[dpdk-dev] [PATCH 3/3] examples/ipsec-secgw: add support for ipv6 options
Ananyev, Konstantin
konstantin.ananyev at intel.com
Tue May 14 14:51:16 CEST 2019
>
> Using transport with IPv6 and header extensions requires calculating
> total header length including extensions up to ESP header which is
> achieved with iteratively parsing extensions when preparing traffic
> for processing. Calculated l3_len is later used to determine SPI
> field offset for an inbound traffic and to reconstruct L3 header by
> librte_ipsec.
>
> A simple unittest script is provided to test various headers for the
> IPv6 transport mode. Within each test case a test packet is crafted
> with Scapy and sent as an inbound or outbound traffic. Application
> response is then checked with a set of assertions.
ipsec-secgw changes itself looks good to me.
One comment I have - would be good to incorporate your test script
into run_test.sh, so user can run all tests in one go.
Konstantin
>
> Signed-off-by: Marcin Smoczynski <marcinx.smoczynski at intel.com>
> ---
> examples/ipsec-secgw/ipsec-secgw.c | 33 +++-
> examples/ipsec-secgw/sa.c | 5 +-
> examples/ipsec-secgw/test/test-scapy.py | 231 ++++++++++++++++++++++++
> 3 files changed, 260 insertions(+), 9 deletions(-)
> create mode 100755 examples/ipsec-secgw/test/test-scapy.py
>
> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
> index 478dd80c2..1c49aa22c 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -41,6 +41,7 @@
> #include <rte_jhash.h>
> #include <rte_cryptodev.h>
> #include <rte_security.h>
> +#include <rte_ip.h>
>
> #include "ipsec.h"
> #include "parser.h"
> @@ -248,16 +249,38 @@ prepare_one_packet(struct rte_mbuf *pkt, struct ipsec_traffic *t)
> pkt->l2_len = 0;
> pkt->l3_len = sizeof(struct ip);
> } else if (eth->ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv6)) {
> - nlp = (uint8_t *)rte_pktmbuf_adj(pkt, ETHER_HDR_LEN);
> - nlp = RTE_PTR_ADD(nlp, offsetof(struct ip6_hdr, ip6_nxt));
> - if (*nlp == IPPROTO_ESP)
> + int next_proto;
> + size_t l3len, ext_len;
> + struct ipv6_hdr *v6h;
> + uint8_t *p;
> +
> + /* get protocol type */
> + v6h = (struct ipv6_hdr *)rte_pktmbuf_adj(pkt, ETHER_HDR_LEN);
> + next_proto = v6h->proto;
> +
> + /* determine l3 header size up to ESP extension */
> + l3len = sizeof(struct ip6_hdr);
> + p = rte_pktmbuf_mtod(pkt, uint8_t *);
> + while (next_proto != IPPROTO_ESP && l3len < pkt->data_len &&
> + (next_proto = rte_ipv6_get_next_ext(p + l3len,
> + next_proto, &ext_len)) >= 0)
> + l3len += ext_len;
> +
> + /* drop packet when IPv6 header exceeds first segment length */
> + if (unlikely(l3len > pkt->data_len)) {
> + rte_pktmbuf_free(pkt);
> + return;
> + }
> +
> + if (next_proto == IPPROTO_ESP)
> t->ipsec.pkts[(t->ipsec.num)++] = pkt;
> else {
> - t->ip6.data[t->ip6.num] = nlp;
> + t->ip6.data[t->ip6.num] = rte_pktmbuf_mtod_offset(pkt,
> + uint8_t *, offsetof(struct ipv6_hdr, proto));
> t->ip6.pkts[(t->ip6.num)++] = pkt;
> }
> pkt->l2_len = 0;
> - pkt->l3_len = sizeof(struct ip6_hdr);
> + pkt->l3_len = l3len;
> } else {
> /* Unknown/Unsupported type, drop the packet */
> RTE_LOG(ERR, IPSEC, "Unsupported packet type 0x%x\n",
> diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
> index b850e9839..607527d08 100644
> --- a/examples/ipsec-secgw/sa.c
> +++ b/examples/ipsec-secgw/sa.c
> @@ -1228,10 +1228,7 @@ single_inbound_lookup(struct ipsec_sa *sadb, struct rte_mbuf *pkt,
> *sa_ret = NULL;
>
> ip = rte_pktmbuf_mtod(pkt, struct ip *);
> - if (ip->ip_v == IPVERSION)
> - esp = (struct esp_hdr *)(ip + 1);
> - else
> - esp = (struct esp_hdr *)(((struct ip6_hdr *)ip) + 1);
> + esp = rte_pktmbuf_mtod_offset(pkt, struct esp_hdr *, pkt->l3_len);
>
> if (esp->spi == INVALID_SPI)
> return;
> diff --git a/examples/ipsec-secgw/test/test-scapy.py b/examples/ipsec-secgw/test/test-scapy.py
> new file mode 100755
> index 000000000..d7f66b734
> --- /dev/null
> +++ b/examples/ipsec-secgw/test/test-scapy.py
> @@ -0,0 +1,231 @@
> +#!/usr/bin/env python3
> +
> +# Run DPDK IPsec example with following arguments:
> +# ./dpdk-ipsec-secgw --log-level=31 -l 0 --vdev=crypto_openssl --vdev=net_tap0 --vdev=net_tap1 -- -P -p 0x3 -u 0x1 --config
> "(0,0,0),(1,0,0)" -f test-transport.cfg -l
> +# Two tap ports are expected: 0: unprotected (remote), 1: protected (local)
> +
> +# sample configuration:
> +# sp ipv6 out esp protect 5 pri 1 \
> +# src 1111:0000:0000:0000:0000:0000:0000:0000/64 \
> +# dst 2222:0000:0000:0000:0000:0000:0000:0000/64 \
> +# sport 0:65535 dport 0:65535
> +#
> +# sp ipv6 in esp protect 6 pri 1 \
> +# src 2222:0000:0000:0000:0000:0000:0000:0000/64 \
> +# dst 1111:0000:0000:0000:0000:0000:0000:0000/64 \
> +# sport 0:65535 dport 0:65535
> +#
> +# sa out 5 cipher_algo aes-128-cbc cipher_key 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 \
> +# auth_algo sha1-hmac auth_key 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 \
> +# mode transport
> +#
> +# sa in 6 cipher_algo aes-128-cbc cipher_key 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 \
> +# auth_algo sha1-hmac auth_key 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 \
> +# mode transport
> +#
> +# rt ipv6 dst 1111:0000:0000:0000:0000:0000:0000:0000/64 port 1
> +# rt ipv6 dst 2222:0000:0000:0000:0000:0000:0000:0000/64 port 0
> +#
> +# run tests with:
> +# python3 -m unittest test-scapy
> +
> +
> +import socket
> +import sys
> +import unittest
> +from scapy.all import *
> +
> +
> +SRC_ETHER = "52:54:00:00:00:01"
> +DST_ETHER = "52:54:00:00:00:02"
> +SRC_ADDR = "1111::1"
> +DST_ADDR = "2222::1"
> +LOCAL_IFACE = "dtap1"
> +REMOTE_IFACE = "dtap0"
> +
> +
> +class Interface(object):
> + ETH_P_ALL = 3
> + MAX_PACKET_SIZE = 1280
> + def __init__(self, ifname):
> + self.name = ifname
> + self.s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, socket.htons(ETH_P_ALL))
> + self.s.bind((self.name, 0, socket.PACKET_OTHERHOST))
> +
> + def __del__(self):
> + self.s.close()
> +
> + def send_packet(self, pkt):
> + self.send_bytes(bytes(pkt))
> +
> + def send_bytes(self, bytedata):
> + self.s.send(bytedata)
> +
> + def recv_packet(self):
> + return Ether(self.recv_bytes())
> +
> + def recv_bytes(self):
> + return self.s.recv(Interface.MAX_PACKET_SIZE)
> +
> +
> +class TestTransportMode(unittest.TestCase):
> + # There is a bug in the IPsec Scapy implementation
> + # which causes invalid packet reconstruction after
> + # successful decryption. This method is a workaround.
> + @staticmethod
> + def decrypt(pkt, sa):
> + esp = pkt[ESP]
> +
> + # decrypt dummy packet with no extensions
> + d = sa.decrypt(IPv6()/esp)
> +
> + # fix 'next header' in the preceding header of the original
> + # packet and remove ESP
> + pkt[ESP].underlayer.nh = d[IPv6].nh
> + pkt[ESP].underlayer.remove_payload()
> +
> + # combine L3 header with decrypted payload
> + npkt = pkt/d[IPv6].payload
> +
> + # fix length
> + npkt[IPv6].plen = d[IPv6].plen + len(pkt[IPv6].payload)
> +
> + return npkt
> +
> + def setUp(self):
> + self.ilocal = Interface(LOCAL_IFACE)
> + self.iremote = Interface(REMOTE_IFACE)
> + self.outb_sa = SecurityAssociation(ESP, spi=5, crypt_algo='AES-CBC', crypt_key='\x00'*16, auth_algo='HMAC-SHA1-96',
> auth_key='\x00'*20)
> + self.inb_sa = SecurityAssociation(ESP, spi=6, crypt_algo='AES-CBC', crypt_key='\x00'*16, auth_algo='HMAC-SHA1-96',
> auth_key='\x00'*20)
> +
> + def test_outb_ipv6_noopt(self):
> + pkt = Ether(src=SRC_ETHER, dst=DST_ETHER)
> + pkt /= IPv6(src=SRC_ADDR, dst=DST_ADDR)
> + pkt /= UDP(sport=123,dport=456)/Raw(load="abc")
> + self.ilocal.send_packet(pkt)
> +
> + # check response
> + resp = self.iremote.recv_packet()
> + self.assertEqual(resp[IPv6].nh, socket.IPPROTO_ESP)
> + self.assertEqual(resp[ESP].spi, 5)
> +
> + # decrypt response, check packet after decryption
> + d = TestTransportMode.decrypt(resp[IPv6], self.outb_sa)
> + self.assertEqual(d[IPv6].nh, socket.IPPROTO_UDP)
> + self.assertEqual(d[UDP].sport, 123)
> + self.assertEqual(d[UDP].dport, 456)
> + self.assertEqual(bytes(d[UDP].payload), b'abc')
> +
> + def test_outb_ipv6_opt(self):
> + hoptions = []
> + hoptions.append(RouterAlert(value=2))
> + hoptions.append(Jumbo(jumboplen=5000))
> + hoptions.append(Pad1())
> +
> + doptions = []
> + doptions.append(HAO(hoa="1234::4321"))
> +
> + pkt = Ether(src=SRC_ETHER, dst=DST_ETHER)
> + pkt /= IPv6(src=SRC_ADDR, dst=DST_ADDR)
> + pkt /= IPv6ExtHdrHopByHop(options=hoptions)
> + pkt /= IPv6ExtHdrRouting(addresses=["3333::3","4444::4"])
> + pkt /= IPv6ExtHdrDestOpt(options=doptions)
> + pkt /= UDP(sport=123,dport=456)/Raw(load="abc")
> + self.ilocal.send_packet(pkt)
> +
> + # check response
> + resp = self.iremote.recv_packet()
> + self.assertEqual(resp[IPv6].nh, socket.IPPROTO_HOPOPTS)
> +
> + # check extensions
> + self.assertEqual(resp[IPv6ExtHdrHopByHop].nh, socket.IPPROTO_ROUTING)
> + self.assertEqual(resp[IPv6ExtHdrRouting].nh, socket.IPPROTO_DSTOPTS)
> + self.assertEqual(resp[IPv6ExtHdrDestOpt].nh, socket.IPPROTO_ESP)
> +
> + # check ESP
> + self.assertEqual(resp[ESP].spi, 5)
> +
> + # decrypt response, check packet after decryption
> + d = TestTransportMode.decrypt(resp[IPv6], self.outb_sa)
> + self.assertEqual(d[IPv6].nh, socket.IPPROTO_HOPOPTS)
> + self.assertEqual(d[IPv6ExtHdrHopByHop].nh, socket.IPPROTO_ROUTING)
> + self.assertEqual(d[IPv6ExtHdrRouting].nh, socket.IPPROTO_DSTOPTS)
> + self.assertEqual(d[IPv6ExtHdrDestOpt].nh, socket.IPPROTO_UDP)
> +
> + # check UDP
> + self.assertEqual(d[UDP].sport, 123)
> + self.assertEqual(d[UDP].dport, 456)
> + self.assertEqual(bytes(d[UDP].payload), b'abc')
> +
> + def test_inb_ipv6_noopt(self):
> + # encrypt and send raw UDP packet
> + pkt = IPv6(src=DST_ADDR, dst=SRC_ADDR)
> + pkt /= UDP(sport=123,dport=456)/Raw(load="abc")
> + e = self.inb_sa.encrypt(pkt)
> + e = Ether(src=DST_ETHER, dst=SRC_ETHER)/e
> + self.iremote.send_packet(e)
> +
> + # check response
> + resp = self.ilocal.recv_packet()
> + self.assertEqual(resp[IPv6].nh, socket.IPPROTO_UDP)
> +
> + # check UDP packet
> + self.assertEqual(resp[UDP].sport, 123)
> + self.assertEqual(resp[UDP].dport, 456)
> + self.assertEqual(bytes(resp[UDP].payload), b'abc')
> +
> + def test_inb_ipv6_opt(self):
> + hoptions = []
> + hoptions.append(RouterAlert(value=2))
> + hoptions.append(Jumbo(jumboplen=5000))
> + hoptions.append(Pad1())
> +
> + doptions = []
> + doptions.append(HAO(hoa="1234::4321"))
> +
> + # prepare packet with options
> + pkt = IPv6(src=DST_ADDR, dst=SRC_ADDR)
> + pkt /= IPv6ExtHdrHopByHop(options=hoptions)
> + pkt /= IPv6ExtHdrRouting(addresses=["3333::3","4444::4"])
> + pkt /= IPv6ExtHdrDestOpt(options=doptions)
> + pkt /= UDP(sport=123,dport=456)/Raw(load="abc")
> +
> + # encrypt and send packet
> + e = self.inb_sa.encrypt(pkt)
> + e = Ether(src=DST_ETHER, dst=SRC_ETHER)/e
> + self.iremote.send_packet(e)
> +
> + # check response
> + resp = self.ilocal.recv_packet()
> + self.assertEqual(resp[IPv6].nh, socket.IPPROTO_HOPOPTS)
> + self.assertEqual(resp[IPv6ExtHdrHopByHop].nh, socket.IPPROTO_ROUTING)
> + self.assertEqual(resp[IPv6ExtHdrRouting].nh, socket.IPPROTO_DSTOPTS)
> + self.assertEqual(resp[IPv6ExtHdrDestOpt].nh, socket.IPPROTO_UDP)
> +
> + # check UDP
> + self.assertEqual(resp[UDP].sport, 123)
> + self.assertEqual(resp[UDP].dport, 456)
> + self.assertEqual(bytes(resp[UDP].payload), b'abc')
> +
> + def test_inb_ipv6_frag(self):
> + # prepare ESP payload
> + pkt = UDP(sport=123,dport=456)/Raw(load="abc")
> + e = self.inb_sa.encrypt(IPv6()/pkt)
> +
> + # craft and send inbound packet
> + e = Ether(src=DST_ETHER, dst=SRC_ETHER)/IPv6(src=DST_ADDR, dst=SRC_ADDR)/IPv6ExtHdrFragment()/e[IPv6].payload
> + self.iremote.send_packet(e)
> +
> + # check response
> + resp = self.ilocal.recv_packet()
> + self.assertEqual(resp[IPv6].nh, socket.IPPROTO_FRAGMENT)
> + self.assertEqual(resp[IPv6ExtHdrFragment].nh, socket.IPPROTO_UDP)
> +
> + # check UDP
> + self.assertEqual(resp[UDP].sport, 123)
> + self.assertEqual(resp[UDP].dport, 456)
> + self.assertEqual(bytes(resp[UDP].payload), b'abc')
> +
> +
> +if __name__ == "__main__":
> + unittest.main()
> --
> 2.21.0.windows.1
More information about the dev
mailing list