_per_page[0x20];
> > + u8 flex_parser_protocols[0x20];
> > + u8 reserved_at_560[0x20];
> > + u8 reserved_at_580[0x3c];
> > + u8 mini_cqe_resp_stride_index[0x1];
> > + u8 cqe_128_always[0x1];
> > + u8 cqe_compression_128[0x1];
> > + u8 cqe_compression[0x1];
> > + u8 cqe_compression_timeout[0x10];
> > + u8 cqe_compression_max_num[0x10];
> > + u8 reserved_at_5e0[0x10];
> > + u8 tag_matching[0x1];
> > + u8 rndv_offload_rc[0x1];
> > + u8 rndv_offload_dc[0x1];
> > + u8 log_tag_matching_list_sz[0x5];
> > + u8 reserved_at_5f8[0x3];
> > + u8 log_max_xrq[0x5];
> > + u8 affiliate_nic_vport_criteria[0x8];
> > + u8 native_port_num[0x8];
> > + u8 num_vhca_ports[0x8];
> > + u8 reserved_at_618[0x6];
> > + u8 sw_owner_id[0x1];
> > + u8 reserved_at_61f[0x1e1];
> > +};
> > +
> > +struct mlx5_ifc_qos_cap_bits {
> > + u8 packet_pacing[0x1];
> > + u8 esw_scheduling[0x1];
> > + u8 esw_bw_share[0x1];
> > + u8 esw_rate_limit[0x1];
> > + u8 reserved_at_4[0x1];
> > + u8 packet_pacing_burst_bound[0x1];
> > + u8 packet_pacing_typical_size[0x1];
> > + u8 flow_meter_srtcm[0x1];
> > + u8 reserved_at_8[0x8];
> > + u8 log_max_flow_meter[0x8];
> > + u8 flow_meter_reg_id[0x8];
> > + u8 reserved_at_25[0x20];
> > + u8 packet_pacing_max_rate[0x20];
> > + u8 packet_pacing_min_rate[0x20];
> > + u8 reserved_at_80[0x10];
> > + u8 packet_pacing_rate_table_size[0x10];
> > + u8 esw_element_type[0x10];
> > + u8 esw_tsar_type[0x10];
> > + u8 reserved_at_c0[0x10];
> > + u8 max_qos_para_vport[0x10];
> > + u8 max_tsar_bw_share[0x20];
> > + u8 reserved_at_100[0x6e8];
> > +};
> > +
> > +union mlx5_ifc_hca_cap_union_bits {
> > + struct mlx5_ifc_cmd_hca_cap_bits cmd_hca_cap;
> > + struct mlx5_ifc_qos_cap_bits qos_cap;
> > + u8 reserved_at_0[0x8000];
> > +};
> > +
> > +struct mlx5_ifc_query_hca_cap_out_bits {
> > + u8 status[0x8];
> > + u8 reserved_at_8[0x18];
> > + u8 syndrome[0x20];
> > + u8 reserved_at_40[0x40];
> > + union mlx5_ifc_hca_cap_union_bits capability;
> > +};
> > +
> > +struct mlx5_ifc_query_hca_cap_in_bits {
> > + u8 opcode[0x10];
> > + u8 reserved_at_10[0x10];
> > + u8 reserved_at_20[0x10];
> > + u8 op_mod[0x10];
> > + u8 reserved_at_40[0x40];
> > +};
> > +
> > /* CQE format mask. */
> > #define MLX5E_CQE_FORMAT_MASK 0xc
> >
> > --
> > 1.8.3.1
>
> Thanks
> Yongseok
More information about the dev
mailing list