[dpdk-dev] [PATCH v5 3/7] net/mlx5: support pop flow action on VLAN header
Slava Ovsiienko
viacheslavo at mellanox.com
Tue Sep 10 10:13:02 CEST 2019
> -----Original Message-----
> From: Moti Haimovsky <motih at mellanox.com>
> Sent: Monday, September 9, 2019 18:57
> To: Slava Ovsiienko <viacheslavo at mellanox.com>; Raslan Darawsheh
> <rasland at mellanox.com>
> Cc: dev at dpdk.org
> Subject: [PATCH v5 3/7] net/mlx5: support pop flow action on VLAN header
>
> This commit adds support for RTE_FLOW_ACTION_TYPE_OF_POP_VLAN via
> direct verbs flow rules.
>
> Signed-off-by: Moti Haimovsky <motih at mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo at mellanox.com>
> ---
> doc/guides/nics/mlx5.rst | 10 +++++
> doc/guides/rel_notes/release_19_11.rst | 6 +++
> drivers/net/mlx5/mlx5.c | 9 ++++
> drivers/net/mlx5/mlx5.h | 2 +
> drivers/net/mlx5/mlx5_flow.h | 5 ++-
> drivers/net/mlx5/mlx5_flow_dv.c | 78
> ++++++++++++++++++++++++++++++++++
> 6 files changed, 109 insertions(+), 1 deletion(-)
>
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index
> 4115520..2ae2e8f 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -124,6 +124,12 @@ Limitations
>
> Will match any ipv4 packet (VLAN included).
>
> +- VLAN pop offload command:
> +
> + - Flow rules having a VLAN pop offload command as one of their actions
> and
> + are lacking a match on VLAN as one of their items are not supported.
> + - The command is not supported on egress traffic.
> +
> - A multi segment packet must have not more segments than reported by
> dev_infos_get()
> in tx_desc_lim.nb_seg_max field. This value depends on maximal supported
> Tx descriptor
> size and ``txq_inline_min`` settings and may be from 2 (worst case forced
> by maximal @@ -1032,6 +1038,10 @@ Supported hardware offloads
> | | | rdma-core 24 | | N/A |
> | | | ConnectX-5 | | N/A |
> +-----------------------+-----------------+-----------------+
> + | | VLAN | | DPDK 19.11 | | DPDK 19.11 |
> + | | (of_pop_vlan) | | OFED 4.6-4 | | OFED 4.6-4 |
> + | | | ConnectX-5 | | ConnectX-5 |
> + +-----------------------+-----------------+-----------------+
>
> Notes for testpmd
> -----------------
> diff --git a/doc/guides/rel_notes/release_19_11.rst
> b/doc/guides/rel_notes/release_19_11.rst
> index 27cfbd9..5c2ac15 100644
> --- a/doc/guides/rel_notes/release_19_11.rst
> +++ b/doc/guides/rel_notes/release_19_11.rst
> @@ -223,3 +223,9 @@ Tested Platforms
> Also, make sure to start the actual text at the margin.
> =========================================================
>
> +* **Updated Mellanox mlx5 driver.**
> +
> + Updated Mellanox mlx5 driver with new features and improvements,
> including:
> +
> + * Added support for VLAN pop flow offload command.
> +
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> dc7b10b..8e10932 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -549,6 +549,7 @@ struct mlx5_dev_spawn_data {
> sh->esw_drop_action = mlx5_glue-
> >dr_create_flow_action_drop();
> }
> #endif
> + sh->pop_vlan_action = mlx5_glue-
> >dr_create_flow_action_pop_vlan();
> sh->dv_refcnt++;
> priv->dr_shared = 1;
> return 0;
> @@ -571,6 +572,10 @@ struct mlx5_dev_spawn_data {
> mlx5_glue->destroy_flow_action(sh->esw_drop_action);
> sh->esw_drop_action = NULL;
> }
> + if (sh->pop_vlan_action) {
> + mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
> + sh->pop_vlan_action = NULL;
> + }
> return err;
> #else
> (void)priv;
> @@ -616,6 +621,10 @@ struct mlx5_dev_spawn_data {
> sh->esw_drop_action = NULL;
> }
> #endif
> + if (sh->pop_vlan_action) {
> + mlx5_glue->destroy_flow_action(sh->pop_vlan_action);
> + sh->pop_vlan_action = NULL;
> + }
> pthread_mutex_destroy(&sh->dv_mutex);
> #else
> (void)priv;
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index
> 09ca4b1..a18f588 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -570,6 +570,8 @@ struct mlx5_ibv_shared {
> struct mlx5_flow_tbl_resource tx_tbl[MLX5_MAX_TABLES];
> /* TX Direct Rules tables. */
> void *esw_drop_action; /* Pointer to DR E-Switch drop action. */
> + void *pop_vlan_action; /* Pointer to DR pop VLAN action. */
> + /* TX Direct Rules tables/ */
> LIST_HEAD(matchers, mlx5_flow_dv_matcher) matchers;
> LIST_HEAD(encap_decap, mlx5_flow_dv_encap_decap_resource)
> encaps_decaps;
> LIST_HEAD(modify_cmd, mlx5_flow_dv_modify_hdr_resource)
> modify_cmds; diff --git a/drivers/net/mlx5/mlx5_flow.h
> b/drivers/net/mlx5/mlx5_flow.h index 8d193b6..06b0470 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -154,7 +154,8 @@
>
> #define MLX5_FLOW_DECAP_ACTIONS
> (MLX5_FLOW_ACTION_VXLAN_DECAP | \
> MLX5_FLOW_ACTION_NVGRE_DECAP | \
> - MLX5_FLOW_ACTION_RAW_DECAP)
> + MLX5_FLOW_ACTION_RAW_DECAP | \
> + MLX5_FLOW_ACTION_OF_POP_VLAN)
>
> #define MLX5_FLOW_MODIFY_HDR_ACTIONS
> (MLX5_FLOW_ACTION_SET_IPV4_SRC | \
> MLX5_FLOW_ACTION_SET_IPV4_DST | \
> @@ -171,6 +172,8 @@
> MLX5_FLOW_ACTION_INC_TCP_ACK | \
> MLX5_FLOW_ACTION_DEC_TCP_ACK)
>
> +#define MLX5_FLOW_VLAN_ACTIONS
> (MLX5_FLOW_ACTION_OF_POP_VLAN)
> +
> #ifndef IPPROTO_MPLS
> #define IPPROTO_MPLS 137
> #endif
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c index 7b2ba07..fd2e810 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -815,6 +815,61 @@ struct field_modify_info modify_tcp[] = { }
>
> /**
> + * Validate the pop VLAN action.
> + *
> + * @param[in] action_flags
> + * Holds the actions detected until now.
> + * @param[in] action
> + * Pointer to the pop vlan action.
> + * @param[in] item_flags
> + * The items found in this flow rule.
> + * @param[in] attr
> + * Pointer to flow attributes.
> + * @param[out] error
> + * Pointer to error structure.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +static int
> +flow_dv_validate_action_pop_vlan(struct rte_eth_dev *dev,
> + uint64_t action_flags,
> + const struct rte_flow_action *action,
> + uint64_t item_flags,
> + const struct rte_flow_attr *attr,
> + struct rte_flow_error *error)
> +{
> + struct mlx5_priv *priv = dev->data->dev_private;
> +
> + (void)action;
> + (void)attr;
> + if (!priv->sh->pop_vlan_action)
> + return rte_flow_error_set(error, ENOTSUP,
> +
> RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> + NULL,
> + "pop vlan action is not supported");
> + /*
> + * Check for inconsistencies:
> + * fail strip_vlan in a flow that matches packets without VLAN tags.
> + * fail strip_vlan in a flow that matches packets without explicitly a
> + * matching on VLAN tag ?
> + */
> + if (action_flags & MLX5_FLOW_ACTION_OF_POP_VLAN)
> + return rte_flow_error_set(error, ENOTSUP,
> +
> RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> + NULL,
> + "no support for multiple vlan pop "
> + "actions");
> + if (!(item_flags & MLX5_FLOW_LAYER_OUTER_VLAN))
> + return rte_flow_error_set(error, ENOTSUP,
> +
> RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
> + NULL,
> + "cannot pop vlan without a "
> + "match on (outer) vlan in the flow");
> + return 0;
> +}
> +
> +/**
> * Validate count action.
> *
> * @param[in] dev
> @@ -3109,6 +3164,16 @@ struct field_modify_info modify_tcp[] = {
> action_flags |= MLX5_FLOW_ACTION_COUNT;
> ++actions_n;
> break;
> + case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
> + if (flow_dv_validate_action_pop_vlan(dev,
> + action_flags,
> + actions,
> + item_flags, attr,
> + error))
> + return -rte_errno;
> + action_flags |=
> MLX5_FLOW_ACTION_OF_POP_VLAN;
> + ++actions_n;
> + break;
> case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
> case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
> ret =
> flow_dv_validate_action_l2_encap(action_flags,
> @@ -3283,6 +3348,13 @@ struct field_modify_info modify_tcp[] = {
> "action not supported");
> }
> }
> + if ((action_flags & MLX5_FLOW_LAYER_TUNNEL) &&
> + (action_flags & MLX5_FLOW_VLAN_ACTIONS))
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + actions,
> + "can't have vxlan and vlan"
> + " actions in the same rule");
> /* Eswitch has few restrictions on using items and actions */
> if (attr->transfer) {
> if (action_flags & MLX5_FLOW_ACTION_FLAG) @@ -4801,6
> +4873,12 @@ struct field_modify_info modify_tcp[] = {
> action,
> "cannot create counter"
> " object.");
> + break;
> + case RTE_FLOW_ACTION_TYPE_OF_POP_VLAN:
> + dev_flow->dv.actions[actions_n++] =
> + priv->sh->pop_vlan_action;
> + action_flags |=
> MLX5_FLOW_ACTION_OF_POP_VLAN;
> + break;
> case RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP:
> case RTE_FLOW_ACTION_TYPE_NVGRE_ENCAP:
> if (flow_dv_create_action_l2_encap(dev, actions,
> --
> 1.8.3.1
More information about the dev
mailing list