[dpdk-dev] [PATCH v2 0/3] examples/ipsec-secgw: add fallback session

[Ananyev, Konstantin]

Hi Anoob,

> > > Sorry for the late response. But how do you plan to handle "inline protocol"
> > processed packets?
> >
> > Right now that feature is supported for "inline crypto" only.
> 
> [Anoob] The description says "inline processed" packets. Hence the confusion.
> 
> > For the case when SA doesn't enable replay window and/or ESN current
> > patch should also work for "inline proto" too, but this is just my
> > understanding (not tested, etc.).
> 
> [Anoob] In case of inline ipsec processing, the ipsec state (which would track sequence number etc) will be internal to the PMDs. So anti-
> replay/ESN would have to be done either in the h/w or PMD. This would mean application will not have state information regarding ipsec
> processing. Hence fallback handling with the above scheme will not work in that case.

Agree, that's why I wrote above that current wok might work for inline-proto
*only* if replay window and ESN is disabled. 

> 
> To address this properly for inline protocol, we will have to come up with some logic to share session private data b/w "eligible" PMDs. This
> would involve library changes to rte_security, etc.

Again, totally agree.
As I remember we already discussed it about a year ago, but didn't come up with any concrete proposal.

> Once that is proposed, there will be one kind of handling for inline protocol processing
> and another kind for inline crypto processing. Would you be fine with that?

For sure something needs to be changed for inline-proto to sync replay-window/ESN related data
between HW/PMD and SW. 
What it should be - new function, or something else - hard to tell right now. 
Konstantin

> 
> > Konstantin
> >
> > >
> > > Thanks,
> > > Anoob
> > >
> > > > -----Original Message-----
> > > > From: dev <dev-bounces at dpdk.org> On Behalf Of Marcin Smoczynski
> > > > Sent: Wednesday, September 4, 2019 7:47 PM
> > > > To: konstantin.ananyev at intel.com; akhil.goyal at nxp.com
> > > > Cc: dev at dpdk.org; Marcin Smoczynski <marcinx.smoczynski at intel.com>
> > > > Subject: [dpdk-dev] [PATCH v2 0/3] examples/ipsec-secgw: add
> > > > fallback session
> > > >
> > > > Inline processing is limited to a specified subset of traffic. It is
> > > > often unable to handle more complicated situations, such as
> > > > fragmented traffic. When using inline processing such traffic is dropped.
> > > >
> > > > Introduce multiple sessions per SA allowing to configure a fallback
> > > > lookaside session for packets that normally would be dropped.
> > > > A fallback session type in the SA configuration by adding 'fallback'
> > > > with 'lookaside-none' or 'lookaside-protocol' parameter to determine
> > > > type of session.
> > > >
> > > > Fallback session feature is available only when using librte_ipsec.
> > > >
> > > > v1 to v2 changes:
> > > >  - disable fallback offload for outbound SAs
> > > >  - add test scripts
> > > >
> > > > Marcin Smoczynski (3):
> > > >   examples/ipsec-secgw: ipsec_sa structure cleanup
> > > >   examples/ipsec-secgw: add fallback session feature
> > > >   examples/ipsec-secgw: add offload fallback tests
> > > >
> > > >  doc/guides/sample_app_ug/ipsec_secgw.rst      |  17 +-
> > > >  examples/ipsec-secgw/esp.c                    |  35 ++--
> > > >  examples/ipsec-secgw/ipsec-secgw.c            |  16 +-
> > > >  examples/ipsec-secgw/ipsec.c                  |  99 ++++++-----
> > > >  examples/ipsec-secgw/ipsec.h                  |  61 +++++--
> > > >  examples/ipsec-secgw/ipsec_process.c          | 113 +++++++-----
> > > >  examples/ipsec-secgw/sa.c                     | 164 +++++++++++++-----
> > > >  .../test/trs_aesgcm_common_defs.sh            |   4 +-
> > > >  .../trs_aesgcm_inline_crypto_fallback_defs.sh |   5 +
> > > >  .../test/tun_aesgcm_common_defs.sh            |   6 +-
> > > >  .../tun_aesgcm_inline_crypto_fallback_defs.sh |   5 +
> > > >  11 files changed, 358 insertions(+), 167 deletions(-)  create mode
> > > > 100644
> > > > examples/ipsec-secgw/test/trs_aesgcm_inline_crypto_fallback_defs.sh
> > > >  create mode 100644 examples/ipsec-
> > > > secgw/test/tun_aesgcm_inline_crypto_fallback_defs.sh
> > > >
> > > > --
> > > > 2.21.0.windows.1