[dpdk-dev] [PATCH] net/ixgbe: 10GBASE-T SFP+ copper support

[Ananyev, Konstantin]

> 
> From: Ido Goshen <ido at cgstowernetworks.com>
> 
> 10BASE-T SFP+ copper transceivers become cheaper and popular
> So far those were blocked by ixgbe as “unsupported”.
> e.g.
> 	eth_ixgbe_dev_init(): Unsupported SFP+ Module
> 	eth_ixgbe_dev_init(): Hardware Initialization Failure: -19
> 	EAL: Requested device 0000:0a:00.0 cannot be used
> 
> This patch expands the usage of allow_unsupported_sfp to be more general
> and makes ixgbe more tolerant to unknown SFPs


I don't think it is a good idea to change the base code to blindly allow unknown SFPs.
Again in eth_ixgbe_dev_init() we do set 
hw->allow_unsupported_sfp = 1;
so the function below will return success anyway,

> 
> Signed-off-by: Ido Goshen <ido at cgstowernetworks.com>
> ---
>  drivers/net/ixgbe/base/ixgbe_phy.c  | 22 +++++++++++-----------
>  drivers/net/ixgbe/base/ixgbe_x550.c |  3 +++
>  2 files changed, 14 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
> index dd118f9..ff96afc 100644
> --- a/drivers/net/ixgbe/base/ixgbe_phy.c
> +++ b/drivers/net/ixgbe/base/ixgbe_phy.c
> @@ -1527,18 +1527,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
>  			if (hw->phy.type == ixgbe_phy_sfp_intel) {
>  				status = IXGBE_SUCCESS;
>  			} else {
> -				if (hw->allow_unsupported_sfp == true) {
> -					EWARN(hw,
> -						"WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet
> Optics. "
> -						"Using untested modules is not supported and may cause unstable operation or damage
> to the module or the adapter. "
> -						"Intel Corporation is not responsible for any harm caused by using untested modules.\n");
> -					status = IXGBE_SUCCESS;
> -				} else {
> -					DEBUGOUT("SFP+ module not supported\n");
> -					hw->phy.type =
> +				hw->phy.type =
>  						ixgbe_phy_sfp_unsupported;
> -					status = IXGBE_ERR_SFP_NOT_SUPPORTED;
> -				}
> +				status = IXGBE_ERR_SFP_NOT_SUPPORTED;
>  			}
>  		} else {
>  			status = IXGBE_SUCCESS;
> @@ -1546,6 +1537,15 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
>  	}
> 
>  out:
> +	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED &&
> +			hw->allow_unsupported_sfp) {
> +		PMD_INIT_LOG(WARNING,
> +				"WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. "
> +				"Using untested modules is not supported and may cause unstable operation or damage to the module or
> the adapter. "
> +				"Intel Corporation is not responsible for any harm caused by using untested modules.\n");
> +		hw->phy.type = ixgbe_phy_unknown;
> +		status = IXGBE_SUCCESS;
> +	}
>  	return status;
> 
>  err_read_i2c_eeprom:
> diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
> index a920a14..212d9a0 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x550.c
> +++ b/drivers/net/ixgbe/base/ixgbe_x550.c
> @@ -1539,6 +1539,9 @@ STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
>  		*linear = false;
>  		break;
>  	case ixgbe_sfp_type_unknown:
> +		if (hw->allow_unsupported_sfp)
> +			return IXGBE_SUCCESS;
> +		/* fall through */
>  	case ixgbe_sfp_type_1g_cu_core0:
>  	case ixgbe_sfp_type_1g_cu_core1:
>  	default:
> --
> 1.9.1