[dpdk-dev] [PATCH v2 1/2] ethdev: extend RSS offload types

[Ye Xiaolong]

On 09/23, Simei Su wrote:
>This patch cover two aspects:
>  (1)decouple RTE_ETH_FLOW_* and ETH_RSS_*. Because both serve
>     different purposes.
>
>  (2)reserve several bits as input set selection from bottom
>     of the 64 bits. It is combined with exisiting ETH_RSS_* to
>     represent rss types.
>
>  for example:
>    ETH_RSS_IPV4 | ETH_RSS_L3_SRC_ONLY: hash on src ip address only
>    ETH_RSS_IPV4_UDP | ETH_RSS_L4_DST_ONLY: hash on src/dst IP and
>                                            dst UDP port
>    ETH_RSS_L2_PAYLOAD | ETH_RSS_L2_DST_ONLY: hash on dst mac address

We also need to document well about what happens if users just set ETH_RSS_IPV4,
both both src/dst ip still are taken into account, right? 

Thanks,
Xiaolong


>
>Signed-off-by: Simei Su <simei.su at intel.com>
>---
> lib/librte_ethdev/rte_ethdev.h | 60 ++++++++++++++++++++++++------------------
> 1 file changed, 35 insertions(+), 25 deletions(-)
>
>diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
>index d987178..7e6530d 100644
>--- a/lib/librte_ethdev/rte_ethdev.h
>+++ b/lib/librte_ethdev/rte_ethdev.h
>@@ -482,31 +482,41 @@ struct rte_eth_rss_conf {
> #define RTE_ETH_FLOW_MAX                23
> 
> /*
>- * The RSS offload types are defined based on flow types.
>- * Different NIC hardware may support different RSS offload
>- * types. The supported flow types or RSS offload types can be queried by
>- * rte_eth_dev_info_get().
>- */
>-#define ETH_RSS_IPV4               (1ULL << RTE_ETH_FLOW_IPV4)
>-#define ETH_RSS_FRAG_IPV4          (1ULL << RTE_ETH_FLOW_FRAG_IPV4)
>-#define ETH_RSS_NONFRAG_IPV4_TCP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP)
>-#define ETH_RSS_NONFRAG_IPV4_UDP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP)
>-#define ETH_RSS_NONFRAG_IPV4_SCTP  (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP)
>-#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER)
>-#define ETH_RSS_IPV6               (1ULL << RTE_ETH_FLOW_IPV6)
>-#define ETH_RSS_FRAG_IPV6          (1ULL << RTE_ETH_FLOW_FRAG_IPV6)
>-#define ETH_RSS_NONFRAG_IPV6_TCP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP)
>-#define ETH_RSS_NONFRAG_IPV6_UDP   (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP)
>-#define ETH_RSS_NONFRAG_IPV6_SCTP  (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP)
>-#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER)
>-#define ETH_RSS_L2_PAYLOAD         (1ULL << RTE_ETH_FLOW_L2_PAYLOAD)
>-#define ETH_RSS_IPV6_EX            (1ULL << RTE_ETH_FLOW_IPV6_EX)
>-#define ETH_RSS_IPV6_TCP_EX        (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX)
>-#define ETH_RSS_IPV6_UDP_EX        (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX)
>-#define ETH_RSS_PORT               (1ULL << RTE_ETH_FLOW_PORT)
>-#define ETH_RSS_VXLAN              (1ULL << RTE_ETH_FLOW_VXLAN)
>-#define ETH_RSS_GENEVE             (1ULL << RTE_ETH_FLOW_GENEVE)
>-#define ETH_RSS_NVGRE              (1ULL << RTE_ETH_FLOW_NVGRE)
>+ * Below macros are defined for RSS offload types, they can be used to
>+ * fill rte_eth_rss_conf.rss_hf or rte_flow_action_rss.types.
>+ */
>+#define ETH_RSS_IPV4               (1ULL << 2)
>+#define ETH_RSS_FRAG_IPV4          (1ULL << 3)
>+#define ETH_RSS_NONFRAG_IPV4_TCP   (1ULL << 4)
>+#define ETH_RSS_NONFRAG_IPV4_UDP   (1ULL << 5)
>+#define ETH_RSS_NONFRAG_IPV4_SCTP  (1ULL << 6)
>+#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << 7)
>+#define ETH_RSS_IPV6               (1ULL << 8)
>+#define ETH_RSS_FRAG_IPV6          (1ULL << 9)
>+#define ETH_RSS_NONFRAG_IPV6_TCP   (1ULL << 10)
>+#define ETH_RSS_NONFRAG_IPV6_UDP   (1ULL << 11)
>+#define ETH_RSS_NONFRAG_IPV6_SCTP  (1ULL << 12)
>+#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << 13)
>+#define ETH_RSS_L2_PAYLOAD         (1ULL << 14)
>+#define ETH_RSS_IPV6_EX            (1ULL << 15)
>+#define ETH_RSS_IPV6_TCP_EX        (1ULL << 16)
>+#define ETH_RSS_IPV6_UDP_EX        (1ULL << 17)
>+#define ETH_RSS_PORT               (1ULL << 18)
>+#define ETH_RSS_VXLAN              (1ULL << 19)
>+#define ETH_RSS_GENEVE             (1ULL << 20)
>+#define ETH_RSS_NVGRE              (1ULL << 21)
>+
>+/*
>+ * We use the following macros to combine with above ETH_RSS_* for
>+ * more specific input set selection. These bits are defined starting
>+ * from the bottom of the 64 bits.
>+ */
>+#define	ETH_RSS_L2_SRC_ONLY	   (1ULL << 63)
>+#define	ETH_RSS_L2_DST_ONLY	   (1ULL << 62)
>+#define	ETH_RSS_L3_SRC_ONLY	   (1ULL << 61)
>+#define	ETH_RSS_L3_DST_ONLY	   (1ULL << 60)
>+#define	ETH_RSS_L4_SRC_ONLY	   (1ULL << 59)
>+#define	ETH_RSS_L4_DST_ONLY	   (1ULL << 58)
> 
> #define ETH_RSS_IP ( \
> 	ETH_RSS_IPV4 | \
>-- 
>1.8.3.1
>