[dpdk-dev] [PATCH v9 1/3] ethdev: add actions to modify TCP header fields

[Dekel Peled]

Thanks, PSB

> -----Original Message-----
> From: Andrew Rybchenko <arybchenko at solarflare.com>
> Sent: Tuesday, July 2, 2019 11:14 AM
> To: Dekel Peled <dekelp at mellanox.com>; Adrien Mazarguil
> <adrien.mazarguil at 6wind.com>; wenzhuo.lu at intel.com;
> jingjing.wu at intel.com; bernard.iremonger at intel.com; Yongseok Koh
> <yskoh at mellanox.com>; Shahaf Shuler <shahafs at mellanox.com>; Slava
> Ovsiienko <viacheslavo at mellanox.com>; arybchenko at solarflare.com
> Cc: dev at dpdk.org; Ori Kam <orika at mellanox.com>
> Subject: Re: [dpdk-dev] [PATCH v9 1/3] ethdev: add actions to modify TCP
> header fields
> 
> On 01.07.2019 18:43, Dekel Peled wrote:
> > Add actions:
> > - INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
> > - DEC_TCP_SEQ - Decrease sequence number in the outermost TCP
> header.
> > - INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
> > 		header.
> > - DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
> > 		header.
> >
> > Original work by Xiaoyu Min.
> >
> > This patch uses the new approach introduced by [1], using a simple
> > integer instead of using an action-specific structure for each of the
> > new actions.
> >
> > [1]
> >
> https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch
> >
> es.dpdk.org%2Fpatch%2F55773%2F&data=02%7C01%7Cdekelp%40mell
> anox.co
> >
> m%7Cae3a2667c3a243a9c1e508d6fec54a22%7Ca652971c7d2e4d9ba6a4d1492
> 56f461
> >
> b%7C0%7C0%7C636976520663069258&sdata=1z3uDQGnnyPZH9NAUuY5
> 0ZSg3smyZ
> > nDmc3QZtuNTmyg%3D&reserved=0
> >
> > Signed-off-by: Dekel Peled <dekelp at mellanox.com>
> > Acked-by: Andrew Rybchenko <arybchenko at solarflare.com>
> > ---
> >   doc/guides/prog_guide/rte_flow.rst | 32
> ++++++++++++++++++++++++++++++++
> >   lib/librte_ethdev/rte_flow.c       |  4 ++++
> >   lib/librte_ethdev/rte_flow.h       | 32
> ++++++++++++++++++++++++++++++++
> >   3 files changed, 68 insertions(+)
> >
> > diff --git a/doc/guides/prog_guide/rte_flow.rst
> > b/doc/guides/prog_guide/rte_flow.rst
> > index 67deed7..bbe32db 100644
> > --- a/doc/guides/prog_guide/rte_flow.rst
> > +++ b/doc/guides/prog_guide/rte_flow.rst
> > @@ -2346,6 +2346,38 @@ Otherwise, RTE_FLOW_ERROR_TYPE_ACTION
> error will be returned.
> >      | ``mac_addr`` | MAC address   |
> >      +--------------+---------------+
> >
> > +Action: ``INC_TCP_SEQ``
> > +^^^^^^^^^^^^^^^^^^^^^^^
> > +
> > +Increase sequence number in the outermost TCP header.
> > +Value to increase TCP sequence number by is a big-endian 32 bit integer.
> > +
> > +Using this action on non-matching traffic will result in undefined behavior.
> > +
> > +Action: ``DEC_TCP_SEQ``
> > +^^^^^^^^^^^^^^^^^^^^^^^
> > +
> > +Decrease sequence number in the outermost TCP header.
> > +Value to decrease TCP sequence number by is a big-endian 32 bit integer.
> > +
> > +Using this action on non-matching traffic will result in undefined behavior.
> > +
> > +Action: ``INC_TCP_ACK``
> > +^^^^^^^^^^^^^^^^^^^^^^^
> > +
> > +Increase acknowledgment number in the outermost TCP header.
> > +Value to increase TCP acknowledgment number by is a big-endian 32 bit
> integer.
> > +
> > +Using this action on non-matching traffic will result in undefined behavior.
> > +
> > +Action: ``DEC_TCP_ACK``
> > +^^^^^^^^^^^^^^^^^^^^^^^
> > +
> > +Decrease acknowledgment number in the outermost TCP header.
> > +Value to decrease TCP acknowledgment number by is a big-endian 32 bit
> integer.
> > +
> > +Using this action on non-matching traffic will result in undefined behavior.
> > +
> >   Negative types
> >   ~~~~~~~~~~~~~~
> >
> > diff --git a/lib/librte_ethdev/rte_flow.c
> > b/lib/librte_ethdev/rte_flow.c index 3277be1..0c9f6c6 100644
> > --- a/lib/librte_ethdev/rte_flow.c
> > +++ b/lib/librte_ethdev/rte_flow.c
> > @@ -143,6 +143,10 @@ struct rte_flow_desc_data {
> >   	MK_FLOW_ACTION(SET_TTL, sizeof(struct rte_flow_action_set_ttl)),
> >   	MK_FLOW_ACTION(SET_MAC_SRC, sizeof(struct
> rte_flow_action_set_mac)),
> >   	MK_FLOW_ACTION(SET_MAC_DST, sizeof(struct
> > rte_flow_action_set_mac)),
> > +	MK_FLOW_ACTION(INC_TCP_SEQ, sizeof(rte_be32_t)),
> > +	MK_FLOW_ACTION(DEC_TCP_SEQ, sizeof(rte_be32_t)),
> > +	MK_FLOW_ACTION(INC_TCP_ACK, sizeof(rte_be32_t)),
> > +	MK_FLOW_ACTION(DEC_TCP_ACK, sizeof(rte_be32_t)),
> >   };
> >
> >   static int
> > diff --git a/lib/librte_ethdev/rte_flow.h
> > b/lib/librte_ethdev/rte_flow.h index 2232856..28445f4 100644
> > --- a/lib/librte_ethdev/rte_flow.h
> > +++ b/lib/librte_ethdev/rte_flow.h
> > @@ -1651,6 +1651,38 @@ enum rte_flow_action_type {
> >   	 * See struct rte_flow_action_set_mac.
> >   	 */
> >   	RTE_FLOW_ACTION_TYPE_SET_MAC_DST,
> > +
> > +	/**
> > +	 * Increase sequence number in the outermost TCP header.
> > +	 *
> > +	 * Using this action on non-matching traffic will result in
> > +	 * undefined behavior.
> > +	 */
> > +	RTE_FLOW_ACTION_TYPE_INC_TCP_SEQ,
> > +
> > +	/**
> > +	 * Decrease sequence number in the outermost TCP header.
> > +	 *
> > +	 * Using this action on non-matching traffic will result in
> > +	 * undefined behavior.
> > +	 */
> > +	RTE_FLOW_ACTION_TYPE_DEC_TCP_SEQ,
> > +
> > +	/**
> > +	 * Increase acknowledgment number in the outermost TCP header.
> > +	 *
> > +	 * Using this action on non-matching traffic will result in
> > +	 * undefined behavior.
> > +	 */
> > +	RTE_FLOW_ACTION_TYPE_INC_TCP_ACK,
> > +
> > +	/**
> > +	 * Decrease acknowledgment number in the outermost TCP header.
> > +	 *
> > +	 * Using this action on non-matching traffic will result in
> > +	 * undefined behavior.
> > +	 */
> > +	RTE_FLOW_ACTION_TYPE_DEC_TCP_ACK,
> >   };
> >
> >   /**
> 
> Other actions have type of configuration data description in a comment just
> before the action enum element. I'm not sure why it is skipped here.
> It is really vital information.
> 

I had the relevant struct name here, and removed it when I changed it to integer.
In the documentation doc/guides/prog_guide/rte_flow.rst  I added description, please see above.