[dpdk-dev] [Bug 352] Bifurcated Driver X710 for ipv6 flow rule addition not working
bugzilla at dpdk.org
bugzilla at dpdk.org
Thu Oct 3 05:53:26 CEST 2019
https://bugs.dpdk.org/show_bug.cgi?id=352
Bug ID: 352
Summary: Bifurcated Driver X710 for ipv6 flow rule addition not
working
Product: DPDK
Version: unspecified
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: major
Priority: Normal
Component: examples
Assignee: dev at dpdk.org
Reporter: Muthurajan.Jayakumar at intel.com
Target Milestone: ---
We received X710 cards and were able to obtain connectivity! Thank you!
We were trying to setup flow bifurcation on the card for DPDK
(https://doc.dpdk.org/guides/howto/flow_bifurcation.html#using-flow-bifurcation-on-i40e-in-linux),
but it seems I cannot get an ip6 or tcp6 flow rule to be accepted via the i40e
driver. I keep getting “Cannot insert RX class rule: Invalid argument”
awang200# lshw -c network -businfo
Bus info Device Class Description
===================================================
pci at 0000:05:00.0 ens2f0 network NetXtreme BCM5720 Gigabit Ethernet PCIe
pci at 0000:05:00.1 ens2f1 network NetXtreme BCM5720 Gigabit Ethernet PCIe
pci at 0000:04:00.0 eno49 network NetXtreme II BCM57810 10 Gigabit
Ethernet
pci at 0000:04:00.1 eno50 network NetXtreme II BCM57810 10 Gigabit
Ethernet
pci at 0000:08:00.0 ens1f0 network Ethernet Controller X710 for 10GbE SFP+
pci at 0000:08:00.1 ens1f1 network Ethernet Controller X710 for 10GbE SFP+
pci at 0000:08:00.2 ens1f2 network Ethernet Controller X710 for 10GbE SFP+
pci at 0000:08:00.3 ens1f3 network Ethernet Controller X710 for 10GbE SFP+
pci at 0000:02:00.0 eno1 network NetXtreme BCM5719 Gigabit Ethernet PCIe
pci at 0000:02:00.1 eno2 network NetXtreme BCM5719 Gigabit Ethernet PCIe
pci at 0000:02:00.2 eno3 network NetXtreme BCM5719 Gigabit Ethernet PCIe
pci at 0000:02:00.3 eno4 network NetXtreme BCM5719 Gigabit Ethernet PCIe
docker0 network Ethernet interface
root at occam-gateway-14:/home/awang200# /usr/local/sbin/ethtool --version
ethtool version 5.2
root at occam-gateway-14:/home/awang200# /usr/local/sbin/ethtool -i ens1f0
driver: i40e
version: 2.9.21
firmware-version: 6.01 0x80003484 1.1747.0
expansion-rom-version:
bus-info: 0000:08:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
root at occam-gateway-14:/home/awang200# /usr/local/sbin/ethtool --show-ntuple
ens1f0
32 RX rings available
Total 0 rules
root at occam-gateway-14:/home/awang200# /usr/local/sbin/ethtool --config-ntuple
ens1f0 flow-type ip6 dst-ip 2001:558:feed:10:0:2:: user-def 0xffffffff00000000
action 0 loc 0
rmgr: Cannot insert RX class rule: Invalid argument
The README of i40e driver (version 2.9.21) still says that “NOTE: The Linux
i40e driver supports the following flow types: IPv4, TCPv4, and UDPv4.”
Would the XL710 card support IPv6 (TCPv6) flow types via some other mechanism?
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the dev
mailing list