[dpdk-dev] [PATCH 09/63] net/ice/base: add SFF EEPROM AQ Command

[Qi Zhang]

read/write module eeprom on i2c bus.

Signed-off-by: Scott W Taylor <scott.w.taylor at intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr at intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang at intel.com>
---
 drivers/net/ice/base/ice_adminq_cmd.h | 29 ++++++++++++++++++++++
 drivers/net/ice/base/ice_common.c     | 46 +++++++++++++++++++++++++++++++++++
 drivers/net/ice/base/ice_common.h     |  5 +++-
 3 files changed, 79 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index 9e5853cca..4de69dd7a 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -1660,6 +1660,33 @@ struct ice_aqc_set_port_id_led {
 
 
 
+/* Read/Write SFF EEPROM command (indirect 0x06EE) */
+struct ice_aqc_sff_eeprom {
+	u8 lport_num;
+	u8 lport_num_valid;
+#define ICE_AQC_SFF_PORT_NUM_VALID	BIT(0)
+	__le16 i2c_bus_addr;
+#define ICE_AQC_SFF_I2CBUS_7BIT_M	0x7F
+#define ICE_AQC_SFF_I2CBUS_10BIT_M	0x3FF
+#define ICE_AQC_SFF_I2CBUS_TYPE_M	BIT(10)
+#define ICE_AQC_SFF_I2CBUS_TYPE_7BIT	0
+#define ICE_AQC_SFF_I2CBUS_TYPE_10BIT	ICE_AQC_SFF_I2CBUS_TYPE_M
+#define ICE_AQC_SFF_SET_EEPROM_PAGE_S	11
+#define ICE_AQC_SFF_SET_EEPROM_PAGE_M	(0x3 << ICE_AQC_SFF_SET_EEPROM_PAGE_S)
+#define ICE_AQC_SFF_NO_PAGE_CHANGE	0
+#define ICE_AQC_SFF_SET_23_ON_MISMATCH	1
+#define ICE_AQC_SFF_SET_22_ON_MISMATCH	2
+#define ICE_AQC_SFF_IS_WRITE		BIT(15)
+	__le16 i2c_mem_addr;
+	__le16 eeprom_page;
+#define  ICE_AQC_SFF_EEPROM_BANK_S 0
+#define  ICE_AQC_SFF_EEPROM_BANK_M (0xFF << ICE_AQC_SFF_EEPROM_BANK_S)
+#define  ICE_AQC_SFF_EEPROM_PAGE_S 8
+#define  ICE_AQC_SFF_EEPROM_PAGE_M (0xFF << ICE_AQC_SFF_EEPROM_PAGE_S)
+	__le32 addr_high;
+	__le32 addr_low;
+};
+
 /* NVM Read command (indirect 0x0701)
  * NVM Erase commands (direct 0x0702)
  * NVM Update commands (indirect 0x0703)
@@ -2218,6 +2245,7 @@ struct ice_aq_desc {
 		struct ice_aqc_get_phy_caps get_phy;
 		struct ice_aqc_set_phy_cfg set_phy;
 		struct ice_aqc_restart_an restart_an;
+		struct ice_aqc_sff_eeprom read_write_sff_param;
 		struct ice_aqc_set_port_id_led set_port_id_led;
 		struct ice_aqc_get_sw_cfg get_sw_conf;
 		struct ice_aqc_sw_rules sw_rules;
@@ -2431,6 +2459,7 @@ enum ice_adminq_opc {
 	ice_aqc_opc_set_port_option			= 0x06EB,
 	ice_aqc_opc_set_gpio				= 0x06EC,
 	ice_aqc_opc_get_gpio				= 0x06ED,
+	ice_aqc_opc_sff_eeprom				= 0x06EE,
 
 	/* NVM commands */
 	ice_aqc_opc_nvm_read				= 0x0701,
diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c
index 43c06948f..cd94995f4 100644
--- a/drivers/net/ice/base/ice_common.c
+++ b/drivers/net/ice/base/ice_common.c
@@ -2860,6 +2860,52 @@ ice_aq_set_port_id_led(struct ice_port_info *pi, bool is_orig_mode,
 }
 
 /**
+ * ice_aq_sff_eeprom
+ * @hw: pointer to the HW struct
+ * @lport: bits [7:0] = logical port, bit [8] = logical port valid
+ * @bus_addr: I2C bus address of the eeprom (typically 0xA0, 0=topo default)
+ * @mem_addr: I2C offset. lower 8 bits for address, 8 upper bits zero padding.
+ * @page: QSFP page
+ * @set_page: set or ignore the page
+ * @data: pointer to data buffer to be read/written to the I2C device.
+ * @length: 1-16 for read, 1 for write.
+ * @write: 0 read, 1 for write.
+ * @cd: pointer to command details structure or NULL
+ *
+ * Read/Write SFF EEPROM (0x06EE)
+ */
+enum ice_status
+ice_aq_sff_eeprom(struct ice_hw *hw, u16 lport, u8 bus_addr,
+		  u16 mem_addr, u8 page, u8 set_page, u8 *data, u8 length,
+		  bool write, struct ice_sq_cd *cd)
+{
+	struct ice_aqc_sff_eeprom *cmd;
+	struct ice_aq_desc desc;
+	enum ice_status status;
+
+	if (!data || (mem_addr & 0xff00))
+		return ICE_ERR_PARAM;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_sff_eeprom);
+	cmd = &desc.params.read_write_sff_param;
+	desc.flags = CPU_TO_LE16(ICE_AQ_FLAG_RD | ICE_AQ_FLAG_BUF);
+	cmd->lport_num = (u8)(lport & 0xff);
+	cmd->lport_num_valid = (u8)((lport >> 8) & 0x01);
+	cmd->i2c_bus_addr = CPU_TO_LE16(((bus_addr >> 1) &
+					 ICE_AQC_SFF_I2CBUS_7BIT_M) |
+					((set_page <<
+					  ICE_AQC_SFF_SET_EEPROM_PAGE_S) &
+					 ICE_AQC_SFF_SET_EEPROM_PAGE_M));
+	cmd->i2c_mem_addr = CPU_TO_LE16(mem_addr & 0xff);
+	cmd->eeprom_page = CPU_TO_LE16((u16)page << ICE_AQC_SFF_EEPROM_PAGE_S);
+	if (write)
+		cmd->i2c_bus_addr |= CPU_TO_LE16(ICE_AQC_SFF_IS_WRITE);
+
+	status = ice_aq_send_cmd(hw, &desc, data, length, cd);
+	return status;
+}
+
+/**
  * __ice_aq_get_set_rss_lut
  * @hw: pointer to the hardware structure
  * @vsi_id: VSI FW index
diff --git a/drivers/net/ice/base/ice_common.h b/drivers/net/ice/base/ice_common.h
index 4e44c2f13..d865021bf 100644
--- a/drivers/net/ice/base/ice_common.h
+++ b/drivers/net/ice/base/ice_common.h
@@ -163,7 +163,10 @@ ice_aq_set_mac_loopback(struct ice_hw *hw, bool ena_lpbk, struct ice_sq_cd *cd);
 enum ice_status
 ice_aq_set_port_id_led(struct ice_port_info *pi, bool is_orig_mode,
 		       struct ice_sq_cd *cd);
-
+enum ice_status
+ice_aq_sff_eeprom(struct ice_hw *hw, u16 lport, u8 bus_addr,
+		  u16 mem_addr, u8 page, u8 set_page, u8 *data, u8 length,
+		  bool write, struct ice_sq_cd *cd);
 
 
 enum ice_status
-- 
2.13.6