[dpdk-dev] [PATCH 2/2] app/test: fix meson build when ring PMD is disabled

Bruce Richardson bruce.richardson at intel.com
Thu Oct 17 11:51:22 CEST 2019


On Thu, Oct 17, 2019 at 10:41:24AM +0100, Reshma Pattan wrote:
> pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter
> unit tests are dependent on ring PMD, so enable those
> tests only when ring PMD is enabled else ignore.
> 
> Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library")
> Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library")
> Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library")
> Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter")
> 
> CC: stable at dpdk.org
> CC: Nikhil Rao <nikhil.rao at intel.com>
> CC: Chas Williams <chas3 at att.com>
> 
> Reported-by: Stephen Hemminger <stephen at networkplumber.org>
> Signed-off-by: Reshma Pattan <reshma.pattan at intel.com>
> ---
>  app/test/meson.build | 33 +++++++++++++++++++--------------
>  1 file changed, 19 insertions(+), 14 deletions(-)
> 
> diff --git a/app/test/meson.build b/app/test/meson.build
> index 2c23c6347..43ae98b68 100644
> --- a/app/test/meson.build
> +++ b/app/test/meson.build
> @@ -7,13 +7,11 @@ endif
>  
>  test_sources = files('commands.c',
>  	'packet_burst_generator.c',
> -	'sample_packet_forward.c',
>  	'test.c',
>  	'test_acl.c',
>  	'test_alarm.c',
>  	'test_atomic.c',
>  	'test_barrier.c',
> -	'test_bitratestats.c',
>  	'test_bpf.c',
>  	'test_byteorder.c',
>  	'test_cmdline.c',
> @@ -43,7 +41,6 @@ test_sources = files('commands.c',
>  	'test_event_crypto_adapter.c',
>  	'test_event_eth_rx_adapter.c',
>  	'test_event_ring.c',
> -	'test_event_eth_tx_adapter.c',
>  	'test_event_timer_adapter.c',
>  	'test_eventdev.c',
>  	'test_external_mem.c',
> @@ -60,9 +57,7 @@ test_sources = files('commands.c',
>  	'test_ipsec.c',
>  	'test_kni.c',
>  	'test_kvargs.c',
> -	'test_latencystats.c',
>  	'test_link_bonding.c',
> -	'test_link_bonding_mode4.c',
>  	'test_link_bonding_rssconf.c',
>  	'test_logs.c',
>  	'test_lpm.c',
> @@ -83,11 +78,8 @@ test_sources = files('commands.c',
>  	'test_metrics.c',
>  	'test_mcslock.c',
>  	'test_mp_secondary.c',
> -	'test_pdump.c',
>  	'test_per_lcore.c',
>  	'test_pmd_perf.c',
> -	'test_pmd_ring.c',
> -	'test_pmd_ring_perf.c',
>  	'test_power.c',
>  	'test_power_cpufreq.c',
>  	'test_power_kvm_vm.c',
> @@ -199,7 +191,6 @@ fast_test_names = [
>          'rcu_qsbr_autotest',
>          'red_autotest',
>          'ring_autotest',
> -        'ring_pmd_autotest',
>          'rwlock_test1_autotest',
>          'rwlock_rda_autotest',
>          'rwlock_rds_wrm_autotest',
> @@ -214,7 +205,6 @@ fast_test_names = [
>          'timer_autotest',
>          'user_delay_us',
>          'version_autotest',
> -        'bitratestats_autotest',
>          'crc_autotest',
>          'delay_us_sleep_autotest',
>          'distributor_autotest',
> @@ -225,10 +215,8 @@ fast_test_names = [
>          'ipsec_autotest',
>          'kni_autotest',
>          'kvargs_autotest',
> -        'latencystats_autotest',
>          'member_autotest',
>          'metrics_autotest',
> -        'pdump_autotest',
>          'power_cpufreq_autotest',
>          'power_autotest',
>          'power_kvm_vm_autotest',
> @@ -258,7 +246,6 @@ perf_test_names = [
>          'rcu_qsbr_perf_autotest',
>          'red_perf',
>          'distributor_perf_autotest',
> -        'ring_pmd_perf_autotest',
>          'pmd_perf_autotest',
>          'stack_perf_autotest',
>          'stack_lf_perf_autotest',
> @@ -282,7 +269,6 @@ driver_test_names = [
>          'eventdev_selftest_octeontx',
>          'eventdev_selftest_sw',
>          'link_bonding_autotest',
> -        'link_bonding_mode4_autotest',
>          'link_bonding_rssconf_autotest',
>          'rawdev_autotest',
>  ]
> @@ -319,6 +305,10 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
>  endif
>  if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
>  	test_deps += 'pmd_ring'
> +	test_sources += 'test_pmd_ring_perf.c'
> +	test_sources += 'test_pmd_ring.c'
> +	fast_test_names += 'ring_pmd_autotest'
> +	perf_test_names += 'ring_pmd_perf_autotest'
>  endif
>  
>  if dpdk_conf.has('RTE_LIBRTE_POWER')
> @@ -354,6 +344,21 @@ if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
>  	driver_test_names += 'cryptodev_scheduler_autotest'
>  endif
>  
> +if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
> +	test_sources += 'test_event_eth_tx_adapter.c'
> +	test_sources += 'test_bitratestats.c'
> +	test_sources += 'test_latencystats.c'
> +	test_sources += 'test_link_bonding_mode4.c'
> +	test_sources += 'sample_packet_forward.c'
> +	fast_test_names += 'bitratestats_autotest'
> +	fast_test_names += 'latencystats_autotest'
> +	fast_test_names += 'link_bonding_mode4_autotest'
> +if dpdk_conf.has('RTE_LIBRTE_PDUMP')
> +	test_sources += 'test_pdump.c'
> +	fast_test_names += 'pdump_autotest'
> +endif
> +endif
> +

Why have two blocks for the same condition "dpdk_conf.has('...RING_PMD')"?
Can they not be merged?

Also, meson build does not allow disabling of particular libraries, so the
check for pdump enabling can be removed, I think. It's always built.

>  foreach d:test_deps
>  	def_lib = get_option('default_library')
>  	test_dep_objs += get_variable(def_lib + '_rte_' + d)
> -- 
> 2.21.0
> 


More information about the dev mailing list