[dpdk-dev] [PATCH v10] ethdev: add HIGIG2 key field to flow API

[Raslan Darawsheh]

Hi,

This patch broke the compilation of MLX5 PMD in debug mode:

                 from /root/dpdk/x86_64-native-linux-gcc/include/rte_ethdev_driver.h:18,
                 from /root/dpdk/drivers/net/mlx5/mlx5_mp.c:11:
/root/dpdk/x86_64-native-linux-gcc/include/rte_higig.h:112:2: error: type of bit-field 'opcode' is a GCC extension [-Werror=pedantic]
  uint16_t opcode:3;
  ^
/root/dpdk/x86_64-native-linux-gcc/include/rte_higig.h:113:2: error: type of bit-field 'resv1' is a GCC extension [-Werror=pedantic]
  uint16_t resv1:2;
  ^
/root/dpdk/x86_64-native-linux-gcc/include/rte_higig.h:114:2: error: type of bit-field 'src_t' is a GCC extension [-Werror=pedantic]
  uint16_t src_t:1;
  ^
/root/dpdk/x86_64-native-linux-gcc/include/rte_higig.h:115:2: error: type of bit-field 'pfm' is a GCC extension [-Werror=pedantic]
  uint16_t pfm:2;
  ^
/root/dpdk/x86_64-native-linux-gcc/include/rte_higig.h:116:2: error: type of bit-field 'resv2' is a GCC extension [-Werror=pedantic]
  uint16_t resv2:5;
  ^
/root/dpdk/x86_64-native-linux-gcc/include/rte_higig.h:117:2: error: type of bit-field 'hdr_ext_len' is a GCC extension [-Werror=pedantic]
  uint16_t hdr_ext_len:3;

and this is with gcc 4.8.5 

Kindest regards,
Raslan Darawsheh

> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Ferruh Yigit
> Sent: Tuesday, October 22, 2019 12:20 PM
> To: kirankumark at marvell.com; Adrien Mazarguil
> <adrien.mazarguil at 6wind.com>; Wenzhuo Lu <wenzhuo.lu at intel.com>;
> Jingjing Wu <jingjing.wu at intel.com>; Bernard Iremonger
> <bernard.iremonger at intel.com>; John McNamara
> <john.mcnamara at intel.com>; Marko Kovacevic
> <marko.kovacevic at intel.com>; Thomas Monjalon <thomas at monjalon.net>;
> Andrew Rybchenko <arybchenko at solarflare.com>; Olivier Matz
> <olivier.matz at 6wind.com>
> Cc: dev at dpdk.org; ajit.khaparde at broadcom.com
> Subject: Re: [dpdk-dev] [PATCH v10] ethdev: add HIGIG2 key field to flow
> API
> 
> On 10/22/2019 5:16 AM, kirankumark at marvell.com wrote:
> > From: Kiran Kumar K <kirankumark at marvell.com>
> >
> > Add new rte_flow_item_higig2_hdr in order to match higig2 header.
> > It is a layer 2.5 protocol and used in Broadcom switches.
> > Header format is based on the following document.
> >
> https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fread.p
> udn.com%2Fdownloads558%2Fdoc%2Fcomm%2F2301468%2FHiGig_protocol
> .pdf&data=02%7C01%7Crasland%40mellanox.com%7C316c5935a21b41ff
> 8e5708d756d10626%7Ca652971c7d2e4d9ba6a4d149256f461b%7C0%7C1%7C6
> 37073328075459541&sdata=3sL1lSFraI2KMD6UAJj%2FP2cFwloEflX1vNCY
> lv%2B4fG4%3D&reserved=0
> >
> > Signed-off-by: Kiran Kumar K <kirankumark at marvell.com>
> > Acked-by: Andrew Rybchenko <arybchenko at solarflare.com>
> > Acked-by: Olivier Matz <olivier.matz at 6wind.com>
> 
> Applied to dpdk-next-net/master, thanks.