[dpdk-dev] [RFC PATCH 00/13] add eventmode to ipsec-secgw

[Anoob Joseph]

Hi Konstantin,

Please see inline.

Thanks,
Anoob

> -----Original Message-----
> From: Ananyev, Konstantin <konstantin.ananyev at intel.com>
> Sent: Friday, October 25, 2019 3:10 PM
> To: Anoob Joseph <anoobj at marvell.com>; Akhil Goyal
> <akhil.goyal at nxp.com>; Nicolau, Radu <radu.nicolau at intel.com>
> Cc: Thomas Monjalon <thomas at monjalon.net>; Jerin Jacob Kollanukkaran
> <jerinj at marvell.com>; Narayana Prasad Raju Athreya
> <pathreya at marvell.com>; Lukas Bartosik <lbartosik at marvell.com>;
> dev at dpdk.org
> Subject: [EXT] RE: [dpdk-dev] [RFC PATCH 00/13] add eventmode to ipsec-
> secgw
> 
> External Email
> 
> ----------------------------------------------------------------------
> 
> <snip>
> 
> > > >
> > > > This series is targeted for next release (20.02). This series
> > > > doesn't introduce any library change.
> > >
> > > By 'library change' you mean that this new event-mode will be
> > > supported only by legacy code-path or ...?
> >
> > [Anoob] All the changes are confined to 'examples/ipsec-secgw'
> > directory. Right now, the worker threads make use of the existing routines
> in non-librte_ipsec mode.
> 
> And as I understand, you don't plan to use/support library mode?
> I suppose I need to look to the actual code to understand more here.

[Anoob] Supporting library mode is also in the pipeline. But initial target would be support with non-librte_ipsec mode.
 
> 
> >
> > >
> > > >And the decision to add eventmode additions in ipsec-secgw  was
> > > >approved by the Tech Board.
> > > >
> > > > Following are missing in the RFC. Will add it when sending patches.
> > > > 1. Documentation.
> > > > 2. More cleanup is needed. There are options that are added so that
> future
> > > >    expansion is not hindered. Need inputs from the community if
> > > > there is
> > > use
> > > >    case for them.
> > > >
> > > > Following are planned features,
> > > > 1. Add burst mode workers.
> > > > 2. Add non tx internal port worker.
> > > > 3. Verify support for Rx core (the support is added but lack of
> > > > h/w to
> > > verify).
> > > > 4. Add lookaside protocol support.
> > > >
> > > > Following are features that Marvell won't be attempting.
> > > > 1. Inline crypto support.
> > > > 2. Lookaside crypto support.
> > >
> > > Ok so what mode is supported right now with this RFC?
> >
> > [Anoob] Inline protocol support is added with the RFC.
> 
> Ok..., but  do we have within DPDK any PMD that implements inline-proto?
> AFAIK we don't, but might be I am missing something?

[Anoob] Inline protocol support would be added to OCTEON TX2 eth PMD in the next cycle. This is an RFC to introduce the idea of using events in ipsec-segcw, which is required for OCTEON TX2 platform to perform inline ipsec processing.

> 
> >
> > >
> > > >
> > > > For the features that Marvell won't be attempting, new workers can
> > > > be introduced by the respective stake holders.
> > > >
> > > > Anoob Joseph (13):
> > > >   examples/ipsec-secgw: add framework for eventmode helper
> > > >   examples/ipsec-secgw: add eventdev port-lcore link
> > > >   examples/ipsec-secgw: add Rx adapter support
> > > >   examples/ipsec-secgw: add Tx adapter support
> > > >   examples/ipsec-secgw: add routines to display config
> > > >   examples/ipsec-secgw: add routines to launch workers
> > > >   examples/ipsec-secgw: add support for internal ports
> > > >   examples/ipsec-secgw: add eventmode to ipsec-secgw
> > > >   examples/ipsec-secgw: add app inbound worker
> > > >   examples/ipsec-secgw: add app processing code
> > > >   examples/ipsec-secgw: add driver outbound worker
> > > >   examples/ipsec-secgw: add app outbound worker
> > > >   examples/ipsec-secgw: add cmd line option for bufs
> > > >
> > > >  examples/ipsec-secgw/Makefile       |    2 +
> > > >  examples/ipsec-secgw/event_helper.c | 1757
> > > > +++++++++++++++++++++++++++++++++++
> > > >  examples/ipsec-secgw/event_helper.h |  334 +++++++
> > > > examples/ipsec-secgw/ipsec-secgw.c  |  436 +++++++--
> > > >  examples/ipsec-secgw/ipsec-secgw.h  |   81 ++
> > > >  examples/ipsec-secgw/ipsec.c        |    4 +
> > > >  examples/ipsec-secgw/ipsec.h        |   30 +-
> > > >  examples/ipsec-secgw/ipsec_worker.c |  766 +++++++++++++++
> > > >  examples/ipsec-secgw/ipsec_worker.h |   39 +
> > > >  examples/ipsec-secgw/meson.build    |    4 +-
> > > >  examples/ipsec-secgw/sa.c           |   11 -
> > > >  11 files changed, 3360 insertions(+), 104 deletions(-)  create
> > > > mode
> > > > 100644 examples/ipsec-secgw/event_helper.c
> > > >  create mode 100644 examples/ipsec-secgw/event_helper.h
> > > >  create mode 100644 examples/ipsec-secgw/ipsec-secgw.h
> > > >  create mode 100644 examples/ipsec-secgw/ipsec_worker.c
> > > >  create mode 100644 examples/ipsec-secgw/ipsec_worker.h
> > > >
> > > > --
> > > > 2.7.4