[dpdk-dev] [PATCH v4 5/7] net/mlx5: support modify VLAN priority on VLAN hdr
Moti Haimovsky
motih at mellanox.com
Tue Sep 3 17:13:24 CEST 2019
This commit adds support for modifying the VLAN priority (PCP) field
in about-to-be-pushed VLAN header.
This feature can only modify the PCP field of a new VLAN header yet
to be pushed. It does not support modifying an existing or already
pushed VLAN headers.
Signed-off-by: Moti Haimovsky <motih at mellanox.com>
---
v4:
- Fixed typo in an error message.
---
doc/guides/nics/mlx5.rst | 5 ++-
doc/guides/rel_notes/release_19_11.rst | 1 +
drivers/net/mlx5/mlx5_flow_dv.c | 58 ++++++++++++++++++++++++++++++++++
3 files changed, 63 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index bb1e102..98a0d43 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -131,6 +131,8 @@ Limitations
- VLAN push offload is not supported on ingress traffic.
+- VLAN set PCP offload is not supported on existing headers.
+
- A multi segment packet must have not more segments than reported by dev_infos_get()
in tx_desc_lim.nb_seg_max field. This value depends on maximal supported Tx descriptor
size and ``txq_inline_min`` settings and may be from 2 (worst case forced by maximal
@@ -1041,7 +1043,8 @@ Supported hardware offloads
+-----------------------+-----------------+-----------------+
| | VLAN | | DPDK 19.11 | | DPDK 19.11 |
| | (of_pop_vlan / | | OFED 4.6-4 | | OFED 4.6-4 |
- | | of_push_vlan) | | ConnectX-5 | | ConnectX-5 |
+ | | of_push_vlan / | | ConnectX-5 | | ConnectX-5 |
+ | | of_set_vlan_pcp) | | |
+-----------------------+-----------------+-----------------+
Notes for testpmd
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index afe92ab..5067a1c 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -229,4 +229,5 @@ Tested Platforms
* Added support for VLAN pop flow offload command.
* Added support for VLAN push flow offload command.
+ * Added support for VLAN set PCP offload command.
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 3a92846..f70e655 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -967,6 +967,47 @@ struct field_modify_info modify_tcp[] = {
}
/**
+ * Validate the set VLAN PCP.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] actions
+ * Pointer to the list of actions remaining in the flow rule.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_set_vlan_pcp(uint64_t action_flags,
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action *action = actions;
+ const struct rte_flow_action_of_set_vlan_pcp *conf = action->conf;
+
+ if (conf->vlan_pcp > 7)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "VLAN PCP value is too big");
+ if (mlx5_flow_find_action(actions,
+ RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN) == NULL)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "set VLAN PCP can only be used "
+ "with push VLAN action");
+ if (action_flags & MLX5_FLOW_ACTION_OF_PUSH_VLAN)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "set VLAN PCP action must precede "
+ "the push VLAN action");
+ return 0;
+}
+
+/**
* Validate count action.
*
* @param[in] dev
@@ -3383,6 +3424,13 @@ struct field_modify_info modify_tcp[] = {
action_flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
++actions_n;
break;
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
+ ret = flow_dv_validate_action_set_vlan_pcp
+ (action_flags, actions, error);
+ if (ret < 0)
+ return ret;
+ /* Count PCP with push_vlan command. */
+ break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
ret = flow_dv_validate_action_l2_encap(action_flags,
@@ -4973,6 +5021,7 @@ struct field_modify_info modify_tcp[] = {
void *match_mask = matcher.mask.buf;
void *match_value = dev_flow->dv.value.buf;
uint8_t next_protocol = 0xff;
+ uint16_t vlan_tci;
struct flow_dv_vlan_be vlan = { 0 };
flow_dev_get_vlan_info_from_items(items, &vlan);
@@ -5100,6 +5149,15 @@ struct field_modify_info modify_tcp[] = {
dev_flow->dv.push_vlan_res->action;
action_flags |= MLX5_FLOW_ACTION_OF_PUSH_VLAN;
break;
+ case RTE_FLOW_ACTION_TYPE_OF_SET_VLAN_PCP:
+ vlan_tci =
+ ((const struct rte_flow_action_of_set_vlan_pcp *)
+ actions->conf)->vlan_pcp;
+ vlan_tci = vlan_tci << FLOW_DV_VLAN_PCP_SHIFT;
+ vlan.tci &= ~FLOW_DV_VLAN_PCP_MASK;
+ vlan.tci |= rte_cpu_to_be_16(vlan_tci);
+ /* Push VLAN command will use this value */
+ break;
case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
if (flow_dv_create_action_l2_encap(dev, actions,
--
1.8.3.1
More information about the dev
mailing list