[dpdk-dev] [PATCH v6 00/15] A new net PMD - hinic

Wangxiaoyun (Cloud, Network Chip Application Development Dept) cloud.wangxiaoyun at huawei.com
Tue Oct 29 07:43:04 CET 2019


Hi David ,
     Thanks for your comments, I check the test-report from dpdk.org(https://mails.dpdk.org/archives/test-report/2019-October/101893.html),
which shows hinic pmd driver passed meson build on FreeBSD12-64, also I analysize the building errs, pthread_mutex_consistent is defined
in <pthread.h> on FreeBSD and we also include this head file, I don't known why it also built failed, is there any changes about the configuration?

Best regards
Xiaoyun Wang

在 2019/10/26 22:43, David Marchand 写道:
> On Thu, Jun 27, 2019 at 4:26 PM Ferruh Yigit <ferruh.yigit at intel.com> wrote:
>> On 6/27/2019 9:10 AM, Ziyang Xuan wrote:
>>> This patch set adds support of a new net PMD
>>> for Huawei Intelligent nic. This patch provides supoort
>>> for basic RX/TX and the contorl path needed for it.
>>> Later on new features will be added like VLAN, VFs, etc.
>>>
>>> Basic features:
>>> 1. Basic device operations: probe, initialization, start/stop,
>>>     configure, info get.
>>> 2. RX/TX queue operations: setup/release, start/stop.
>>> 3. RX/TX.
>>>
>>> Stats:
>>> 1. statistics and extended  statistics.
>>>
>>> ---
>>> v2:
>>>   - Fix arm64 compilation issue.
>>>   - Fix some checkpatch checks issues
>>>   - Fix patches thread issue.
>>>   - Fit to the newest rte_ prefix patch
>>>
>>> v3:
>>>   - Remove Rami from hinic pmd maintainers
>>>   - Remove hinic_logs.* files and move log codes to other files
>>>   - Remove the C++ guards within hinic pmd codes
>>>   - Remove variable related errors shields from compilation files
>>>   - Use lib link statu related functions but selfdefined
>>>   - Fix x86_64-native-linuxapp-clang compilation errors
>>>   - Fix i686-native-linuxapp-gcc compilation errors
>>>
>>> v4:
>>>   - Update doc hinic.ini and hinic.rst
>>>   - Remove x86-32, i686, BSD, Power8, ARMv7 compilations
>>>   - Fit to newest IPV4 and IPV6 uppercase
>>>
>>> v5:
>>>   - Update doc hinic.rst and release_19_08.rst
>>>   - Delete unused codes
>>>   - Optimize arch of codes and delete unnecessary files
>>>   - Remove rte_panic
>>>   - Subdivided patches
>>>
>>> v6:
>>>   - Adjust hinic pmd maintainers
>>>   - Use "CONFIG_RTE_ARCH_X86_64" to determine X86_64 for SSE instruction
>>>   - Fix "check-git-log.sh" checking errors
>>>   - Move "hinic_pmd_ethdev.h" to patch 11/15, and
>>>     "hinic_pmd_rx.h"/"hinic_pmd_tx.h" to patch 12/15
>>>
>>> Ziyang Xuan (15):
>>>    net/hinic/base: add HW registers definition
>>>    net/hinic/base: add HW interfaces of bar operation
>>>    net/hinic/base: add API command channel code
>>>    net/hinic/base: add support for cmdq mechanism
>>>    net/hinic/base: add eq mechanism function code
>>>    net/hinic/base: add mgmt module function code
>>>    net/hinic/base: add code about hardware operation
>>>    net/hinic/base: add NIC business configurations
>>>    net/hinic/base: add context and work queue support
>>>    net/hinic/base: add various headers
>>>    net/hinic: add hinic PMD build and doc files
>>>    net/hinic: add device initailization
>>>    net/hinic: add start stop close queue ops
>>>    net/hinic: add Rx/Tx package burst
>>>    net/hinic: add RSS stats promiscuous ops
>> For series,
>> Reviewed-by: Ferruh Yigit <ferruh.yigit at intel.com>
>>
>> Series applied to dpdk-next-net/master, thanks.
>>
>>
>> This is first PMD from Huawei, welcome to dpdk, thanks for your efforts.
> This driver is explicitely disabled for FreeBSD with the make build framework.
> But I am getting a build error with meson on FreeBSD.
>
> ninja -C build-gcc-static
> ninja: Entering directory `build-gcc-static'
> [660/1372] Compiling C object
> 'drivers/net/hinic/base/12a4447@@hinic_base at sta/hinic_pmd_cmdq.c.o'.
> FAILED: drivers/net/hinic/base/12a4447@@hinic_base at sta/hinic_pmd_cmdq.c.o
> ccache gcc -Idrivers/net/hinic/base/12a4447@@hinic_base at sta
> -Idrivers/net/hinic/base -I../drivers/net/hinic/base -I. -I../
> -Iconfig -I../config -Ilib/librte_eal/common/include
> -I../lib/librte_eal/common/include
> -I../lib/librte_eal/freebsd/eal/include -Ilib/librte_eal/common
> -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86
> -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal
> -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs
> -Ilib/librte_ethdev -I../lib/librte_ethdev -Ilib/librte_net
> -I../lib/librte_net -Ilib/librte_mbuf -I../lib/librte_mbuf
> -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring
> -I../lib/librte_ring -Ilib/librte_meter -I../lib/librte_meter
> -Idrivers/bus/pci -I../drivers/bus/pci -I../drivers/bus/pci/bsd
> -Ilib/librte_pci -I../lib/librte_pci -Ilib/librte_hash
> -I../lib/librte_hash -fdiagnostics-color=always -pipe
> -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include
> rte_config.h -Wextra -Wcast-qual -Wdeprecated -Wformat-nonliteral
> -Wformat-security -Wmissing-declarations -Wmissing-prototypes
> -Wnested-externs -Wold-style-definition -Wpointer-arith -Wsign-compare
> -Wstrict-prototypes -Wundef -Wwrite-strings
> -Wno-missing-field-initializers -D_GNU_SOURCE -D__BSD_VISIBLE -fPIC
> -march=native -Wno-format-truncation -MD -MQ
> 'drivers/net/hinic/base/12a4447@@hinic_base at sta/hinic_pmd_cmdq.c.o'
> -MF 'drivers/net/hinic/base/12a4447@@hinic_base at sta/hinic_pmd_cmdq.c.o.d'
> -o 'drivers/net/hinic/base/12a4447@@hinic_base at sta/hinic_pmd_cmdq.c.o'
> -c ../drivers/net/hinic/base/hinic_pmd_cmdq.c
> In file included from ../drivers/net/hinic/base/hinic_pmd_cmdq.c:5:0:
> ../drivers/net/hinic/base/hinic_compat.h: In function 'hinic_mutex_lock':
> ../drivers/net/hinic/base/hinic_compat.h:263:9: error: implicit
> declaration of function 'pthread_mutex_consistent'; did you mean
> 'pthread_mutex_init'? [-Werror=implicit-function-declaration]
>     (void)pthread_mutex_consistent(pthreadmutex);
>           ^~~~~~~~~~~~~~~~~~~~~~~~
>           pthread_mutex_init
> ../drivers/net/hinic/base/hinic_compat.h:263:9: error: nested extern
> declaration of 'pthread_mutex_consistent' [-Werror=nested-externs]
> cc1: all warnings being treated as errors
>
> Please fix or disable compilation.
> Thanks.
>


More information about the dev mailing list