[dpdk-dev] [PATCH 07/30] ipsec: fix spelling errors
Stephen Hemminger
stephen at networkplumber.org
Mon Jul 1 20:25:13 CEST 2019
Spelling error found by codespell
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
---
examples/ipsec-secgw/parser.c | 2 +-
examples/ipsec-secgw/test/linux_test4.sh | 4 ++--
examples/ipsec-secgw/test/linux_test6.sh | 4 ++--
lib/librte_ipsec/esp_inb.c | 2 +-
lib/librte_ipsec/sa.c | 2 +-
lib/librte_ipsec/sa.h | 4 ++--
6 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/examples/ipsec-secgw/parser.c b/examples/ipsec-secgw/parser.c
index fc8c238fe5a5..6dd3081ffcf4 100644
--- a/examples/ipsec-secgw/parser.c
+++ b/examples/ipsec-secgw/parser.c
@@ -506,7 +506,7 @@ cfg_parse_neigh(void *parsed_result, __rte_unused struct cmdline *cl,
rc = parse_mac(res->mac, &mac);
APP_CHECK(rc == 0, st, "invalid ether addr:%s", res->mac);
rc = add_dst_ethaddr(res->port, &mac);
- APP_CHECK(rc == 0, st, "invalid port numer:%hu", res->port);
+ APP_CHECK(rc == 0, st, "invalid port number:%hu", res->port);
if (st->status < 0)
return;
}
diff --git a/examples/ipsec-secgw/test/linux_test4.sh b/examples/ipsec-secgw/test/linux_test4.sh
index d636f560482d..01a2bea4050d 100644
--- a/examples/ipsec-secgw/test/linux_test4.sh
+++ b/examples/ipsec-secgw/test/linux_test4.sh
@@ -5,7 +5,7 @@
# ipsec-secgw (IPv4 mode) functional test script.
#
# Note that for most of them you required appropriate crypto PMD/device
-# to be avaialble.
+# to be available.
# Also user has to setup properly the following environment variables:
# SGW_PATH - path to the ipsec-secgw binary to test
# REMOTE_HOST - ip/hostname of the DUT
@@ -33,7 +33,7 @@
# I.E:
# DUT OS(NIC1)--(ipsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS
# SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(ipsec)-->(NIC1)DUT OS
-# Then tries to perorm some data transfer using the scheme decribed above.
+# Then tries to perform some data transfer using the scheme described above.
#
DIR=`dirname $0`
diff --git a/examples/ipsec-secgw/test/linux_test6.sh b/examples/ipsec-secgw/test/linux_test6.sh
index e30f607d8c1b..66655006a336 100644
--- a/examples/ipsec-secgw/test/linux_test6.sh
+++ b/examples/ipsec-secgw/test/linux_test6.sh
@@ -5,7 +5,7 @@
# ipsec-secgw (IPv6 mode) functional test script.
#
# Note that for most of them you required appropriate crypto PMD/device
-# to be avaialble.
+# to be available.
# Also user has to setup properly the following environment variables:
# SGW_PATH - path to the ipsec-secgw binary to test
# REMOTE_HOST - ip/hostname of the DUT
@@ -34,7 +34,7 @@
# I.E:
# DUT OS(NIC1)--(ipsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS
# SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(ipsec)-->(NIC1)DUT OS
-# Then tries to perorm some data transfer using the scheme decribed above.
+# Then tries to perform some data transfer using the scheme described above.
#
DIR=`dirname $0`
diff --git a/lib/librte_ipsec/esp_inb.c b/lib/librte_ipsec/esp_inb.c
index 3e12ca1030f0..7f296cd247dd 100644
--- a/lib/librte_ipsec/esp_inb.c
+++ b/lib/librte_ipsec/esp_inb.c
@@ -359,7 +359,7 @@ trs_process_step3(struct rte_mbuf *mb)
static inline void
tun_process_step3(struct rte_mbuf *mb, uint64_t txof_msk, uint64_t txof_val)
{
- /* reset mbuf metatdata: L2/L3 len, packet type */
+ /* reset mbuf metadata: L2/L3 len, packet type */
mb->packet_type = RTE_PTYPE_UNKNOWN;
mb->tx_offload = (mb->tx_offload & txof_msk) | txof_val;
diff --git a/lib/librte_ipsec/sa.c b/lib/librte_ipsec/sa.c
index 81e3437bb5e4..cede034bb8af 100644
--- a/lib/librte_ipsec/sa.c
+++ b/lib/librte_ipsec/sa.c
@@ -126,7 +126,7 @@ ipsec_sa_size(uint64_t type, uint32_t *wnd_sz, uint32_t *nb_bucket)
/*
* RFC 4303 recommends 64 as minimum window size.
* there is no point to use ESN mode without SQN window,
- * so make sure we have at least 64 window when ESN is enalbed.
+ * so make sure we have at least 64 window when ESN is enabled.
*/
wsz = ((type & RTE_IPSEC_SATP_ESN_MASK) ==
RTE_IPSEC_SATP_ESN_DISABLE) ?
diff --git a/lib/librte_ipsec/sa.h b/lib/librte_ipsec/sa.h
index ffb5fb4f8c32..b142e61d65a4 100644
--- a/lib/librte_ipsec/sa.h
+++ b/lib/librte_ipsec/sa.h
@@ -111,8 +111,8 @@ struct rte_ipsec_sa {
* sqn and replay window
* In case of SA handled by multiple threads *sqn* cacheline
* could be shared by multiple cores.
- * To minimise perfomance impact, we try to locate in a separate
- * place from other frequently accesed data.
+ * To minimize performance impact, we try to locate in a separate
+ * place from other frequently accessed data.
*/
union {
union {
--
2.20.1
More information about the dev
mailing list