[dpdk-dev] [PATCH v4 04/11] crypto/nitrox: add basic symmetric cryptodev operations
Nagadheeraj Rottela
rnagadheeraj at marvell.com
Mon Aug 26 14:49:30 CEST 2019
Add the following cryptodev operations,
- dev_configure
- dev_start
- dev_stop
- dev_close
- dev_infos_get
Signed-off-by: Nagadheeraj Rottela <rnagadheeraj at marvell.com>
---
doc/guides/cryptodevs/features/nitrox.ini | 38 ++++++++++++
doc/guides/cryptodevs/nitrox.rst | 37 +++++++++++
drivers/crypto/nitrox/Makefile | 1 +
drivers/crypto/nitrox/meson.build | 1 +
drivers/crypto/nitrox/nitrox_sym.c | 81 ++++++++++++++++++++++++-
drivers/crypto/nitrox/nitrox_sym_capabilities.c | 57 +++++++++++++++++
drivers/crypto/nitrox/nitrox_sym_capabilities.h | 12 ++++
7 files changed, 226 insertions(+), 1 deletion(-)
create mode 100644 doc/guides/cryptodevs/features/nitrox.ini
create mode 100644 drivers/crypto/nitrox/nitrox_sym_capabilities.c
create mode 100644 drivers/crypto/nitrox/nitrox_sym_capabilities.h
diff --git a/doc/guides/cryptodevs/features/nitrox.ini b/doc/guides/cryptodevs/features/nitrox.ini
new file mode 100644
index 000000000..9f9e2619c
--- /dev/null
+++ b/doc/guides/cryptodevs/features/nitrox.ini
@@ -0,0 +1,38 @@
+;
+; Supported features of the 'nitrox' crypto driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Symmetric crypto = Y
+Sym operation chaining = Y
+HW Accelerated = Y
+In Place SGL = Y
+OOP SGL In SGL Out = Y
+OOP SGL In LB Out = Y
+OOP LB In SGL Out = Y
+OOP LB In LB Out = Y
+
+;
+; Supported crypto algorithms of the 'nitrox' crypto driver.
+;
+[Cipher]
+AES CBC (128) = Y
+AES CBC (192) = Y
+AES CBC (256) = Y
+
+;
+; Supported authentication algorithms of the 'nitrox' crypto driver.
+;
+[Auth]
+SHA1 HMAC = Y
+
+;
+; Supported AEAD algorithms of the 'nitrox' crypto driver.
+;
+[AEAD]
+
+;
+; Supported Asymmetric algorithms of the 'nitrox' crypto driver.
+;
+[Asymmetric]
diff --git a/doc/guides/cryptodevs/nitrox.rst b/doc/guides/cryptodevs/nitrox.rst
index b6b86dda5..c16a5e393 100644
--- a/doc/guides/cryptodevs/nitrox.rst
+++ b/doc/guides/cryptodevs/nitrox.rst
@@ -9,3 +9,40 @@ cryptographic operations to the NITROX V security processor. Detailed
information about the NITROX V security processor can be obtained here:
* https://www.marvell.com/security-solutions/nitrox-security-processors/nitrox-v/
+
+Features
+--------
+
+Nitrox crypto PMD has support for:
+
+Cipher algorithms:
+
+* ``RTE_CRYPTO_CIPHER_AES_CBC``
+
+Hash algorithms:
+
+* ``RTE_CRYPTO_AUTH_SHA1_HMAC``
+
+Limitations
+-----------
+
+* AES_CBC Cipher Only combination is not supported.
+
+Installation
+------------
+
+For compiling the Nitrox crypto PMD, please check if the
+CONFIG_RTE_LIBRTE_PMD_NITROX setting is set to `y` in config/common_base file.
+
+* ``CONFIG_RTE_LIBRTE_PMD_NITROX=y``
+
+Initialization
+--------------
+
+Nitrox crypto PMD depend on Nitrox kernel PF driver being installed on the
+platform. Nitrox PF driver is required to create VF devices which will
+be used by the PMD. Each VF device can enable one cryptodev PMD.
+
+Nitrox kernel PF driver is available as part of CNN55XX-Driver SDK. The SDK
+and it's installation instructions can be obtained from:
+`Marvell Technical Documentation Portal <https://support.cavium.com/>`_.
diff --git a/drivers/crypto/nitrox/Makefile b/drivers/crypto/nitrox/Makefile
index 06c96ccd7..dedb74a34 100644
--- a/drivers/crypto/nitrox/Makefile
+++ b/drivers/crypto/nitrox/Makefile
@@ -27,5 +27,6 @@ SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_device.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_hal.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_logs.c
SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_sym.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox_sym_capabilities.c
include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/nitrox/meson.build b/drivers/crypto/nitrox/meson.build
index 1277cf58e..7c565c5a4 100644
--- a/drivers/crypto/nitrox/meson.build
+++ b/drivers/crypto/nitrox/meson.build
@@ -13,4 +13,5 @@ sources = files(
'nitrox_hal.c',
'nitrox_logs.c',
'nitrox_sym.c',
+ 'nitrox_sym_capabilities.c',
)
diff --git a/drivers/crypto/nitrox/nitrox_sym.c b/drivers/crypto/nitrox/nitrox_sym.c
index c72016dd0..c05042e54 100644
--- a/drivers/crypto/nitrox/nitrox_sym.c
+++ b/drivers/crypto/nitrox/nitrox_sym.c
@@ -9,6 +9,7 @@
#include "nitrox_sym.h"
#include "nitrox_device.h"
+#include "nitrox_sym_capabilities.h"
#include "nitrox_logs.h"
#define CRYPTODEV_NAME_NITROX_PMD crypto_nitrox
@@ -25,6 +26,84 @@ static const struct rte_driver nitrox_rte_sym_drv = {
.alias = nitrox_sym_drv_name
};
+static int nitrox_sym_dev_qp_release(struct rte_cryptodev *cdev,
+ uint16_t qp_id);
+
+static int
+nitrox_sym_dev_config(__rte_unused struct rte_cryptodev *cdev,
+ __rte_unused struct rte_cryptodev_config *config)
+{
+ return 0;
+}
+
+static int
+nitrox_sym_dev_start(__rte_unused struct rte_cryptodev *cdev)
+{
+ return 0;
+}
+
+static void
+nitrox_sym_dev_stop(__rte_unused struct rte_cryptodev *cdev)
+{
+}
+
+static int
+nitrox_sym_dev_close(struct rte_cryptodev *cdev)
+{
+ int i, ret;
+
+ for (i = 0; i < cdev->data->nb_queue_pairs; i++) {
+ ret = nitrox_sym_dev_qp_release(cdev, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void
+nitrox_sym_dev_info_get(struct rte_cryptodev *cdev,
+ struct rte_cryptodev_info *info)
+{
+ struct nitrox_sym_device *sym_dev = cdev->data->dev_private;
+ struct nitrox_device *ndev = sym_dev->ndev;
+
+ if (!info)
+ return;
+
+ info->max_nb_queue_pairs = ndev->nr_queues;
+ info->feature_flags = cdev->feature_flags;
+ info->capabilities = nitrox_get_sym_capabilities();
+ info->driver_id = nitrox_sym_drv_id;
+ info->sym.max_nb_sessions = 0;
+}
+
+static int
+nitrox_sym_dev_qp_release(struct rte_cryptodev *cdev, uint16_t qp_id)
+{
+ RTE_SET_USED(cdev);
+ RTE_SET_USED(qp_id);
+ return 0;
+}
+
+static struct rte_cryptodev_ops nitrox_cryptodev_ops = {
+ .dev_configure = nitrox_sym_dev_config,
+ .dev_start = nitrox_sym_dev_start,
+ .dev_stop = nitrox_sym_dev_stop,
+ .dev_close = nitrox_sym_dev_close,
+ .dev_infos_get = nitrox_sym_dev_info_get,
+
+ .stats_get = NULL,
+ .stats_reset = NULL,
+
+ .queue_pair_setup = NULL,
+ .queue_pair_release = NULL,
+
+ .sym_session_get_size = NULL,
+ .sym_session_configure = NULL,
+ .sym_session_clear = NULL
+};
+
int
nitrox_sym_pmd_create(struct nitrox_device *ndev)
{
@@ -50,7 +129,7 @@ nitrox_sym_pmd_create(struct nitrox_device *ndev)
ndev->rte_sym_dev.name = cdev->data->name;
cdev->driver_id = nitrox_sym_drv_id;
- cdev->dev_ops = NULL;
+ cdev->dev_ops = &nitrox_cryptodev_ops;
cdev->enqueue_burst = NULL;
cdev->dequeue_burst = NULL;
cdev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
diff --git a/drivers/crypto/nitrox/nitrox_sym_capabilities.c b/drivers/crypto/nitrox/nitrox_sym_capabilities.c
new file mode 100644
index 000000000..aa1ff2638
--- /dev/null
+++ b/drivers/crypto/nitrox/nitrox_sym_capabilities.c
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include "nitrox_sym_capabilities.h"
+
+static const struct rte_cryptodev_capabilities nitrox_capabilities[] = {
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 1,
+ .max = 64,
+ .increment = 1
+ },
+ .digest_size = {
+ .min = 1,
+ .max = 20,
+ .increment = 1
+ },
+ .iv_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+const struct rte_cryptodev_capabilities *
+nitrox_get_sym_capabilities(void)
+{
+ return nitrox_capabilities;
+}
diff --git a/drivers/crypto/nitrox/nitrox_sym_capabilities.h b/drivers/crypto/nitrox/nitrox_sym_capabilities.h
new file mode 100644
index 000000000..cb2d97572
--- /dev/null
+++ b/drivers/crypto/nitrox/nitrox_sym_capabilities.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef _NITROX_SYM_CAPABILITIES_H_
+#define _NITROX_SYM_CAPABILITIES_H_
+
+#include <rte_cryptodev.h>
+
+const struct rte_cryptodev_capabilities *nitrox_get_sym_capabilities(void);
+
+#endif /* _NITROX_SYM_CAPABILITIES_H_ */
--
2.13.6
More information about the dev
mailing list