[dpdk-dev] [PATCH v17 00/10] ethdev: add new Rx offload flags
pbhagavatula at marvell.com
pbhagavatula at marvell.com
Mon Nov 11 14:19:04 CET 2019
From: Pavan Nikhilesh <pbhagavatula at marvell.com>
Add new Rx offload flags `DEV_RX_OFFLOAD_RSS_HASH` These flags can be used
to enable/disable PMD writes to rte_mbuf fields `hash.rss` and also
`ol_flags:PKT_RX_RSS`.
Add new packet type set function `rte_eth_dev_set_ptypes`,
allows application to inform PMDs about the packet types it is interested
in. Based on ptypes requested by application PMDs can optimize the Rx path.
For example, if a given PMD doesn't support any packet types that the
application is interested in then the application can disable[1] writes to
`mbuf.packet_type` done by the PMD and use a software ptype parser.
[1] rte_eth_dev_set_ptypes(*port_id*, RTE_PTYPE_UNKNOWN,
NULL, 0);
v17 Changes:
-----------
- Split 8/8 into two patches.
- Add rss_hash to port rx_offloads in testpmd.
- Add log when set_ptype fails.
- Fix few spell check.
v16 Changes:
-----------
- Fix testpmd documentation(Bernard).
- s/rte_eth_dev_set_supported_ptypes/rte_eth_dev_set_ptypes.
- Fix release notes placement.
- Enhance offload validation(Andrew).
- Remove if condition in drivers/net while enabling RSS_HASH by default.
- Spilt 5/7 into two patches.
v15 Changes:
-----------
- Fix sfc RSS_HASH offload check.
- Fix ethdev RSS_HASH offload check when mq_mode is configured with
MQ_RX_NONE.
- Extend offload validation to return error in the case where application
has requested an offload to be enabled and PMD couldn't honor it.
v14 Changes:
-----------
- Remove log from drives
- Add log in rte_eth_dev_configure when certain offloads are requested to be
disabled and PMD cannot honor the request.
- Make changes to default offloads in net/sfc.(Andrew)
v13 Changes:
-----------
- Remove DEV_RX_OFFLOAD_FLOW_MARK from this patchset to allow foreward
progress will be sent as a seperate patch.
- Use set_supported function only for l2fwd and testpmd.
- Add info log in drivers which expose the DEV_RX_OFFLOAD_RSS_HASH
indicating that disabling DEV_RX_OFFLOAD_RSS_HASH is not supported.
- Few documentation changes.
v12 Changes:
-----------
- Rebase onto next-net.
v11 Changes:
-----------
- Use RTE_DIM to get array size.
- Since we are using a list of MASKs to validate ptype_mask return -EINVAL
if any unknown mask is set.
- Rebase to TOT.
v10 Changes:
-----------
- Modify ptype_mask validation in set_supported_ptypes.(Andrew)
v9 Changes:
----------
- Add ptype_mask validation in set_supported_ptypes.(Andrew)
- Make description more verbose.
v8 Changes:
----------
- Make description more verbose.
- Set RTE_PTYPE_UNKNOWN in set_ptypes array when either get ot set ptypes
is not supported by ethernet device.
v7 Changes:
----------
- Fix unused variable in net/octeontx2
v6 Changes:
----------
- Add additional checks for set supported ptypes.(Andrew)
- Clarify `rte_eth_dev_set_supported_ptypes` documentation.
- Remove DEV_RX_OFFLOAD_FLOW_MARK emulation from net/octeontx2.
v5 Changes:
----------
- Fix typos.
v4 Changes:
----------
- Set the last element in set_ptype array as RTE_PTYPE_UNKNOWN to mark the end
of array.
- Fix invalid set ptype function call in examples.
- Remove setting rte_eth_dev_set_supported_ptypes to UNKNOWN in l3fwd-power.
v3 Changes:
----------
- Add missing release notes. (Andrew)
- Re-word various descriptions.
- Fix ptype set logic.
v2 Changes:
----------
- Update release notes. (Andrew)
- Redo commit logs. (Andrew)
- Disable ptype parsing for unsupported examples. (Jerin)
- Disable RSS write only in generic mode eventdev_pipeline. (Jerin)
- Modify set_supported_ptypes function to return successfuly set mask
instead of failure.
- Dropped set_supported_ptypes to drivers by handling in library
layer, interested PMD can add it in.
Pavan Nikhilesh (10):
ethdev: add set ptype function
ethdev: add mbuf RSS update as an offload
ethdev: add validation to offloads set by PMD
drivers/net: update Rx RSS hash offload capabilities
examples/eventdev_pipeline: split port init sequence
examples/eventdev_pipeline: add new Rx RSS hash offload
examples/l2fwd: disable ptype parsing
app/testpmd: add command to set supported ptype mask
app/testpmd: disable packet type parsing by default
app/testpmd: add RSS hash offload to port Rx offload cmd
app/test-pmd/cmdline.c | 90 ++++++++-
app/test-pmd/testpmd.c | 12 ++
app/test-pmd/testpmd.h | 1 +
doc/guides/nics/features.rst | 9 +-
doc/guides/rel_notes/release_19_11.rst | 15 ++
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 9 +-
drivers/net/bnxt/bnxt_ethdev.c | 6 +-
drivers/net/cxgbe/cxgbe.h | 3 +-
drivers/net/cxgbe/cxgbe_ethdev.c | 2 +
drivers/net/dpaa/dpaa_ethdev.c | 3 +-
drivers/net/dpaa2/dpaa2_ethdev.c | 1 +
drivers/net/e1000/igb_ethdev.c | 4 +
drivers/net/e1000/igb_rxtx.c | 3 +-
drivers/net/enic/enic_ethdev.c | 2 +
drivers/net/enic/enic_res.c | 3 +-
drivers/net/fm10k/fm10k_ethdev.c | 5 +-
drivers/net/hinic/hinic_pmd_ethdev.c | 5 +-
drivers/net/i40e/i40e_ethdev.c | 5 +-
drivers/net/iavf/iavf_ethdev.c | 5 +-
drivers/net/ice/ice_ethdev.c | 5 +-
drivers/net/ixgbe/ixgbe_ethdev.c | 5 +
drivers/net/ixgbe/ixgbe_rxtx.c | 3 +-
drivers/net/liquidio/lio_ethdev.c | 5 +-
drivers/net/mlx4/mlx4.c | 2 +
drivers/net/mlx4/mlx4_rxq.c | 3 +-
drivers/net/mlx5/mlx5_ethdev.c | 3 +
drivers/net/mlx5/mlx5_rxq.c | 3 +-
drivers/net/netvsc/hn_ethdev.c | 2 +
drivers/net/netvsc/hn_rndis.c | 3 +-
drivers/net/nfp/nfp_net.c | 5 +-
drivers/net/octeontx2/otx2_ethdev.c | 3 +-
drivers/net/octeontx2/otx2_ethdev.h | 15 +-
drivers/net/qede/qede_ethdev.c | 5 +-
drivers/net/sfc/sfc_ef10_essb_rx.c | 3 +-
drivers/net/sfc/sfc_ef10_rx.c | 3 +-
drivers/net/sfc/sfc_rx.c | 7 +-
drivers/net/thunderx/nicvf_ethdev.c | 2 +
drivers/net/thunderx/nicvf_ethdev.h | 3 +-
drivers/net/vmxnet3/vmxnet3_ethdev.c | 5 +-
examples/eventdev_pipeline/main.c | 128 ------------
.../pipeline_worker_generic.c | 132 +++++++++++++
.../eventdev_pipeline/pipeline_worker_tx.c | 128 ++++++++++++
examples/l2fwd/Makefile | 2 +
examples/l2fwd/main.c | 5 +
examples/l2fwd/meson.build | 2 +
lib/librte_ethdev/rte_ethdev.c | 182 +++++++++++++++++-
lib/librte_ethdev/rte_ethdev.h | 37 ++++
lib/librte_ethdev/rte_ethdev_core.h | 17 ++
lib/librte_ethdev/rte_ethdev_version.map | 1 +
49 files changed, 731 insertions(+), 171 deletions(-)
--
2.17.1
More information about the dev
mailing list