[dpdk-dev] [PATCH v1 1/1] app/testpmd: add function to display port supported ptypes

[Iremonger, Bernard]

Hi Vamsi,

> -----Original Message-----
> From: vattunuru at marvell.com [mailto:vattunuru at marvell.com]
> Sent: Sunday, September 1, 2019 5:08 AM
> To: dev at dpdk.org
> Cc: Lu, Wenzhuo <wenzhuo.lu at intel.com>; Wu, Jingjing
> <jingjing.wu at intel.com>; Iremonger, Bernard <bernard.iremonger at intel.com>;
> thomas at monjalon.net; Vamsi Attunuru <vattunuru at marvell.com>
> Subject: [dpdk-dev] [PATCH v1 1/1] app/testpmd: add function to display port
> supported ptypes
> 
> From: Vamsi Attunuru <vattunuru at marvell.com>
> 
> Patch adds a runtime function to display ptypes supported by the given port in
> different layers.
> 
> Signed-off-by: Vamsi Attunuru <vattunuru at marvell.com>
> ---
>  app/test-pmd/cmdline.c                      | 111 ++++++++++++++++++++++++++++
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |   7 ++
>  2 files changed, 118 insertions(+)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> 56783aa..839c1b0 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -238,6 +238,10 @@ static void cmd_help_long_parsed(void *parsed_result,
>  			"    Show Tx metadata value set"
>  			" for a specific port\n\n"
> 
> +			"show port (port_id) ptypes\n"
> +			"    Show port supported ptypes"
> +			" for a specific port\n\n"
> +
>  			"show device info (<identifier>|all)"
>  			"       Show general information about devices
> probed.\n\n"
>  		);
> @@ -18820,6 +18824,112 @@ cmdline_parse_inst_t cmd_show_tx_metadata =
> {
>  	},
>  };
> 
> +/* show port supported ptypes */
> +
> +/* Common result structure for show port ptypes */ struct
> +cmd_show_port_supported_ptypes_result {
> +	cmdline_fixed_string_t show;
> +	cmdline_fixed_string_t port;
> +	portid_t port_id;
> +	cmdline_fixed_string_t ptypes;
> +};
> +
> +/* Common CLI fields for show port ptypes */
> +cmdline_parse_token_string_t cmd_show_port_supported_ptypes_show =
> +	TOKEN_STRING_INITIALIZER
> +		(struct cmd_show_port_supported_ptypes_result,
> +		 show, "show");
> +cmdline_parse_token_string_t cmd_show_port_supported_ptypes_port =
> +	TOKEN_STRING_INITIALIZER
> +		(struct cmd_show_port_supported_ptypes_result,
> +		 port, "port");
> +cmdline_parse_token_num_t cmd_show_port_supported_ptypes_port_id =
> +	TOKEN_NUM_INITIALIZER
> +		(struct cmd_show_port_supported_ptypes_result,
> +		 port_id, UINT16);
> +cmdline_parse_token_string_t cmd_show_port_supported_ptypes_ptypes =
> +	TOKEN_STRING_INITIALIZER
> +		(struct cmd_show_port_supported_ptypes_result,
> +		 ptypes, "ptypes");
> +
> +static void
> +cmd_show_port_supported_ptypes_parsed(
> +	void *parsed_result,
> +	__attribute__((unused)) struct cmdline *cl,
> +	__attribute__((unused)) void *data)
> +{
> +	struct cmd_show_port_supported_ptypes_result *res = parsed_result;
> +	uint32_t ptype_mask = RTE_PTYPE_L2_MASK;
> +	uint32_t resv_mask = 0xf0000000;

It would be better to replace 0xf0000000 with a  macro.

> +	uint16_t port_id = res->port_id;
> +	int max_layer_ptypes = 16;
> +	uint32_t ptypes[max_layer_ptypes];
> +	char buf[256], ltype[32];

It would be better to replace the numbers 16, 256 and 32 with macros.

> +	int ret, i;
> +
> +	ret = rte_eth_dev_get_supported_ptypes(port_id, ptype_mask, NULL,
> 0);
> +	if (ret < 0)
> +		return;
> +
> +	while (ptype_mask != resv_mask) {
> +
> +		switch (ptype_mask) {
> +		case RTE_PTYPE_L2_MASK:
> +			strlcpy(ltype, "L2", sizeof(ltype));
> +			break;
> +		case RTE_PTYPE_L3_MASK:
> +			strlcpy(ltype, "L3", sizeof(ltype));
> +			break;
> +		case RTE_PTYPE_L4_MASK:
> +			strlcpy(ltype, "L4", sizeof(ltype));
> +			break;
> +		case RTE_PTYPE_TUNNEL_MASK:
> +			strlcpy(ltype, "Tunnel", sizeof(ltype));
> +			break;
> +		case RTE_PTYPE_INNER_L2_MASK:
> +			strlcpy(ltype, "Inner L2", sizeof(ltype));
> +			break;
> +		case RTE_PTYPE_INNER_L3_MASK:
> +			strlcpy(ltype, "Inner L3", sizeof(ltype));
> +			break;
> +		case RTE_PTYPE_INNER_L4_MASK:
> +			strlcpy(ltype, "Inner L4", sizeof(ltype));
> +			break;
> +		default:
> +			return;
> +		}
> +
> +		ret = rte_eth_dev_get_supported_ptypes(res->port_id,
> +						       ptype_mask, ptypes,
> +						       max_layer_ptypes);
> +
> +		if (ret > 0)
> +			printf("Supported %s ptypes:\n", ltype);
> +		else
> +			printf("%s ptypes unsupported\n", ltype);
> +
> +		for (i = 0; i < ret; ++i) {
> +			rte_get_ptype_name(ptypes[i], buf, sizeof(buf));
> +			printf("%s\n", buf);
> +		}
> +
> +		ptype_mask <<= 4;
> +	}
> +}
> +
> +cmdline_parse_inst_t cmd_show_port_supported_ptypes = {
> +	.f = cmd_show_port_supported_ptypes_parsed,
> +	.data = NULL,
> +	.help_str = "show port <port_id> ptypes",
> +	.tokens = {
> +		(void *)&cmd_show_port_supported_ptypes_show,
> +		(void *)&cmd_show_port_supported_ptypes_port,
> +		(void *)&cmd_show_port_supported_ptypes_port_id,
> +		(void *)&cmd_show_port_supported_ptypes_ptypes,
> +		NULL,
> +	},
> +};
> +
>  /*
> *****************************************************************
> *************** */
> 
>  /* list of instructions */
> @@ -19058,6 +19168,7 @@ cmdline_parse_ctx_t main_ctx[] = {
>  	(cmdline_parse_inst_t *)&cmd_clear_input_set,
>  	(cmdline_parse_inst_t *)&cmd_show_vf_stats,
>  	(cmdline_parse_inst_t *)&cmd_clear_vf_stats,
> +	(cmdline_parse_inst_t *)&cmd_show_port_supported_ptypes,
>  	(cmdline_parse_inst_t *)&cmd_ptype_mapping_get,
>  	(cmdline_parse_inst_t *)&cmd_ptype_mapping_replace,
>  	(cmdline_parse_inst_t *)&cmd_ptype_mapping_reset, diff --git
> a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 313e070..1acd958 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -467,6 +467,13 @@ Show Tx metadata value set for a specific port::
> 
>     testpmd> show port (port_id) tx_metadata
> 
> +show port supported ptypes
> +~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +Show ptypes supported for a specific port::
> +
> +   testpmd> show port (port_id) ptypes
> +
>  show device info
>  ~~~~~~~~~~~~~~~~
> 
> --
> 2.8.4

The 19.11 release notes should also be updated to announce the new command.

Regards,

Bernard.