[dpdk-dev] [PATCH v3 1/3] ethdev: add NSH key field to flow API

kirankumark at marvell.com kirankumark at marvell.com
Thu Jul 25 11:03:43 CEST 2019


From: Kiran Kumar K <kirankumark at marvell.com>

Add new rte_flow_item_nsh in order to match the network service header
based on RFC 8300.

Signed-off-by: Kiran Kumar K <kirankumark at marvell.com>
---
V3 changes:
* Fixed checkpatch issue

V2 changes:
* updated supported items in doc

 doc/guides/prog_guide/rte_flow.rst | 18 ++++++++++++++
 lib/librte_ethdev/rte_flow.c       |  1 +
 lib/librte_ethdev/rte_flow.h       | 39 ++++++++++++++++++++++++++++++
 3 files changed, 58 insertions(+)

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 821b524b3..4109f199a 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1219,6 +1219,24 @@ Matches an application specific 32 bit metadata item.
    | ``mask`` | ``data`` | bit-mask applies to "spec" and "last" |
    +----------+----------+---------------------------------------+

+Item: ``NSH``
+^^^^^^^^^^^^^^^^^^^
+
+Matches a network service header (RFC 8300).
+
+- ``version``: normally 0x0 (2 bits).
+- ``oam_pkt``: indicate oam packet (1 bit).
+- ``reserved``: reserved bit (1 bit).
+- ``ttl``: maximum SFF hopes (6 bits).
+- ``length``: total length in 4 bytes words (6 bits).
+- ``reserved1``: reserved1 bits (4 bits).
+- ``mdtype``: ndicates format of NSH header (4 bits).
+- ``next_proto``: indicates protocol type of encap data (8 bits).
+- ``spi``: service path identifier (3 bytes).
+- ``sindex``: service index (1 byte).
+- Default ``mask`` matches mdtype, next_proto, spi, sindex.
+
+
 Actions
 ~~~~~~~

diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index 18fcb018e..39646167c 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -75,6 +75,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(MARK, sizeof(struct rte_flow_item_mark)),
 	MK_FLOW_ITEM(META, sizeof(struct rte_flow_item_meta)),
 	MK_FLOW_ITEM(GRE_KEY, sizeof(rte_be32_t)),
+	MK_FLOW_ITEM(NSH, sizeof(struct rte_flow_item_nsh)),
 };

 /** Generate flow_action[] entry. */
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index b66bf1495..f0e99fa3e 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -434,6 +434,13 @@ enum rte_flow_item_type {
 	 * @code rte_be32_t * @endcode
 	 */
 	RTE_FLOW_ITEM_TYPE_GRE_KEY,
+
+	/**
+	 * Matches Network service header (NSH).
+	 * See struct rte_flow_item_nsh.
+	 *
+	 */
+	RTE_FLOW_ITEM_TYPE_NSH,
 };

 /**
@@ -1214,6 +1221,38 @@ struct rte_flow_item_mark {
 	uint32_t id; /**< Integer value to match against. */
 };

+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_NSH
+ *
+ * Match network service header (NSH), RFC 8300
+ *
+ */
+struct rte_flow_item_nsh {
+	uint32_t version:2;
+	uint32_t oam_pkt:1;
+	uint32_t reserved:1;
+	uint32_t ttl:6;
+	uint32_t length:6;
+	uint32_t reserved1:4;
+	uint32_t mdtype:4;
+	uint32_t next_proto:8;
+	uint32_t spi:24;
+	uint32_t sindex:8;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_NSH. */
+#ifndef __cplusplus
+static const struct rte_flow_item_nsh rte_flow_item_nsh_mask = {
+	.mdtype = 0xf,
+	.next_proto = 0xff,
+	.spi = 0xffffff,
+	.sindex = 0xff,
+};
+#endif
+
 /**
  * Matching pattern item definition.
  *
--
2.17.1



More information about the dev mailing list