[dpdk-dev] [PATCH] ethdev: fix typos for ENOTSUP
Ferruh Yigit
ferruh.yigit at intel.com
Thu Sep 5 19:11:48 CEST 2019
On 9/4/2019 3:59 PM, Stephen Hemminger wrote:
> On Wed, 4 Sep 2019 22:05:31 +0800
> Xiaolong Ye <xiaolong.ye at intel.com> wrote:
>
>> Fixes: af75078fece3 ("first public release")
>> Cc: stable at dpdk.org
>>
>> Signed-off-by: Xiaolong Ye <xiaolong.ye at intel.com>
>> ---
>> lib/librte_ethdev/rte_ethdev.h | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
>> index dc6596bc9..51e2caf79 100644
>> --- a/lib/librte_ethdev/rte_ethdev.h
>> +++ b/lib/librte_ethdev/rte_ethdev.h
>> @@ -2477,7 +2477,7 @@ int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu);
>> * Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*.
>> * @return
>> * - (0) if successful.
>> - * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
>> + * - (-ENOTSUP) if hardware-assisted VLAN filtering not configured.
>> * - (-ENODEV) if *port_id* invalid.
>> * - (-EIO) if device is removed.
>> * - (-ENOSYS) if VLAN filtering on *port_id* disabled.
>> @@ -2500,7 +2500,7 @@ int rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on);
>> * If 0, Disable VLAN Stripping of the receive queue of the Ethernet port.
>> * @return
>> * - (0) if successful.
>> - * - (-ENOSUP) if hardware-assisted VLAN stripping not configured.
>> + * - (-ENOTSUP) if hardware-assisted VLAN stripping not configured.
>> * - (-ENODEV) if *port_id* invalid.
>> * - (-EINVAL) if *rx_queue_id* invalid.
>> */
>> @@ -2520,7 +2520,7 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint16_t port_id, uint16_t rx_queue_id,
>> * The Tag Protocol ID
>> * @return
>> * - (0) if successful.
>> - * - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
>> + * - (-ENOTSUP) if hardware-assisted VLAN TPID setup is not supported.
>> * - (-ENODEV) if *port_id* invalid.
>> * - (-EIO) if device is removed.
>> */
>> @@ -2546,7 +2546,7 @@ int rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
>> * ETH_QINQ_STRIP_OFFLOAD
>> * @return
>> * - (0) if successful.
>> - * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
>> + * - (-ENOTSUP) if hardware-assisted VLAN filtering not configured.
>> * - (-ENODEV) if *port_id* invalid.
>> * - (-EIO) if device is removed.
>> */
>
> Acked-by: Stephen Hemminger <stephen at networkplumber.org>
>
Reviewed-by: Ferruh Yigit <ferruh.yigit at intel.com>
Applied to dpdk-next-net/master, thanks.
More information about the dev
mailing list