[dpdk-dev] [PATCH v3] devtools: better freebsd support
David Marchand
david.marchand at redhat.com
Mon Jul 29 10:36:23 CEST 2019
On Mon, Jul 29, 2019 at 10:31 AM David Marchand
<david.marchand at redhat.com> wrote:
>
> On Thu, Jul 11, 2019 at 4:25 PM Olivier Matz <olivier.matz at 6wind.com> wrote:
> >
> > - As "readlink -e" and "readlink -m" do not exist on freebsd,
> > use "readlink -f", it should not have any impact in these cases.
> > - "sed -ri" is invalid on freebsd and should be replaced by
> > "sed -ri=''"
> > - Use gmake instead of make.
> >
> > This fixes the following command:
> > SYSDIR=/usr/src/sys ./devtools/test-build.sh \
> > -j4 x86_64-native-freebsd-gcc
> >
> > Signed-off-by: Olivier Matz <olivier.matz at 6wind.com>
> > ---
> >
> > v3:
> > - fix examples installation path, pointed-out by Flavia
> >
> > v2:
> > - remove sed_ri() function and use 'sed -ri=""' as suggested by Bruce
> >
> > devtools/check-dup-includes.sh | 2 +-
> > devtools/checkpatches.sh | 8 ++--
> > devtools/get-maintainer.sh | 2 +-
> > devtools/load-devel-config | 4 +-
> > devtools/test-build.sh | 94 ++++++++++++++++++++++--------------------
> > devtools/validate-abi.sh | 2 +-
> > 6 files changed, 58 insertions(+), 54 deletions(-)
> >
> > diff --git a/devtools/check-dup-includes.sh b/devtools/check-dup-includes.sh
> > index e4c2748c6..591599949 100755
> > --- a/devtools/check-dup-includes.sh
> > +++ b/devtools/check-dup-includes.sh
> > @@ -5,7 +5,7 @@
> > # Check C files in git repository for duplicated includes.
> > # Usage: devtools/check-dup-includes.sh [directory]
> >
> > -dir=${1:-$(dirname $(readlink -m $0))/..}
> > +dir=${1:-$(dirname $(readlink -f $0))/..}
> > cd $dir
> >
> > # speed up by ignoring Unicode details
> > diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
> > index 560e6ce93..8e2beee16 100755
> > --- a/devtools/checkpatches.sh
> > +++ b/devtools/checkpatches.sh
> > @@ -7,9 +7,9 @@
> > # - DPDK_CHECKPATCH_CODESPELL
> > # - DPDK_CHECKPATCH_LINE_LENGTH
> > # - DPDK_CHECKPATCH_OPTIONS
> > -. $(dirname $(readlink -e $0))/load-devel-config
> > +. $(dirname $(readlink -f $0))/load-devel-config
> >
> > -VALIDATE_NEW_API=$(dirname $(readlink -e $0))/check-symbol-change.sh
> > +VALIDATE_NEW_API=$(dirname $(readlink -f $0))/check-symbol-change.sh
> >
> > # Enable codespell by default. This can be overwritten from a config file.
> > # Codespell can also be enabled by setting DPDK_CHECKPATCH_CODESPELL to a valid path
> > @@ -66,7 +66,7 @@ check_forbidden_additions() { # <patch>
> > -v EXPRESSIONS="rte_panic\\\( rte_exit\\\(" \
> > -v RET_ON_FAIL=1 \
> > -v MESSAGE='Using rte_panic/rte_exit' \
> > - -f $(dirname $(readlink -e $0))/check-forbidden-tokens.awk \
> > + -f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
> > "$1" || res=1
> >
> > # svg figures must be included with wildcard extension
> > @@ -75,7 +75,7 @@ check_forbidden_additions() { # <patch>
> > -v EXPRESSIONS='::[[:space:]]*[^[:space:]]*\\.svg' \
> > -v RET_ON_FAIL=1 \
> > -v MESSAGE='Using explicit .svg extension instead of .*' \
> > - -f $(dirname $(readlink -e $0))/check-forbidden-tokens.awk \
> > + -f $(dirname $(readlink -f $0))/check-forbidden-tokens.awk \
> > "$1" || res=1
> >
> > return $res
> > diff --git a/devtools/get-maintainer.sh b/devtools/get-maintainer.sh
> > index b9160486a..85740f5af 100755
> > --- a/devtools/get-maintainer.sh
> > +++ b/devtools/get-maintainer.sh
> > @@ -5,7 +5,7 @@
> >
> > # Load config options:
> > # - DPDK_GETMAINTAINER_PATH
> > -. $(dirname $(readlink -e $0))/load-devel-config
> > +. $(dirname $(readlink -f $0))/load-devel-config
> >
> > options="--no-git-fallback"
> > options="$options --no-rolestats"
> > diff --git a/devtools/load-devel-config b/devtools/load-devel-config
> > index 4f43cb352..380c79db4 100644
> > --- a/devtools/load-devel-config
> > +++ b/devtools/load-devel-config
> > @@ -6,7 +6,7 @@ test ! -r /etc/dpdk/devel.config ||
> > test ! -r ~/.config/dpdk/devel.config ||
> > . ~/.config/dpdk/devel.config
> > # from local file
> > -test ! -r $(dirname $(readlink -m $0))/../.develconfig ||
> > - . $(dirname $(readlink -m $0))/../.develconfig
> > +test ! -r $(dirname $(readlink -f $0))/../.develconfig ||
> > + . $(dirname $(readlink -f $0))/../.develconfig
> >
> > # The config files must export variables in the shell style
> > diff --git a/devtools/test-build.sh b/devtools/test-build.sh
> > index 9b50bf73d..3c029ce31 100755
> > --- a/devtools/test-build.sh
> > +++ b/devtools/test-build.sh
> > @@ -28,7 +28,7 @@ default_path=$PATH
> > # - LIBSSO_SNOW3G_PATH
> > # - LIBSSO_KASUMI_PATH
> > # - LIBSSO_ZUC_PATH
> > -. $(dirname $(readlink -e $0))/load-devel-config
> > +. $(dirname $(readlink -f $0))/load-devel-config
> >
> > print_usage () {
> > echo "usage: $(basename $0) [-h] [-jX] [-s] [config1 [config2] ...]]"
> > @@ -57,6 +57,10 @@ print_help () {
> > END_OF_HELP
> > }
> >
> > +[ -z $MAKE ] && command -v gmake > /dev/null && MAKE=gmake
> > +[ -z $MAKE ] && command -v make > /dev/null && MAKE=make
> > +[ -z $MAKE ] && echo "Cannot find make or gmake" && exit 1
> > +
> > J=$DPDK_MAKE_JOBS
> > short=false
> > unset verbose
> > @@ -90,7 +94,7 @@ trap "signal=INT ; trap - INT ; kill -INT $$" INT
> > # notify result on exit
> > trap on_exit EXIT
> >
> > -cd $(dirname $(readlink -m $0))/..
> > +cd $(dirname $(readlink -f $0))/..
> >
> > reset_env ()
> > {
> > @@ -127,83 +131,83 @@ config () # <directory> <target> <options>
> > fi
> > if [ ! -e $1/.config ] || $reconfig ; then
> > echo "================== Configure $1"
> > - make T=$2 O=$1 config
> > + ${MAKE} T=$2 O=$1 config
> >
> > echo 'Customize configuration'
> > # Built-in options (lowercase)
> > ! echo $3 | grep -q '+default' || \
> > - sed -ri 's,(RTE_MACHINE=")native,\1default,' $1/.config
> > + sed -ri="" 's,(RTE_MACHINE=")native,\1default,' $1/.config
> > echo $3 | grep -q '+next' || \
> > - sed -ri 's,(NEXT_ABI=)y,\1n,' $1/.config
> > + sed -ri="" 's,(NEXT_ABI=)y,\1n,' $1/.config
> > ! echo $3 | grep -q '+shared' || \
> > - sed -ri 's,(SHARED_LIB=)n,\1y,' $1/.config
> > + sed -ri="" 's,(SHARED_LIB=)n,\1y,' $1/.config
> > ! echo $3 | grep -q '+debug' || ( \
> > - sed -ri 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
> > - sed -ri 's,(_DEBUG.*=)n,\1y,' $1/.config
> > - sed -ri 's,(_STAT.*=)n,\1y,' $1/.config
> > - sed -ri 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
> > + sed -ri="" 's,(RTE_LOG_DP_LEVEL=).*,\1RTE_LOG_DEBUG,' $1/.config
> > + sed -ri="" 's,(_DEBUG.*=)n,\1y,' $1/.config
> > + sed -ri="" 's,(_STAT.*=)n,\1y,' $1/.config
> > + sed -ri="" 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
> >
> > # Automatic configuration
> > test "$DPDK_DEP_NUMA" != n || \
> > - sed -ri 's,(NUMA.*=)y,\1n,' $1/.config
> > - sed -ri 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
> > - sed -ri 's,(BYPASS=)n,\1y,' $1/.config
> > + sed -ri="" 's,(NUMA.*=)y,\1n,' $1/.config
> > + sed -ri="" 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
> > + sed -ri="" 's,(BYPASS=)n,\1y,' $1/.config
> > test "$DPDK_DEP_ARCHIVE" != y || \
> > - sed -ri 's,(RESOURCE_TAR=)n,\1y,' $1/.config
> > + sed -ri="" 's,(RESOURCE_TAR=)n,\1y,' $1/.config
> > test "$DPDK_DEP_ISAL" != y || \
> > - sed -ri 's,(PMD_ISAL=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_ISAL=)n,\1y,' $1/.config
> > test "$DPDK_DEP_MLX" != y || \
> > - sed -ri 's,(MLX._PMD=)n,\1y,' $1/.config
> > + sed -ri="" 's,(MLX._PMD=)n,\1y,' $1/.config
> > test "$DPDK_DEP_SZE" != y || \
> > - sed -ri 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
> > test "$DPDK_DEP_ZLIB" != y || \
> > - sed -ri 's,(BNX2X_PMD=)n,\1y,' $1/.config
> > + sed -ri="" 's,(BNX2X_PMD=)n,\1y,' $1/.config
> > test "$DPDK_DEP_ZLIB" != y || \
> > - sed -ri 's,(PMD_ZLIB=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_ZLIB=)n,\1y,' $1/.config
> > test "$DPDK_DEP_ZLIB" != y || \
> > - sed -ri 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
> > + sed -ri="" 's,(COMPRESSDEV_TEST=)n,\1y,' $1/.config
> > test "$DPDK_DEP_PCAP" != y || \
> > - sed -ri 's,(PCAP=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PCAP=)n,\1y,' $1/.config
> > test -z "$ARMV8_CRYPTO_LIB_PATH" || \
> > - sed -ri 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_ARMV8_CRYPTO=)n,\1y,' $1/.config
> > test "$DPDK_DEP_IPSEC_MB" != y || \
> > - sed -ri 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
> > test "$DPDK_DEP_IPSEC_MB" != y || \
> > - sed -ri 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
> > test -z "$LIBSSO_SNOW3G_PATH" || \
> > - sed -ri 's,(PMD_SNOW3G=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_SNOW3G=)n,\1y,' $1/.config
> > test -z "$LIBSSO_KASUMI_PATH" || \
> > - sed -ri 's,(PMD_KASUMI=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_KASUMI=)n,\1y,' $1/.config
> > test -z "$LIBSSO_ZUC_PATH" || \
> > - sed -ri 's,(PMD_ZUC=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_ZUC=)n,\1y,' $1/.config
> > test "$DPDK_DEP_SSL" != y || \
> > - sed -ri 's,(PMD_CCP=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_CCP=)n,\1y,' $1/.config
> > test "$DPDK_DEP_SSL" != y || \
> > - sed -ri 's,(PMD_OPENSSL=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_OPENSSL=)n,\1y,' $1/.config
> > test "$DPDK_DEP_SSL" != y || \
> > - sed -ri 's,(QAT_SYM=)n,\1y,' $1/.config
> > + sed -ri="" 's,(QAT_SYM=)n,\1y,' $1/.config
> > test -z "$FLEXRAN_SDK" || \
> > - sed -ri 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
> > - sed -ri 's,(SCHED_.*=)n,\1y,' $1/.config
> > + sed -ri="" 's,(BBDEV_TURBO_SW=)n,\1y,' $1/.config
> > + sed -ri="" 's,(SCHED_.*=)n,\1y,' $1/.config
> > test -z "$LIBMUSDK_PATH" || \
> > - sed -ri 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
> > + sed -ri="" 's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
> > test -z "$LIBMUSDK_PATH" || \
> > - sed -ri 's,(MVPP2_PMD=)n,\1y,' $1/.config
> > + sed -ri="" 's,(MVPP2_PMD=)n,\1y,' $1/.config
> > test -z "$LIBMUSDK_PATH" || \
> > - sed -ri 's,(MVNETA_PMD=)n,\1y,' $1/.config
> > + sed -ri="" 's,(MVNETA_PMD=)n,\1y,' $1/.config
> > test "$DPDK_DEP_ELF" != y || \
> > - sed -ri 's,(BPF_ELF=)n,\1y,' $1/.config
> > + sed -ri="" 's,(BPF_ELF=)n,\1y,' $1/.config
> > test "$DPDK_DEP_JSON" != y || \
> > - sed -ri 's,(TELEMETRY=)n,\1y,' $1/.config
> > + sed -ri="" 's,(TELEMETRY=)n,\1y,' $1/.config
> > build_config_hook $1 $2 $3
> >
> > # Explicit enabler/disabler (uppercase)
> > for option in $(echo $3 | sed 's,[~+], &,g') ; do
> > pattern=$(echo $option | cut -c2-)
> > if echo $option | grep -q '^~' ; then
> > - sed -ri "s,($pattern=)y,\1n," $1/.config
> > + sed -ri="" "s,($pattern=)y,\1n," $1/.config
> > elif echo $option | grep -q '^+' ; then
> > - sed -ri "s,($pattern=)n,\1y," $1/.config
> > + sed -ri="" "s,($pattern=)n,\1y," $1/.config
> > fi
> > done
> > fi
> > @@ -220,22 +224,22 @@ for conf in $configs ; do
> > # reload config with DPDK_TARGET set
> > DPDK_TARGET=$target
> > reset_env
> > - . $(dirname $(readlink -e $0))/load-devel-config
> > + . $(dirname $(readlink -f $0))/load-devel-config
> >
> > options=$(echo $conf | sed 's,[^~+]*,,')
> > dir=$conf
> > config $dir $target $options
> >
> > echo "================== Build $dir"
> > - make -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
> > + ${MAKE} -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
> > EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose O=$dir
> > ! $short || break
> > echo "================== Build examples for $dir"
> > export RTE_SDK=$(pwd)
> > export RTE_TARGET=$dir
> > - make -j$J -sC examples \
> > + ${MAKE} -j$J -sC examples \
> > EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose \
> > - O=$(readlink -m $dir/examples)
> > + O=$(readlink -f $dir)/examples
> > unset RTE_TARGET
> > echo "################## $dir done."
> > unset dir
> > @@ -244,9 +248,9 @@ done
> > if ! $short ; then
> > mkdir -p .check
> > echo "================== Build doxygen HTML API"
> > - make doc-api-html >/dev/null 2>.check/doc.txt
> > + ${MAKE} doc-api-html >/dev/null 2>.check/doc.txt
> > echo "================== Build sphinx HTML guides"
> > - make doc-guides-html >/dev/null 2>>.check/doc.txt
> > + ${MAKE} doc-guides-html >/dev/null 2>>.check/doc.txt
> > echo "================== Check docs"
> > diff -u /dev/null .check/doc.txt
> > fi
> > diff --git a/devtools/validate-abi.sh b/devtools/validate-abi.sh
> > index 138436d93..f64e19d38 100755
> > --- a/devtools/validate-abi.sh
> > +++ b/devtools/validate-abi.sh
> > @@ -181,7 +181,7 @@ case "${dst}" in
> > /*) ;;
> > *) dst=${PWD}/${dst} ;;
> > esac
> > -dpdkroot=$(readlink -e $(dirname $0)/..)
> > +dpdkroot=$(readlink -f $(dirname $0)/..)
> >
> > if [ -e "${dst}" -a "$force" = 0 ]; then
> > echo "The ${dst} directory is not empty. Remove it, use another"
> > --
> > 2.11.0
> >
>
> Reviewed-by: David Marchand <david.marchand at redhat.com>
Small nit on the title, it should be FreeBSD.
--
David Marchand
More information about the dev
mailing list