[dpdk-dev] [PATCH v5] doc: clarify virtio PMD path selection

Yinan yinan.wang at intel.com
Wed Nov 27 16:19:52 CET 2019


From: Yinan Wang <yinan.wang at intel.com>

Add virtio paths selection and usage introduction for better
virtio usability.

Signed-off-by: Yinan Wang <yinan.wang at intel.com>
---
 doc/guides/howto/index.rst                    |   1 +
 .../virtio_paths_selection_and_usage.rst      | 126 ++++++++++++++++++
 2 files changed, 127 insertions(+)
 create mode 100644 doc/guides/howto/virtio_paths_selection_and_usage.rst

diff --git a/doc/guides/howto/index.rst b/doc/guides/howto/index.rst
index a4c131652..6edb8d5be 100644
--- a/doc/guides/howto/index.rst
+++ b/doc/guides/howto/index.rst
@@ -16,6 +16,7 @@ HowTo Guides
     vfd
     virtio_user_for_container_networking
     virtio_user_as_exceptional_path
+    virtio_paths_selection_and_usage
     packet_capture_framework
     telemetry
     debug_troubleshoot
diff --git a/doc/guides/howto/virtio_paths_selection_and_usage.rst b/doc/guides/howto/virtio_paths_selection_and_usage.rst
new file mode 100644
index 000000000..9bf7f8ef7
--- /dev/null
+++ b/doc/guides/howto/virtio_paths_selection_and_usage.rst
@@ -0,0 +1,126 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2019 Intel Corporation.
+
+Virtio paths Selection and Usage
+================================
+
+Logically virtio-PMD has 9 paths based on the combination of virtio features
+(Rx mergeable, In-order, Packed virtqueue), below is an introduction of these
+features:
+
+*   `Rx mergeable <https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/
+    virtio-v1.1-cs01.html#x1-2140004>`_: With this feature negotiated, device
+    can receive large packets by combining individual descriptors.
+*   `In-order <https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/
+    virtio-v1.1-cs01.html#x1-690008>`_: Some devices always use descriptors
+    in the same order in which they have been made available, these
+    devices can offer the VIRTIO_F_IN_ORDER feature. With this feature negotiated,
+    driver will use descriptors in order.
+*   `Packed virtqueue <https://docs.oasis-open.org/virtio/virtio/v1.1/cs01/
+    virtio-v1.1-cs01.html#x1-610007>`_: The structure of packed virtqueue is
+    different from split virtqueue, split virtqueue is composed of available ring,
+    used ring and descriptor table, while packed virtqueue is composed of descriptor
+    ring, driver event suppression and device event suppression. The idea behind
+    this is to improve performance by avoiding cache misses and make it easier
+    for hardware to implement.
+
+Virtio paths Selection
+----------------------
+
+If packed virtqueue is not negotiated, below split virtqueue paths will be selected
+according to below configuration:
+
+#. Split virtqueue mergeable path: If Rx mergeable is negotiated, in-order feature is
+   not negotiated, this path will be selected.
+#. Split virtqueue non-mergeable path: If Rx mergeable and in-order feature are not
+   negotiated, also Rx offload(s) are requested, this path will be selected.
+#. Split virtqueue in-order mergeable path: If Rx mergeable and in-order feature are
+   both negotiated, this path will be selected.
+#. Split virtqueue in-order non-mergeable path: If in-order feature is negotiated and
+   Rx mergeable is not negotiated, this path will be selected.
+#. Split virtqueue vectorized Rx path: If Rx mergeable is disabled and no Rx offload
+   requested, this path will be selected.
+
+If packed virtqueue is negotiated, below packed virtqueue paths will be selected
+according to below configuration:
+
+#. Packed virtqueue mergeable path: If Rx mergeable is negotiated, in-order feature
+   is not negotiated, this path will be selected.
+#. Packed virtqueue non-mergeable path: If Rx mergeable and in-order feature are not
+   negotiated, this path will be selected.
+#. Packed virtqueue in-order mergeable path: If in-order and Rx mergeable feature are
+   both negotiated, this path will be selected.
+#. Packed virtqueue in-order non-mergeable path: If in-order feature is negotiated and
+   Rx mergeable is not negotiated, this path will be selected.
+
+Rx/Tx callbacks of each Virtio path
+-----------------------------------
+
+Refer to above description, virtio path and corresponding Rx/Tx callbacks will
+be selected automatically. Rx callbacks and Tx callbacks for each virtio path
+are shown in below table:
+
+.. table:: Virtio Paths and Callbacks
+
+   ============================================ ================================= ========================
+                 Virtio paths                            Rx callbacks                   Tx callbacks
+   ============================================ ================================= ========================
+   Split virtqueue mergeable path               virtio_recv_mergeable_pkts        virtio_xmit_pkts
+   Split virtqueue non-mergeable path           virtio_recv_pkts                  virtio_xmit_pkts
+   Split virtqueue in-order mergeable path      virtio_recv_pkts_inorder          virtio_xmit_pkts_inorder
+   Split virtqueue in-order non-mergeable path  virtio_recv_pkts_inorder          virtio_xmit_pkts_inorder
+   Split virtqueue vectorized Rx path           virtio_recv_pkts_vec              virtio_xmit_pkts
+   Packed virtqueue mergeable path              virtio_recv_mergeable_pkts_packed virtio_xmit_pkts_packed
+   Packed virtqueue non-meregable path          virtio_recv_pkts_packed           virtio_xmit_pkts_packed
+   Packed virtqueue in-order mergeable path     virtio_recv_mergeable_pkts_packed virtio_xmit_pkts_packed
+   Packed virtqueue in-order non-mergeable path virtio_recv_pkts_packed           virtio_xmit_pkts_packed
+   ============================================ ================================= ========================
+
+Virtio paths Support Status from Release to Release
+---------------------------------------------------
+
+Virtio feature implementation:
+
+*   In-order feature is supported since DPDK 18.08 by adding new Rx/Tx callbacks
+    ``virtio_recv_pkts_inorder`` and ``virtio_xmit_pkts_inorder``.
+*   Packed virtqueue is supported since DPDK 19.02 by adding new Rx/Tx callbacks
+    ``virtio_recv_pkts_packed`` , ``virtio_recv_mergeable_pkts_packed`` and
+    ``virtio_xmit_pkts_packed``.
+
+All virtio paths support status are shown in below table:
+
+.. table:: Virtio Paths and Releases
+
+   ============================================ ============= ============= =============
+                  Virtio paths                  16.11 ~ 18.05 18.08 ~ 18.11 19.02 ~ 19.11
+   ============================================ ============= ============= =============
+   Split virtqueue mergeable path                     Y             Y             Y
+   Split virtqueue non-mergeable path                 Y             Y             Y
+   Split virtqueue vectorized Rx path                 Y             Y             Y
+   Split virtqueue simple Tx path                     Y             N             N
+   Split virtqueue in-order mergeable path                          Y             Y
+   Split virtqueue in-order non-mergeable path                      Y             Y
+   Packed virtqueue mergeable path                                                Y
+   Packed virtqueue non-mergeable path                                            Y
+   Packed virtqueue in-order mergeable path                                       Y
+   Packed virtqueue in-order non-mergeable path                                   Y
+   ============================================ ============= ============= =============
+
+QEMU Support Status
+-------------------
+
+*   Qemu now supports three paths of split virtqueue: Split virtqueue mergeable path,
+    Split virtqueue non-mergeable path, Split virtqueue vectorized Rx path.
+*   Since qemu 4.2.0, Packed virtqueue mergeable path and Packed virtqueue non-mergeable
+    path can be supported.
+
+How to Debug
+------------
+
+If you meet performance drop or some other issues after upgrading the driver
+or configuration, below steps can help you identify which path you selected and
+root cause faster.
+
+#. Run vhost/virtio test case;
+#. Run "perf top" and check virtio Rx/Tx callback names;
+#. Identify which virtio path is selected refer to above table.
-- 
2.17.1



More information about the dev mailing list