[dpdk-dev] [PATCH v3] net/e1000: fix link status update

Ye Xiaolong xiaolong.ye at intel.com
Mon Nov 18 08:23:27 CET 2019


Hi, wenzhuo

Could you help ack this patch if you are ok with this change?

Thanks,
Xiaolong

On 11/18, Lunyuan Cui wrote:
>Unassigned variable should not be used as judgment, and there
>is no need to update link status according to old link status.
>This patch fix the issue.
>
>Change the variable from link_check to link_up.
>
>Fixes: 80ba61115e77 ("net/e1000: use link status helper functions")
>Cc: stable at dpdk.org
>
>Signed-off-by: Lunyuan Cui <lunyuanx.cui at intel.com>
>---
>v3:
>* Change the variable from link_check to link_up.
>
>v2
>* Delete incorrect judgment
>---
> drivers/net/e1000/em_ethdev.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
>diff --git a/drivers/net/e1000/em_ethdev.c b/drivers/net/e1000/em_ethdev.c
>index 9a88b50b2..080cbe2df 100644
>--- a/drivers/net/e1000/em_ethdev.c
>+++ b/drivers/net/e1000/em_ethdev.c
>@@ -1121,9 +1121,9 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
> 	struct e1000_hw *hw =
> 		E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> 	struct rte_eth_link link;
>-	int link_check, count;
>+	int link_up, count;
> 
>-	link_check = 0;
>+	link_up = 0;
> 	hw->mac.get_link_status = 1;
> 
> 	/* possible wait-to-complete in up to 9 seconds */
>@@ -1133,31 +1133,31 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
> 		case e1000_media_type_copper:
> 			/* Do the work to read phy */
> 			e1000_check_for_link(hw);
>-			link_check = !hw->mac.get_link_status;
>+			link_up = !hw->mac.get_link_status;
> 			break;
> 
> 		case e1000_media_type_fiber:
> 			e1000_check_for_link(hw);
>-			link_check = (E1000_READ_REG(hw, E1000_STATUS) &
>+			link_up = (E1000_READ_REG(hw, E1000_STATUS) &
> 					E1000_STATUS_LU);
> 			break;
> 
> 		case e1000_media_type_internal_serdes:
> 			e1000_check_for_link(hw);
>-			link_check = hw->mac.serdes_has_link;
>+			link_up = hw->mac.serdes_has_link;
> 			break;
> 
> 		default:
> 			break;
> 		}
>-		if (link_check || wait_to_complete == 0)
>+		if (link_up || wait_to_complete == 0)
> 			break;
> 		rte_delay_ms(EM_LINK_UPDATE_CHECK_INTERVAL);
> 	}
> 	memset(&link, 0, sizeof(link));
> 
> 	/* Now we check if a transition has happened */
>-	if (link_check && (link.link_status == ETH_LINK_DOWN)) {
>+	if (link_up) {
> 		uint16_t duplex, speed;
> 		hw->mac.ops.get_link_up_info(hw, &speed, &duplex);
> 		link.link_duplex = (duplex == FULL_DUPLEX) ?
>@@ -1167,7 +1167,7 @@ eth_em_link_update(struct rte_eth_dev *dev, int wait_to_complete)
> 		link.link_status = ETH_LINK_UP;
> 		link.link_autoneg = !(dev->data->dev_conf.link_speeds &
> 				ETH_LINK_SPEED_FIXED);
>-	} else if (!link_check && (link.link_status == ETH_LINK_UP)) {
>+	} else {
> 		link.link_speed = ETH_SPEED_NUM_NONE;
> 		link.link_duplex = ETH_LINK_HALF_DUPLEX;
> 		link.link_status = ETH_LINK_DOWN;
>-- 
>2.17.1
>


More information about the dev mailing list