[dpdk-dev] [EXT] [PATCH 19/39] eventdev: add common initialize routine for eventmode devs

Sunil Kumar Kori skori at marvell.com
Tue Jun 11 10:58:16 CEST 2019



Regards
Sunil Kumar Kori

>-----Original Message-----
>From: dev <dev-bounces at dpdk.org> On Behalf Of Anoob Joseph
>Sent: Monday, June 3, 2019 11:02 PM
>To: Jerin Jacob Kollanukkaran <jerinj at marvell.com>; Nikhil Rao
><nikhil.rao at intel.com>; Erik Gabriel Carrillo <erik.g.carrillo at intel.com>;
>Abhinandan Gujjar <abhinandan.gujjar at intel.com>; Bruce Richardson
><bruce.richardson at intel.com>; Pablo de Lara
><pablo.de.lara.guarch at intel.com>
>Cc: Anoob Joseph <anoobj at marvell.com>; Narayana Prasad Raju Athreya
><pathreya at marvell.com>; dev at dpdk.org; Lukas Bartosik
><lbartosik at marvell.com>; Pavan Nikhilesh Bhagavatula
><pbhagavatula at marvell.com>; Hemant Agrawal
><hemant.agrawal at nxp.com>; Nipun Gupta <nipun.gupta at nxp.com>; Harry
>van Haaren <harry.van.haaren at intel.com>; Mattias Rönnblom
><mattias.ronnblom at ericsson.com>; Liang Ma <liang.j.ma at intel.com>
>Subject: [EXT] [dpdk-dev] [PATCH 19/39] eventdev: add common initialize
>routine for eventmode devs
>
>External Email
>
>----------------------------------------------------------------------
>Adding framework for common initialization routine for event mode.
>Event mode would involve initialization of multiple devices, like eventdev,
>ethdev etc and this routine would be the placeholder for all initialization to
>come in.
>
>Signed-off-by: Anoob Joseph <anoobj at marvell.com>
>Signed-off-by: Lukasz Bartosik <lbartosik at marvell.com>
>---
> lib/librte_eventdev/rte_eventdev_version.map |  2 ++
> lib/librte_eventdev/rte_eventmode_helper.c   | 51
>+++++++++++++++++++++++++++-
> lib/librte_eventdev/rte_eventmode_helper.h   | 26 +++++++++++++-
> 3 files changed, 77 insertions(+), 2 deletions(-)
>
>diff --git a/lib/librte_eventdev/rte_eventdev_version.map
>b/lib/librte_eventdev/rte_eventdev_version.map
>index 1199064..e156fa0 100644
>--- a/lib/librte_eventdev/rte_eventdev_version.map
>+++ b/lib/librte_eventdev/rte_eventdev_version.map
>@@ -130,4 +130,6 @@ EXPERIMENTAL {
> 	rte_event_eth_rx_adapter_stats_get;
> 	rte_eventmode_helper_print_options_list;
> 	rte_eventmode_helper_print_options_description;
>+	rte_eventmode_helper_parse_args;
>+	rte_eventmode_helper_initialize_devs;
> };
>diff --git a/lib/librte_eventdev/rte_eventmode_helper.c
>b/lib/librte_eventdev/rte_eventmode_helper.c
>index 38f1a2b..d1a569b 100644
>--- a/lib/librte_eventdev/rte_eventmode_helper.c
>+++ b/lib/librte_eventdev/rte_eventmode_helper.c
>@@ -3,6 +3,7 @@
>  */
> #include <getopt.h>
>
>+#include <rte_ethdev.h>
> #include <rte_eventmode_helper.h>
> #include <rte_malloc.h>
>
>@@ -92,7 +93,7 @@ em_initialize_helper_conf(struct
>rte_eventmode_helper_conf *conf)
> 	conf->eth_portmask = -1;
> }
>
>-struct rte_eventmode_helper_conf *
>+struct rte_eventmode_helper_conf * __rte_experimental
> rte_eventmode_helper_parse_args(int argc, char **argv)  {
> 	int32_t opt, ret;
>@@ -152,3 +153,51 @@ rte_eventmode_helper_parse_args(int argc, char
>**argv)
>
> 	return NULL;
> }
>+
>+int32_t __rte_experimental
>+rte_eventmode_helper_initialize_devs(
>+		struct rte_eventmode_helper_conf *mode_conf) {
>+	int ret;
>+	uint16_t portid;
>+
>+	if (mode_conf == NULL) {
>+		RTE_EM_HLPR_LOG_ERR("Invalid conf");
>+		return -1;
>+	}
>+
>+	if (mode_conf->mode !=
>RTE_EVENTMODE_HELPER_PKT_TRANSFER_MODE_EVENT)
>+		return 0;
>+
>+	if (mode_conf->mode_params == NULL) {
>+		RTE_EM_HLPR_LOG_ERR("Invalid mode params");
>+		return -1;
Better to return standard error number like EINVAL etc instead of having -1 or 0.
Consider it for all applicable places.

>+	}
>+
>+	/* Stop eth devices before setting up adapter */
>+	RTE_ETH_FOREACH_DEV(portid) {
>+
>+		/* Use only the ports enabled */
>+		if ((mode_conf->eth_portmask & (1 << portid)) == 0)
>+			continue;
>+
>+		rte_eth_dev_stop(portid);
>+	}
>+
>+	/* Start eth devices after setting up adapter */
>+	RTE_ETH_FOREACH_DEV(portid) {
>+
>+		/* Use only the ports enabled */
>+		if ((mode_conf->eth_portmask & (1 << portid)) == 0)
>+			continue;
>+
>+		ret = rte_eth_dev_start(portid);
>+		if (ret < 0) {
>+			RTE_EM_HLPR_LOG_ERR(
>+				"Error starting eth dev %d", portid);
>+			return -1;
>+		}
>+	}
>+
>+	return 0;
>+}
>diff --git a/lib/librte_eventdev/rte_eventmode_helper.h
>b/lib/librte_eventdev/rte_eventmode_helper.h
>index 77e69d0..0eafed3 100644
>--- a/lib/librte_eventdev/rte_eventmode_helper.h
>+++ b/lib/librte_eventdev/rte_eventmode_helper.h
>@@ -62,9 +62,33 @@
>rte_eventmode_helper_print_options_description(void);
>  * @return
>  *   Configuration generated by parsing the event mode args.
>  */
>-struct rte_eventmode_helper_conf *
>+struct rte_eventmode_helper_conf * __rte_experimental
> rte_eventmode_helper_parse_args(int argc, char **argv);
>
>+/* Helper functions for initialization, & launching workers */
>+
>+/**
>+ * Initialize event mode devices
>+ *
>+ * Application could call this function to get the event device, eth
>+device
>+ * and eth rx adapter initialized according to the conf populated using
>+the
>+ * command line args.
>+ *
>+ * Application is expected to initialize the eth device and then the
>+eventmode
>+ * helper subsystem will stop & start eth device according to it's requirement.
>+ * So call to this function should be done after the eth device is
>+successfully
>+ * initialized.
Comments should be updated for its default value of conf->eth_portmask.

>+ *
>+ * @param mode_conf
>+ *   Configuration of the mode in which app is doing packet handling
>+ * @return
>+ *  - 0 on success.
>+ *  - (<0) on failure.
>+ */
>+int32_t __rte_experimental
>+rte_eventmode_helper_initialize_devs(
>+		struct rte_eventmode_helper_conf *mode_conf);
>+
> #ifdef __cplusplus
> }
> #endif
>--
>2.7.4



More information about the dev mailing list