[dpdk-dev] [PATCH v2] net/ixgbe: fix macsec setting

Ye Xiaolong xiaolong.ye at intel.com
Tue Oct 29 10:03:06 CET 2019


On 10/29, Sun GuinanX wrote:
>macsec setting is not valid when port is stopped.
>In order to make it valid, the patch changes the setting
>to where port is started.
>
>Fixes: 597f9fafe13b ("app/testpmd: convert to new Tx offloads API")
>Cc: stable at dpdk.org
>
>Signed-off-by: Sun GuinanX <guinanx.sun at intel.com>
>---
>v2:
>* Modified function name
>* Refactored the rte_pmd_ixgbe_macsec_enable/disable function
>* Modified structure name
>* Modified the data type of a structure variable
>---
> drivers/net/ixgbe/ixgbe_ethdev.c  | 160 ++++++++++++++++++++++++++++++
> drivers/net/ixgbe/ixgbe_ethdev.h  |  15 +++
> drivers/net/ixgbe/rte_pmd_ixgbe.c | 127 ++----------------------
> 3 files changed, 182 insertions(+), 120 deletions(-)
>
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>index dbce7a80e..7ae7bc9ca 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.c
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>@@ -379,6 +379,11 @@ static int ixgbe_dev_udp_tunnel_port_del(struct rte_eth_dev *dev,
> static int ixgbe_filter_restore(struct rte_eth_dev *dev);
> static void ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
> 
>+static void ixgbe_dev_macsec_ctrl_register_enable(struct rte_eth_dev *dev,
>+		struct ixgbe_macsec_setting *macsec_contrl);
>+
>+static void ixgbe_dev_macsec_ctrl_register_disable(struct rte_eth_dev *dev);
>+
> /*
>  * Define VF Stats MACRO for Non "cleared on read" register
>  */
>@@ -2542,6 +2547,8 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
> 	uint32_t *link_speeds;
> 	struct ixgbe_tm_conf *tm_conf =
> 		IXGBE_DEV_PRIVATE_TO_TM_CONF(dev->data->dev_private);
>+	struct ixgbe_macsec_setting *macsec_ctrl =
>+		IXGBE_DEV_PRIVATE_TO_MACSEC_CTRL(dev->data->dev_private);
> 
> 	PMD_INIT_FUNC_TRACE();
> 
>@@ -2794,6 +2801,9 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
> 	 */
> 	ixgbe_dev_link_update(dev, 0);
> 
>+	/* setup the macsec ctrl register */
>+	ixgbe_dev_macsec_ctrl_register_enable(dev, macsec_ctrl);
>+
> 	return 0;
> 
> error:
>@@ -2825,6 +2835,9 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
> 
> 	PMD_INIT_FUNC_TRACE();
> 
>+	/* disable mecsec register */
>+	ixgbe_dev_macsec_ctrl_register_disable(dev);
>+
> 	rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
> 
> 	/* disable interrupts */
>@@ -8816,6 +8829,153 @@ ixgbe_clear_all_l2_tn_filter(struct rte_eth_dev *dev)
> 	return 0;
> }
> 
>+/* macsec ctrl setup enable */

This comment is not aligned with the function name, actually since this function
is quite straightforward, the comment is unnecessary.

>+void
>+ixgbe_dev_macsec_setting_save(struct rte_eth_dev *dev,
>+				struct ixgbe_macsec_setting *macsec_ctrl)
>+{
>+	struct ixgbe_macsec_setting *macsec =
>+		IXGBE_DEV_PRIVATE_TO_MACSEC_CTRL(dev->data->dev_private);
>+
>+	macsec->encrypt_en = macsec_ctrl->encrypt_en;
>+	macsec->replayprotect_en = macsec_ctrl->replayprotect_en;
>+}
>+
>+/* macsec ctrl setup disable */

ditto

>+void
>+ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev)
>+{
>+	struct ixgbe_macsec_setting *macsec =
>+		IXGBE_DEV_PRIVATE_TO_MACSEC_CTRL(dev->data->dev_private);
>+
>+	macsec->encrypt_en = 0;
>+	macsec->replayprotect_en = 0;
>+}
>+
>+/* macsec ctrl register set */
>+static void
>+ixgbe_dev_macsec_ctrl_register_enable(struct rte_eth_dev *dev,
>+				struct ixgbe_macsec_setting *macsec_contrl)
>+{
>+	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>+	uint32_t ctrl;
>+	uint8_t en = (uint8_t)macsec_contrl->encrypt_en;
>+	uint8_t rp = (uint8_t)macsec_contrl->replayprotect_en;
>+
>+	/**
>+	 * Workaround:
>+	 * As no ixgbe_disable_sec_rx_path equivalent is
>+	 * implemented for tx in the base code, and we are
>+	 * not allowed to modify the base code in DPDK, so
>+	 * just call the hand-written one directly for now.
>+	 * The hardware support has been checked by
>+	 * ixgbe_disable_sec_rx_path().
>+	 */
>+	ixgbe_disable_sec_tx_path_generic(hw);
>+
>+	/* Enable Ethernet CRC (required by MACsec offload) */
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_HLREG0);
>+	ctrl |= IXGBE_HLREG0_TXCRCEN | IXGBE_HLREG0_RXCRCSTRP;
>+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, ctrl);
>+
>+	/* Enable the TX and RX crypto engines */
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
>+	ctrl &= ~IXGBE_SECTXCTRL_SECTX_DIS;
>+	IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
>+
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
>+	ctrl &= ~IXGBE_SECRXCTRL_SECRX_DIS;
>+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
>+
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
>+	ctrl &= ~IXGBE_SECTX_MINSECIFG_MASK;
>+	ctrl |= 0x3;
>+	IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, ctrl);
>+
>+	/* Enable SA lookup */
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
>+	ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
>+	ctrl |= en ? IXGBE_LSECTXCTRL_AUTH_ENCRYPT :
>+		     IXGBE_LSECTXCTRL_AUTH;
>+	ctrl |= IXGBE_LSECTXCTRL_AISCI;
>+	ctrl &= ~IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>+	ctrl |= IXGBE_MACSEC_PNTHRSH & IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>+	IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
>+
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
>+	ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
>+	ctrl |= IXGBE_LSECRXCTRL_STRICT << IXGBE_LSECRXCTRL_EN_SHIFT;
>+	ctrl &= ~IXGBE_LSECRXCTRL_PLSH;
>+	if (rp)
>+		ctrl |= IXGBE_LSECRXCTRL_RP;
>+	else
>+		ctrl &= ~IXGBE_LSECRXCTRL_RP;
>+	IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
>+
>+	/* Start the data paths */
>+	ixgbe_enable_sec_rx_path(hw);
>+	/**
>+	 * Workaround:
>+	 * As no ixgbe_enable_sec_rx_path equivalent is
>+	 * implemented for tx in the base code, and we are
>+	 * not allowed to modify the base code in DPDK, so
>+	 * just call the hand-written one directly for now.
>+	 */
>+	ixgbe_enable_sec_tx_path_generic(hw);
>+}
>+
>+/* macsec ctrl register set */
>+static void
>+ixgbe_dev_macsec_ctrl_register_disable(struct rte_eth_dev *dev)
>+{
>+	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>+	uint32_t ctrl;
>+
>+	/**
>+	 * Workaround:
>+	 * As no ixgbe_disable_sec_rx_path equivalent is
>+	 * implemented for tx in the base code, and we are
>+	 * not allowed to modify the base code in DPDK, so
>+	 * just call the hand-written one directly for now.
>+	 * The hardware support has been checked by
>+	 * ixgbe_disable_sec_rx_path().
>+	 */
>+	ixgbe_disable_sec_tx_path_generic(hw);
>+
>+	/* Disable the TX and RX crypto engines */
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
>+	ctrl |= IXGBE_SECTXCTRL_SECTX_DIS;
>+	IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
>+
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
>+	ctrl |= IXGBE_SECRXCTRL_SECRX_DIS;
>+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
>+
>+	/* Disable SA lookup */
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
>+	ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
>+	ctrl |= IXGBE_LSECTXCTRL_DISABLE;
>+	IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
>+
>+	ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
>+	ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
>+	ctrl |= IXGBE_LSECRXCTRL_DISABLE << IXGBE_LSECRXCTRL_EN_SHIFT;
>+	IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
>+
>+	/* Start the data paths */
>+	ixgbe_enable_sec_rx_path(hw);
>+	/**
>+	 * Workaround:
>+	 * As no ixgbe_enable_sec_rx_path equivalent is
>+	 * implemented for tx in the base code, and we are
>+	 * not allowed to modify the base code in DPDK, so
>+	 * just call the hand-written one directly for now.
>+	 */
>+	ixgbe_enable_sec_tx_path_generic(hw);
>+}
>+
>+
>+

One empty line is enough here.

> RTE_PMD_REGISTER_PCI(net_ixgbe, rte_ixgbe_pmd);
> RTE_PMD_REGISTER_PCI_TABLE(net_ixgbe, pci_id_ixgbe_map);
> RTE_PMD_REGISTER_KMOD_DEP(net_ixgbe, "* igb_uio | uio_pci_generic | vfio-pci");
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
>index 6e9ed2e10..6aa2cdbbc 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.h
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
>@@ -365,6 +365,12 @@ struct rte_flow {
> 	void *rule;
> };
> 
>+/* MACsec Control structure */

Comment is unaligned and unnecessary.

>+struct ixgbe_macsec_setting {
>+	uint8_t encrypt_en;		/* encrypt enabled */
>+	uint8_t replayprotect_en;	/* replayprotect enabled */
>+};
>+
> /*
>  * Statistics counters collected by the MACsec
>  */
>@@ -471,6 +477,7 @@ struct ixgbe_adapter {
> 	struct ixgbe_hw             hw;
> 	struct ixgbe_hw_stats       stats;
> 	struct ixgbe_macsec_stats   macsec_stats;
>+	struct ixgbe_macsec_setting	macsec_ctrl;
> 	struct ixgbe_hw_fdir_info   fdir;
> 	struct ixgbe_interrupt      intr;
> 	struct ixgbe_stat_mapping_registers stat_mappings;
>@@ -523,6 +530,9 @@ int ixgbe_vf_representor_uninit(struct rte_eth_dev *ethdev);
> #define IXGBE_DEV_PRIVATE_TO_MACSEC_STATS(adapter) \
> 	(&((struct ixgbe_adapter *)adapter)->macsec_stats)
> 
>+#define IXGBE_DEV_PRIVATE_TO_MACSEC_CTRL(adapter) \
>+	(&((struct ixgbe_adapter *)adapter)->macsec_ctrl)
>+
> #define IXGBE_DEV_PRIVATE_TO_INTR(adapter) \
> 	(&((struct ixgbe_adapter *)adapter)->intr)
> 
>@@ -741,6 +751,11 @@ int ixgbe_action_rss_same(const struct rte_flow_action_rss *comp,
> int ixgbe_config_rss_filter(struct rte_eth_dev *dev,
> 		struct ixgbe_rte_flow_rss_conf *conf, bool add);
> 
>+void ixgbe_dev_macsec_setting_save(struct rte_eth_dev *dev,
>+		struct ixgbe_macsec_setting *macsec_ctrl);
>+
>+void ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev);
>+
> static inline int
> ixgbe_ethertype_filter_lookup(struct ixgbe_filter_info *filter_info,
> 			      uint16_t ethertype)
>diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c b/drivers/net/ixgbe/rte_pmd_ixgbe.c
>index 9514f2cf5..3a1474876 100644
>--- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
>+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
>@@ -515,82 +515,18 @@ rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf,
> int
> rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp)
> {

I think there is usercase when dev is started, and user calls
rte_pmd_ixgbe_macsec_enable and he expects it will take effect, so we still
need to configure register (call ixgbe_dev_macsec_ctrl_register_enable) here
other than just caching the macsec setting.

>-	struct ixgbe_hw *hw;
> 	struct rte_eth_dev *dev;
>-	uint32_t ctrl;
>+	struct ixgbe_macsec_setting macsec_setting;
> 
> 	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
> 
> 	dev = &rte_eth_devices[port];
> 
>-	if (!is_ixgbe_supported(dev))
>-		return -ENOTSUP;
>-
>-	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>+	macsec_setting.encrypt_en = en;
>+	macsec_setting.replayprotect_en = rp;
> 
>-	/* Stop the data paths */
>-	if (ixgbe_disable_sec_rx_path(hw) != IXGBE_SUCCESS)
>-		return -ENOTSUP;
>-	/**
>-	 * Workaround:
>-	 * As no ixgbe_disable_sec_rx_path equivalent is
>-	 * implemented for tx in the base code, and we are
>-	 * not allowed to modify the base code in DPDK, so
>-	 * just call the hand-written one directly for now.
>-	 * The hardware support has been checked by
>-	 * ixgbe_disable_sec_rx_path().
>-	 */
>-	ixgbe_disable_sec_tx_path_generic(hw);
>-
>-	/* Enable Ethernet CRC (required by MACsec offload) */
>-	ctrl = IXGBE_READ_REG(hw, IXGBE_HLREG0);
>-	ctrl |= IXGBE_HLREG0_TXCRCEN | IXGBE_HLREG0_RXCRCSTRP;
>-	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, ctrl);
>-
>-	/* Enable the TX and RX crypto engines */
>-	ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
>-	ctrl &= ~IXGBE_SECTXCTRL_SECTX_DIS;
>-	IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
>-
>-	ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
>-	ctrl &= ~IXGBE_SECRXCTRL_SECRX_DIS;
>-	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
>-
>-	ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
>-	ctrl &= ~IXGBE_SECTX_MINSECIFG_MASK;
>-	ctrl |= 0x3;
>-	IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, ctrl);
>-
>-	/* Enable SA lookup */
>-	ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
>-	ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
>-	ctrl |= en ? IXGBE_LSECTXCTRL_AUTH_ENCRYPT :
>-		     IXGBE_LSECTXCTRL_AUTH;
>-	ctrl |= IXGBE_LSECTXCTRL_AISCI;
>-	ctrl &= ~IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>-	ctrl |= IXGBE_MACSEC_PNTHRSH & IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>-	IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
>-
>-	ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
>-	ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
>-	ctrl |= IXGBE_LSECRXCTRL_STRICT << IXGBE_LSECRXCTRL_EN_SHIFT;
>-	ctrl &= ~IXGBE_LSECRXCTRL_PLSH;
>-	if (rp)
>-		ctrl |= IXGBE_LSECRXCTRL_RP;
>-	else
>-		ctrl &= ~IXGBE_LSECRXCTRL_RP;
>-	IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
>-
>-	/* Start the data paths */
>-	ixgbe_enable_sec_rx_path(hw);
>-	/**
>-	 * Workaround:
>-	 * As no ixgbe_enable_sec_rx_path equivalent is
>-	 * implemented for tx in the base code, and we are
>-	 * not allowed to modify the base code in DPDK, so
>-	 * just call the hand-written one directly for now.
>-	 */
>-	ixgbe_enable_sec_tx_path_generic(hw);
>+	/* Enable macsec setup  */
>+	ixgbe_dev_macsec_setting_save(dev, &macsec_setting);
> 
> 	return 0;
> }
>@@ -598,63 +534,14 @@ rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp)
> int
> rte_pmd_ixgbe_macsec_disable(uint16_t port)
> {

Ditto.

Thanks,
Xiaolong


More information about the dev mailing list