[dpdk-dev] [PATCH v2 02/12] raw/ifpga_rawdev/base: add irq support

[Zhang, Tianfei]

> -----Original Message-----
> From: Jerin Jacob Kollanukkaran [mailto:jerinj at marvell.com]
> Sent: Friday, August 2, 2019 11:58 AM
> To: Xu, Rosen <rosen.xu at intel.com>; dev at dpdk.org
> Cc: Yigit, Ferruh <ferruh.yigit at intel.com>; Zhang, Tianfei
> <tianfei.zhang at intel.com>; Pei, Andy <andy.pei at intel.com>; Lomartire,
> David <david.lomartire at intel.com>; Zhang, Qi Z <qi.z.zhang at intel.com>; Ye,
> Xiaolong <xiaolong.ye at intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 02/12] raw/ifpga_rawdev/base: add irq
> support
> 
> > -----Original Message-----
> > From: dev <dev-bounces at dpdk.org> On Behalf Of Rosen Xu
> > Sent: Friday, August 2, 2019 6:49 AM
> > To: dev at dpdk.org
> > Cc: ferruh.yigit at intel.com; tianfei.zhang at intel.com;
> > rosen.xu at intel.com; andy.pei at intel.com; david.lomartire at intel.com;
> > qi.z.zhang at intel.com; xiaolong.ye at intel.com
> > Subject: [dpdk-dev] [PATCH v2 02/12] raw/ifpga_rawdev/base: add irq
> > support
> >
> > From: Tianfei zhang <tianfei.zhang at intel.com>
> >
> > Add irq support for ifpga FME globle error, port error and uint unit.
> > We implmented this feature by vfio interrupt mechanism.
> >
> > Signed-off-by: Tianfei zhang <tianfei.zhang at intel.com>
> > ---
> >  drivers/raw/ifpga_rawdev/base/ifpga_feature_dev.c | 61
> > +++++++++++++++++++++++
> >  drivers/raw/ifpga_rawdev/base/ifpga_fme_error.c   | 22 ++++++++
> >  drivers/raw/ifpga_rawdev/base/ifpga_port.c        | 20 ++++++++
> >  drivers/raw/ifpga_rawdev/base/ifpga_port_error.c  | 21 ++++++++
> >  4 files changed, 124 insertions(+)
> >
> > diff --git a/drivers/raw/ifpga_rawdev/base/ifpga_feature_dev.c
> > b/drivers/raw/ifpga_rawdev/base/ifpga_feature_dev.c
> > index 63c8bcc..6b942e6 100644
> > --- a/drivers/raw/ifpga_rawdev/base/ifpga_feature_dev.c
> > +++ b/drivers/raw/ifpga_rawdev/base/ifpga_feature_dev.c
> > @@ -3,6 +3,7 @@
> >   */
> >
> >  #include <sys/ioctl.h>
> > +#include <rte_vfio.h>
> >
> >  #include "ifpga_feature_dev.h"
> >
> > @@ -331,3 +332,63 @@ int port_hw_init(struct ifpga_port_hw *port)
> >  	port_hw_uinit(port);
> >  	return ret;
> >  }
> > +
> > +/*
> > + * FIXME: we should get msix vec count during pci enumeration instead
> > +of
> > + * below hardcode value.
> > + */
> > +#define FPGA_MSIX_VEC_COUNT	20
> > +/* irq set buffer length for interrupt */ #define
> > +MSIX_IRQ_SET_BUF_LEN (sizeof(struct vfio_irq_set) + \
> > +				sizeof(int) * FPGA_MSIX_VEC_COUNT)
> > +
> > +/* only support msix for now*/
> > +static int vfio_msix_enable_block(s32 vfio_dev_fd, unsigned int vec_start,
> > +				  unsigned int count, s32 *fds)
> 
> Isn't better to use generic EAL function for the same?

In our PAC N3000 Card, we have 6 PCIe MSI-X vectors, for example:
0~3  for AFU
4    for Port
6    for FME

FME (FPGA Management Engine ) will manage all resources in FPGA, like partition reconfiguration, Power manager, thermal, Error reporting.
Port is a bridge between FME and AFU.
AFU is the accelerator unit which for customers logic.

So, we reserve some MSI-X vectors for end-user/customers to use the AFU, and end-user/customers can use
the AFU for networking acceleration or other acceleration.

The DPDK existing API like rte_intr_enable()->vfio_enable_msix() will bind all of the vectors at the same time and those vectors will register into one evenfd and one interrupt handler function.
That cannot satisfy our design. we hope that, each MSI-X vector bind into VFIO and register the interrupt handler function separately. Because the reserve vectors like
0~3 vectors for AFU, we don't know what exact usage for the end-user/customers in AFU logic, so it had better let them bind VFIO and register interrupt handler themselves.

One suggestion is we expand the vfio_enable_msix() function, let the caller to specify the start vector and the numbers of vectors to bind the VFIO.

static int
vfio_enable_msix(const struct rte_intr_handle *intr_handle, int start, int count) {
    ...
	irq_set->count = count;
	irq_set->start = start;
    ...
	return 0;
}