[dpdk-dev] [PATCH v3] net/ipn3ke: setup MTU when HW init
Pei, Andy
andy.pei at intel.com
Tue Sep 3 04:34:17 CEST 2019
HI Xiaolong,
Reply inline.
-----Original Message-----
From: Ye, Xiaolong
Sent: Monday, September 2, 2019 5:24 PM
To: Pei, Andy <andy.pei at intel.com>
Cc: dev at dpdk.org; Zhang, Qi Z <qi.z.zhang at intel.com>; Yigit, Ferruh <ferruh.yigit at intel.com>; Xu, Rosen <rosen.xu at intel.com>
Subject: Re: [PATCH v3] net/ipn3ke: setup MTU when HW init
Hi, Andy
On 09/02, Andy Pei wrote:
>set up mtu to the minimun in tx mtu, rx mtu and IPN3KE_MAC_FRAME_SIZE_MAX.
>
>Signed-off-by: Andy Pei <andy.pei at intel.com>
>---
>Cc: qi.z.zhang at intel.com
>Cc: ferruh.yigit at intel.com
>Cc: rosen.xu at intel.com
>Cc: xiaolong.ye at intel.com
>
>v2:
>modify low bound and upper bound.
>
>v3:
>modify according to community comments.
Better to put more details about your changes other than the vague description.
OK
>
> drivers/net/ipn3ke/ipn3ke_ethdev.c | 109
> +++++++++++++++++++++++++++++++++++++
> drivers/net/ipn3ke/ipn3ke_ethdev.h | 15 +++++
> 2 files changed, 124 insertions(+)
>
>diff --git a/drivers/net/ipn3ke/ipn3ke_ethdev.c
>b/drivers/net/ipn3ke/ipn3ke_ethdev.c
>index c226d63..711d48e 100644
>--- a/drivers/net/ipn3ke/ipn3ke_ethdev.c
>+++ b/drivers/net/ipn3ke/ipn3ke_ethdev.c
>@@ -209,6 +209,112 @@
> return 0;
> }
>
>+static uint32_t
>+ipn3ke_mtu_cal(uint32_t tx, uint32_t rx) {
>+ uint32_t tmp;
>+ tmp = RTE_MIN(tx, rx);
>+ if (tmp < RTE_ETHER_MIN_MTU)
>+ tmp = RTE_ETHER_MIN_MTU;
tmp = RTE_MAX(tmp, RTE_ETHER_MIN_MTU);
>+ if (tmp > IPN3KE_MAC_FRAME_SIZE_MAX - IPN3KE_ETH_OVERHEAD)
>+ tmp = IPN3KE_MAC_FRAME_SIZE_MAX - IPN3KE_ETH_OVERHEAD;
tmp = RTE_MIN(tmp, IPN3KE_MAC_FRAME_SIZE_MAX - IPN3KE_ETH_OVERHEAD);
in the definition of TRE_MIN and TRE_MAX, typeof() is used.
RTE_ETHER_MIN_MTU is MACRO, your expression cause complie issue.
>+ return tmp;
>+}
>+
>+static void
>+ipn3ke_10G_mtu_setup
>+(struct ipn3ke_hw *hw, uint32_t mac_num, uint32_t eth_group_sel) {
>+ uint32_t tx;
>+ uint32_t rx;
>+ uint32_t tmp;
>+
>+ if (!(*hw->f_mac_read) || !(*hw->f_mac_write))
>+ return;
>+
>+ (*hw->f_mac_read)(hw,
>+ &tx,
>+ IPN3KE_10G_TX_FRAME_MAXLENGTH,
>+ mac_num,
>+ eth_group_sel);
>+
>+ (*hw->f_mac_read)(hw,
>+ &rx,
>+ IPN3KE_10G_RX_FRAME_MAXLENGTH,
>+ mac_num,
>+ eth_group_sel);
>+
>+ tmp = ipn3ke_mtu_cal(tx, rx);
>+
>+ (*hw->f_mac_write)(hw,
>+ tmp,
>+ IPN3KE_10G_TX_FRAME_MAXLENGTH,
>+ mac_num,
>+ eth_group_sel);
>+
>+ (*hw->f_mac_write)(hw,
>+ tmp,
>+ IPN3KE_10G_RX_FRAME_MAXLENGTH,
>+ mac_num,
>+ eth_group_sel);
>+}
>+
>+static void
>+ipn3ke_25G_mtu_setup
>+(struct ipn3ke_hw *hw, uint32_t mac_num, uint32_t eth_group_sel) {
>+ uint32_t tx;
>+ uint32_t rx;
>+ uint32_t tmp;
>+
>+ if (!(*hw->f_mac_read) || !(*hw->f_mac_write))
>+ return;
>+
>+ (*hw->f_mac_read)(hw,
>+ &tx,
>+ IPN3KE_25G_MAX_TX_SIZE_CONFIG,
>+ mac_num,
>+ eth_group_sel);
>+
>+ (*hw->f_mac_read)(hw,
>+ &rx,
>+ IPN3KE_25G_MAX_RX_SIZE_CONFIG,
>+ mac_num,
>+ eth_group_sel);
>+
>+ tmp = ipn3ke_mtu_cal(tx, rx);
>+
>+ (*hw->f_mac_write)(hw,
>+ tmp,
>+ IPN3KE_25G_MAX_TX_SIZE_CONFIG,
>+ mac_num,
>+ eth_group_sel);
>+
>+ (*hw->f_mac_write)(hw,
>+ tmp,
>+ IPN3KE_25G_MAX_RX_SIZE_CONFIG,
>+ mac_num,
>+ eth_group_sel);
>+}
Above 2 functions still share lots of duplicated code, can you extract the duplicated code to a common function?
OK
>+
>+static void
>+ipn3ke_mtu_setup(struct ipn3ke_hw *hw) {
>+ int i;
>+ if (hw->retimer.mac_type == IFPGA_RAWDEV_RETIMER_MAC_TYPE_10GE_XFI) {
>+ for (i = 0; i < hw->port_num; i++) {
>+ ipn3ke_10G_mtu_setup(hw, i, 0);
>+ ipn3ke_10G_mtu_setup(hw, i, 1);
>+ }
>+ } else if (hw->retimer.mac_type ==
>+ IFPGA_RAWDEV_RETIMER_MAC_TYPE_25GE_25GAUI) {
>+ for (i = 0; i < hw->port_num; i++) {
>+ ipn3ke_25G_mtu_setup(hw, i, 0);
>+ ipn3ke_25G_mtu_setup(hw, i, 1);
>+ }
>+ }
>+}
>+
> static int
> ipn3ke_hw_init(struct rte_afu_device *afu_dev,
> struct ipn3ke_hw *hw)
>@@ -303,6 +409,9 @@
> }
> }
>
>+ /* init mtu */
>+ ipn3ke_mtu_setup(hw);
>+
> ret = rte_eth_switch_domain_alloc(&hw->switch_domain_id);
> if (ret)
> IPN3KE_AFU_PMD_WARN("failed to allocate switch domain for device
>%d", diff --git a/drivers/net/ipn3ke/ipn3ke_ethdev.h
>b/drivers/net/ipn3ke/ipn3ke_ethdev.h
>index c7b336b..596df08 100644
>--- a/drivers/net/ipn3ke/ipn3ke_ethdev.h
>+++ b/drivers/net/ipn3ke/ipn3ke_ethdev.h
>@@ -654,6 +654,21 @@ static inline void _ipn3ke_indrct_write(struct
>ipn3ke_hw *hw, #define IPN3KE_MAC_RX_FRAME_MAXLENGTH_MASK \
> IPN3KE_MASK(0xFFFF, IPN3KE_MAC_RX_FRAME_MAXLENGTH_SHIFT)
>
>+/* Additional Feature Register */
>+#define ADD_PHY_CTRL 0x0
>+#define PHY_RESET BIT(0)
>+/* registers for 25G/40G mac */
>+#define MAC_CONFIG 0x310
>+#define MAC_RESET_MASK GENMASK(2, 0)
>+
>+#define IPN3KE_MAX_MTU 0xffff
>+
>+#define IPN3KE_25G_MAX_TX_SIZE_CONFIG 0x407
>+#define IPN3KE_25G_MAX_RX_SIZE_CONFIG 0x506
>+
>+#define IPN3KE_10G_TX_FRAME_MAXLENGTH 0x002C
>+#define IPN3KE_10G_RX_FRAME_MAXLENGTH 0x00AE
>+
It's better to remove unused MACROs here to make the patch clean.
OK
Thanks,
Xiaolong
> #define IPN3KE_REGISTER_WIDTH 32
>
> /*Bits[2:0]: Configuration of TX statistics counters:
>--
>1.8.3.1
>
More information about the dev
mailing list