[dpdk-dev] [PATCH v6 2/6] test/bitops: add bit operation test case

Joyce Kong joyce.kong at arm.com
Wed Dec 18 07:00:04 CET 2019


Add test cases for set bit, clear bit, test and set bit,
test and clear bit operations.

Signed-off-by: Joyce Kong <joyce.kong at arm.com>
Reviewed-by: Gavin Hu <gavin.hu at arm.com>
Reviewed-by: Phil Yang <phil.yang at arm.com>
---
 app/test/Makefile         |   1 +
 app/test/autotest_data.py |   6 +
 app/test/meson.build      |   2 +
 app/test/test_bitops.c    | 305 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 314 insertions(+)
 create mode 100644 app/test/test_bitops.c

diff --git a/app/test/Makefile b/app/test/Makefile
index 57930c0..4f33274 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -70,6 +70,7 @@ SRCS-y += test_ticketlock.c
 SRCS-y += test_memory.c
 SRCS-y += test_memzone.c
 SRCS-y += test_bitmap.c
+SRCS-y += test_bitops.c
 SRCS-y += test_reciprocal_division.c
 SRCS-y += test_reciprocal_division_perf.c
 SRCS-y += test_fbarray.c
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 6deb97b..7db2df1 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -405,6 +405,12 @@
         "Report":  None,
     },
     {
+        "Name":    "Bitops test",
+        "Command": "bitops_autotest",
+        "Func":    default_autotest,
+        "Report":  None,
+    },
+    {
         "Name":    "Hash multiwriter autotest",
         "Command": "hash_multiwriter_autotest",
         "Func":    default_autotest,
diff --git a/app/test/meson.build b/app/test/meson.build
index fb49d80..ef340ca 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -14,6 +14,7 @@ test_sources = files('commands.c',
 	'test_atomic.c',
 	'test_barrier.c',
 	'test_bitratestats.c',
+	'test_bitops.c',
 	'test_bpf.c',
 	'test_byteorder.c',
 	'test_cmdline.c',
@@ -167,6 +168,7 @@ fast_test_names = [
         'alarm_autotest',
         'atomic_autotest',
         'byteorder_autotest',
+        'bitops_autotest',
         'cmdline_autotest',
         'common_autotest',
         'cpuflags_autotest',
diff --git a/app/test/test_bitops.c b/app/test/test_bitops.c
new file mode 100644
index 0000000..2a648aa
--- /dev/null
+++ b/app/test/test_bitops.c
@@ -0,0 +1,305 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2019 Arm Limited
+ */
+
+#include <rte_bitops.h>
+#include <rte_launch.h>
+#include "test.h"
+
+uint32_t val32;
+uint64_t val64;
+unsigned int synchro;
+unsigned int count32;
+unsigned int count64;
+
+#define MAX_BITS_32 32
+#define MAX_BITS_64 64
+/*
+ * Bitops functions
+ * ================
+ *
+ * - The main test function performs several subtests.
+ * - For relaxed version, check bit operations on one core.
+ *   - Initialize valXX to specified values, then set each bit of valXX
+ *     to 1 one by one in "test_bitops_set_relaxed".
+ *
+ *   - Clear each bit of valXX to 0 one by one in "test_bitops_clear_relaxed".
+ *
+ *   - Function "test_bitops_test_set_clear_relaxed" checks whether each bit
+ *     of valXX can do "test and set" and "test and clear" correctly.
+ *
+ * - For C11 atomic barrier version, check bit operations on multi cores.
+ *   - Per bit of valXX is set to 1, then cleared to 0 on each core in
+ *     "test_bitops_set_clear". The function checks that once all lcores finish
+ *     their set_clear, the value of valXX would still be zero.
+ *
+ *   - The cores are waiting for a synchro which is triggered by the main test
+ *     function. Then all cores would do "rte_test_and_set_bitXX" or
+ *     "rte_test_and_clear_bitXX" at the same time, "countXX" which is checked
+ *     as the result later would inc by one or not according to the original
+ *     bit value.
+ *
+ */
+
+static int
+test_bitops_set_relaxed(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		rte_set_bit32_relaxed(i, &val32);
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		if (!rte_get_bit32_relaxed(i, &val32)) {
+			printf("Failed to set bit in relaxed version.\n");
+			return TEST_FAILED;
+		}
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		rte_set_bit64_relaxed(i, &val64);
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		if (!rte_get_bit64_relaxed(i, &val64)) {
+			printf("Failed to set bit in relaxed version.\n");
+			return TEST_FAILED;
+		}
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_bitops_clear_relaxed(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		rte_clear_bit32_relaxed(i, &val32);
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		if (rte_get_bit32_relaxed(i, &val32)) {
+			printf("Failed to clear bit in relaxed version.\n");
+			return TEST_FAILED;
+		}
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		rte_clear_bit64_relaxed(i, &val64);
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		if (rte_get_bit64_relaxed(i, &val64)) {
+			printf("Failed to clear bit in relaxed version.\n");
+			return TEST_FAILED;
+		}
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_bitops_test_set_clear_relaxed(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		rte_test_and_set_bit32_relaxed(i, &val32);
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		if (!rte_test_and_clear_bit32_relaxed(i, &val32)) {
+			printf("Failed to set and test bit in relaxed version.\n");
+			return TEST_FAILED;
+	}
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		if (rte_get_bit32_relaxed(i, &val32)) {
+			printf("Failed to test and clear bit in relaxed version.\n");
+			return TEST_FAILED;
+		}
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		rte_test_and_set_bit64_relaxed(i, &val64);
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		if (!rte_test_and_clear_bit64_relaxed(i, &val64)) {
+			printf("Failed to set and test bit in relaxed version.\n");
+			return TEST_FAILED;
+		}
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		if (rte_get_bit64_relaxed(i, &val64)) {
+			printf("Failed to test and clear bit in relaxed version.\n");
+			return TEST_FAILED;
+		}
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_bitops_set_clear(__attribute__((unused)) void *arg)
+{
+	while (__atomic_load_n(&synchro, __ATOMIC_RELAXED) == 0)
+		;
+
+	unsigned int i;
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		rte_set_bit32(i, &val32);
+	for (i = 0; i < MAX_BITS_32; i++)
+		rte_clear_bit32(i, &val32);
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		rte_set_bit64(i, &val64);
+	for (i = 0; i < MAX_BITS_64; i++)
+		rte_clear_bit64(i, &val64);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * rte_test_and_set_bitXX() returns the original bit value, then set it to 1.
+ * This functions checks that if the target bit is equal to 0, set it to 1 and
+ * increase the variable of "countXX" by one. If it is equal to 1, do nothing
+ * for "countXX". The value of "countXX" would be checked as the result later.
+ */
+static int
+test_bitops_test_set(__attribute__((unused)) void *arg)
+
+{
+	while (__atomic_load_n(&synchro, __ATOMIC_RELAXED) == 0)
+		;
+
+	unsigned int i;
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		if (!rte_test_and_set_bit32(i, &val32))
+			__atomic_fetch_add(&count32, 1, __ATOMIC_ACQ_REL);
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		if (!rte_test_and_set_bit64(i, &val64))
+			__atomic_fetch_add(&count64, 1, __ATOMIC_ACQ_REL);
+
+	return TEST_SUCCESS;
+}
+
+/*
+ * rte_test_and_set_bitXX() returns the original bit value, then clear it to 0.
+ * This functions checks that if the target bit is equal to 1, clear it to 0 and
+ * increase the variable of "countXX" by one. If it is equal to 0, do nothing
+ * for "countXX". The value of "countXX" would be checked as the result later.
+ */
+static int
+test_bitops_test_clear(__attribute__((unused)) void *arg)
+
+{
+	while (__atomic_load_n(&synchro, __ATOMIC_RELAXED) == 0)
+		;
+
+	unsigned int i;
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		if (rte_test_and_clear_bit32(i, &val32))
+			__atomic_fetch_add(&count32, 1, __ATOMIC_ACQ_REL);
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		if (rte_test_and_clear_bit64(i, &val64))
+			__atomic_fetch_add(&count64, 1, __ATOMIC_ACQ_REL);
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_bitops(void)
+{
+	__atomic_store_n(&val32, 0, __ATOMIC_RELAXED);
+	__atomic_store_n(&val64, 0, __ATOMIC_RELAXED);
+	__atomic_store_n(&synchro, 0,  __ATOMIC_RELAXED);
+	__atomic_store_n(&count32, 0, __ATOMIC_RELAXED);
+	__atomic_store_n(&count64, 0, __ATOMIC_RELAXED);
+
+	if (test_bitops_set_relaxed() < 0)
+		return TEST_FAILED;
+
+	if (test_bitops_clear_relaxed() < 0)
+		return TEST_FAILED;
+
+	if (test_bitops_test_set_clear_relaxed() < 0)
+		return TEST_FAILED;
+
+
+	rte_eal_mp_remote_launch(test_bitops_set_clear, NULL, SKIP_MASTER);
+	__atomic_store_n(&synchro, 1,  __ATOMIC_RELAXED);
+	rte_eal_mp_wait_lcore();
+	__atomic_store_n(&synchro, 0, __ATOMIC_RELAXED);
+
+	unsigned int i;
+
+	for (i = 0; i < MAX_BITS_32; i++)
+		if (rte_get_bit32(i, &val32)) {
+			printf("Failed to set and clear bit on multi cores.\n");
+			return TEST_FAILED;
+		}
+
+	for (i = 0; i < MAX_BITS_64; i++)
+		if (rte_get_bit64(i, &val64)) {
+			printf("Failed to set and clear bit on multi cores.\n");
+			return TEST_FAILED;
+		}
+
+	/*
+	 * Launch all slave lcores to do "rte_bitops_test_and_set_bitXX"
+	 * respectively.
+	 * Each lcore should have MAX_BITS_XX chances to check the target bit.
+	 * If it's equal to 0, set it to 1 and "countXX (which is initialized
+	 * to 0)" would be increased by one. If the target bit is 1, still set
+	 * it to 1 and do nothing for "countXX". There would be only one lcore
+	 * that finds the target bit is 0.
+	 * If the final value of "countXX" is equal to MAX_BITS_XX, all slave
+	 * lcores performed "rte_bitops_test_and_set_bitXX" correctly.
+	 */
+	__atomic_store_n(&count32, 0, __ATOMIC_RELAXED);
+	__atomic_store_n(&count64, 0, __ATOMIC_RELAXED);
+
+	rte_eal_mp_remote_launch(test_bitops_test_set, NULL, SKIP_MASTER);
+	__atomic_store_n(&synchro, 1,  __ATOMIC_RELAXED);
+	rte_eal_mp_wait_lcore();
+	__atomic_store_n(&synchro, 0, __ATOMIC_RELAXED);
+
+	if (__atomic_load_n(&count32, __ATOMIC_RELAXED) != MAX_BITS_32) {
+		printf("Failed to test and set on multi cores.\n");
+		return TEST_FAILED;
+	}
+	if (__atomic_load_n(&count64, __ATOMIC_RELAXED) != MAX_BITS_64) {
+		printf("Failed to test and set on multi cores.\n");
+		return TEST_FAILED;
+	}
+
+	/*
+	 * Launch all slave lcores to do "rte_bitops_test_and_clear_bitXX"
+	 * respectively.
+	 * Each lcore should have MAX_BITS_XX chances to check the target bit.
+	 * If it's equal to 1, clear it to 0 and "countXX (which is initialized
+	 * to 0)" would be increased by one. If the target bit is 0, still clear
+	 * it to 0 and do nothing for "countXX". There would be only one lcore
+	 * that finds the target bit is 1.
+	 * If the final value of "countXX" is equal to MAX_BITS_XX, all slave
+	 * lcores performed "rte_bitops_test_and_clear_bitXX" correctly.
+	 */
+
+	__atomic_store_n(&count32, 0, __ATOMIC_RELAXED);
+	__atomic_store_n(&count64, 0, __ATOMIC_RELAXED);
+
+	rte_eal_mp_remote_launch(test_bitops_test_clear, NULL, SKIP_MASTER);
+	__atomic_store_n(&synchro, 1,  __ATOMIC_RELAXED);
+	rte_eal_mp_wait_lcore();
+	__atomic_store_n(&synchro, 0, __ATOMIC_RELAXED);
+
+	if (__atomic_load_n(&count32, __ATOMIC_RELAXED) != MAX_BITS_32) {
+		printf("Failed to test and clear on multi cores.\n");
+		return TEST_FAILED;
+	}
+	if (__atomic_load_n(&count64, __ATOMIC_RELAXED) != MAX_BITS_64) {
+		printf("Failed to test and clear on multi cores.\n");
+		return TEST_FAILED;
+	}
+
+	return TEST_SUCCESS;
+}
+
+REGISTER_TEST_COMMAND(bitops_autotest, test_bitops);
-- 
2.7.4



More information about the dev mailing list