[dpdk-dev] [PATCH v2 0/7] ethdev: change allmulticast controls to return status
Andrew Rybchenko
arybchenko at solarflare.com
Tue Sep 24 14:56:06 CEST 2019
m>
References: <1568031190-16510-1-git-send-email-arybchenko at solarflare.co
m>
It is the fourth patch series to get rid of void returning functions
in ethdev in accordance with deprecation notice [1].
It should be applied on top of [2], [3] and [4] which are already
accepted in dpdk-next-net.
Functions which return void are bad since they do not provide explicit
information to the caller if everything is OK or not.
It is especially painful in the case of all-multicast mode since it is
not always supported, there are real cases when it fails to apply and
it affects traffic which is received by the port.
Driver maintainrs are encouraged to review the patch which changes
driver callbacks prototype. Changes are not always trivial when I tried
to provide real status of the operation. I used -EAGAIN when I failed
to choose better error code.
The following two drivers ignore status of internal functions and
definitely could be improved:
net/bnx2x: bnx2x_set_rx_mode() can report failure, but it is used in
other places and should be updated carefully.
net/igbvf: e1000_promisc_set_vf() provides return status, but it is
unclear how handle it properly.
[1] https://patches.dpdk.org/patch/56969/
[2] https://patches.dpdk.org/project/dpdk/list/?series=6391
[3] https://patches.dpdk.org/project/dpdk/list/?series=6407
[4] https://patches.dpdk.org/project/dpdk/list/?series=6308
v2:
- add documentation for enable/disable callbacks
- apply eth_err() to callback return status in
rte_eth_dev_config_restore()
- do not check callback vs NULL if settings match
- reword logs in net/failsafe in accordance with review notes
- use -E_RTE_SECONDARY in net/enic as requested in review notes
- add acks
- rebase
Andrew Rybchenko (1):
ethdev: do nothing if all-multicast mode is applied again
Ivan Ilchenko (6):
ethdev: change allmulticast mode API to return errors
net/failsafe: check code of allmulticast mode switch
net/bonding: check code of allmulticast mode switch
ethdev: change allmulticast callbacks to return status
app/testpmd: check code of allmulticast mode switch
examples/ipv4_multicast: check allmulticast enable status
app/test-pmd/cmdline.c | 10 +---
app/test-pmd/testpmd.h | 1 +
app/test-pmd/util.c | 16 ++++++
doc/guides/rel_notes/deprecation.rst | 1 -
doc/guides/rel_notes/release_19_11.rst | 4 ++
drivers/net/atlantic/atl_ethdev.c | 14 +++--
drivers/net/axgbe/axgbe_ethdev.c | 16 ++++--
drivers/net/bnx2x/bnx2x_ethdev.c | 8 ++-
drivers/net/bnxt/bnxt_ethdev.c | 26 +++++++--
drivers/net/bonding/rte_eth_bond_8023ad.c | 13 ++++-
drivers/net/bonding/rte_eth_bond_pmd.c | 67 ++++++++++++++++++++---
drivers/net/cxgbe/cxgbe_ethdev.c | 12 ++--
drivers/net/cxgbe/cxgbe_pfvf.h | 4 +-
drivers/net/dpaa/dpaa_ethdev.c | 8 ++-
drivers/net/dpaa2/dpaa2_ethdev.c | 14 +++--
drivers/net/e1000/em_ethdev.c | 14 +++--
drivers/net/e1000/igb_ethdev.c | 26 ++++++---
drivers/net/enetc/enetc_ethdev.c | 10 +++-
drivers/net/enic/enic_ethdev.c | 22 ++++++--
drivers/net/failsafe/failsafe_ether.c | 8 ++-
drivers/net/failsafe/failsafe_ops.c | 52 ++++++++++++++++--
drivers/net/fm10k/fm10k_ethdev.c | 28 ++++++----
drivers/net/i40e/i40e_ethdev.c | 22 +++++---
drivers/net/i40e/i40e_ethdev_vf.c | 20 +++++--
drivers/net/i40e/i40e_vf_representor.c | 8 +--
drivers/net/iavf/iavf_ethdev.c | 20 +++++--
drivers/net/ice/ice_ethdev.c | 30 +++++++---
drivers/net/ipn3ke/ipn3ke_ethdev.h | 4 +-
drivers/net/ipn3ke/ipn3ke_representor.c | 8 ++-
drivers/net/ixgbe/ixgbe_ethdev.c | 53 ++++++++++++++----
drivers/net/liquidio/lio_ethdev.c | 12 ++--
drivers/net/mlx4/mlx4.h | 4 +-
drivers/net/mlx4/mlx4_ethdev.c | 14 +++--
drivers/net/mlx5/mlx5.h | 4 +-
drivers/net/mlx5/mlx5_rxmode.c | 38 ++++++++++---
drivers/net/mvpp2/mrvl_ethdev.c | 28 +++++++---
drivers/net/netvsc/hn_ethdev.c | 8 +--
drivers/net/netvsc/hn_var.h | 4 +-
drivers/net/netvsc/hn_vf.c | 8 +--
drivers/net/nfb/nfb_rxmode.c | 10 +++-
drivers/net/nfb/nfb_rxmode.h | 8 ++-
drivers/net/octeontx2/otx2_ethdev.h | 4 +-
drivers/net/octeontx2/otx2_ethdev_ops.c | 8 ++-
drivers/net/qede/qede_ethdev.c | 17 ++++--
drivers/net/sfc/sfc_ethdev.c | 8 +--
drivers/net/szedata2/rte_eth_szedata2.c | 6 +-
drivers/net/tap/rte_eth_tap.c | 52 ++++++++++++++----
drivers/net/virtio/virtio_ethdev.c | 24 +++++---
drivers/net/vmxnet3/vmxnet3_ethdev.c | 12 ++--
examples/ipv4_multicast/main.c | 6 +-
lib/librte_ethdev/rte_ethdev.c | 61 ++++++++++++++++-----
lib/librte_ethdev/rte_ethdev.h | 14 ++++-
lib/librte_ethdev/rte_ethdev_core.h | 52 ++++++++++++++++--
53 files changed, 701 insertions(+), 240 deletions(-)
--
2.17.1
More information about the dev
mailing list