[dpdk-dev] [PATCH 27/30] test-pmd: fix spelling errors
Stephen Hemminger
stephen at networkplumber.org
Mon Jul 1 20:25:33 CEST 2019
Multiple spelling problems found by codespell.
Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
---
app/test-pmd/cmdline.c | 11 ++++++-----
app/test-pmd/config.c | 4 ++--
app/test-pmd/csumonly.c | 2 +-
app/test-pmd/softnicfwd.c | 2 +-
4 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index d1e0d4402c94..85db61e0033c 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -100,7 +100,7 @@ static void cmd_help_brief_parsed(__attribute__((unused)) void *parsed_result,
" help ports : Configuring ports.\n"
" help registers : Reading and setting port registers.\n"
" help filters : Filters configuration help.\n"
- " help traffic_management : Traffic Management commmands.\n"
+ " help traffic_management : Traffic Management commands.\n"
" help all : All of the above sections.\n\n"
);
@@ -3503,7 +3503,7 @@ parse_item_list(char* str, const char* item_name, unsigned int max_items,
return nb_item;
/*
- * Then, check that all values in the list are differents.
+ * Then, check that all values in the list are different.
* No optimization here...
*/
for (i = 0; i < nb_item; i++) {
@@ -5010,7 +5010,7 @@ cmd_gso_size_parsed(void *parsed_result,
if (test_done == 0) {
printf("Before setting GSO segsz, please first"
- " stop fowarding\n");
+ " stop forwarding\n");
return;
}
@@ -6942,7 +6942,7 @@ cmd_link_flow_ctrl_set_parsed(void *parsed_result,
ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
if (ret != 0)
- printf("bad flow contrl parameter, return code = %d \n", ret);
+ printf("bad flow control parameter, return code = %d\n", ret);
}
/* *** SETUP ETHERNET PRIORITY FLOW CONTROL *** */
@@ -6990,7 +6990,8 @@ cmd_priority_flow_ctrl_set_parsed(void *parsed_result,
ret = rte_eth_dev_priority_flow_ctrl_set(res->port_id, &pfc_conf);
if (ret != 0)
- printf("bad priority flow contrl parameter, return code = %d \n", ret);
+ printf("bad priority flow control parameter, return code = %d\n",
+ ret);
}
cmdline_parse_token_string_t cmd_pfc_set_set =
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index ab458c8d2837..5ab71d1eaf45 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1745,7 +1745,7 @@ port_rss_reta_info(portid_t port_id,
}
/*
- * Displays the RSS hash functions of a port, and, optionaly, the RSS hash
+ * Displays the RSS hash functions of a port, and, optionally, the RSS hash
* key of the port.
*/
void
@@ -3492,7 +3492,7 @@ mcast_addr_pool_remove(struct rte_port *port, uint32_t addr_idx)
{
port->mc_addr_nb--;
if (addr_idx == port->mc_addr_nb) {
- /* No need to recompact the set of multicast addressses. */
+ /* No need to recompact the set of multicast addresses. */
if (port->mc_addr_nb == 0) {
/* free the pool of multicast addresses. */
free(port->mc_addr_pool);
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index e1cb7fb708b7..1ec2d8f62712 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -685,7 +685,7 @@ pkt_copy_split(const struct rte_mbuf *pkt)
*
* The testpmd command line for this forward engine sets the flags
* TESTPMD_TX_OFFLOAD_* in ports[tx_port].tx_ol_flags. They control
- * wether a checksum must be calculated in software or in hardware. The
+ * whether a checksum must be calculated in software or in hardware. The
* IP, UDP, TCP and SCTP flags always concern the inner layer. The
* OUTER_IP is only useful for tunnel packets.
*/
diff --git a/app/test-pmd/softnicfwd.c b/app/test-pmd/softnicfwd.c
index 94e6669d3852..1890ab96938b 100644
--- a/app/test-pmd/softnicfwd.c
+++ b/app/test-pmd/softnicfwd.c
@@ -277,7 +277,7 @@ softport_tm_subport_node_add(portid_t port_id,
snp.nonleaf.n_sp_priorities = 1;
snp.stats_mask = STATS_MASK_DEFAULT;
- /* Add Node to TM Hiearchy */
+ /* Add Node to TM Hierarchy */
if (rte_tm_node_add(port_id,
h->subport_node_id[i],
subport_parent_node_id,
--
2.20.1
More information about the dev
mailing list