[dpdk-dev] [PATCH 06/13] app/testpmd: add hairpin support

[Slava Ovsiienko]

> -----Original Message-----
> From: dev <dev-bounces at dpdk.org> On Behalf Of Ori Kam
> Sent: Thursday, September 26, 2019 9:29
> To: Wenzhuo Lu <wenzhuo.lu at intel.com>; Jingjing Wu
> <jingjing.wu at intel.com>; Bernard Iremonger
> <bernard.iremonger at intel.com>
> Cc: dev at dpdk.org; Ori Kam <orika at mellanox.com>;
> stephen at networkplumber.org
> Subject: [dpdk-dev] [PATCH 06/13] app/testpmd: add hairpin support
> 
> This commit introduce the hairpin queues to the testpmd.
> the hairpin queue is configured using --hairpinq=<n> the hairpin queue adds n
> queue objects for both the total number of TX queues and RX queues.
> The connection between the queues are 1 to 1, first Rx hairpin queue will be
> connected to the first Tx hairpin queue
> 
> Signed-off-by: Ori Kam <orika at mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo at mellanox.com>

> ---
>  app/test-pmd/parameters.c | 12 ++++++++++
>  app/test-pmd/testpmd.c    | 59
> +++++++++++++++++++++++++++++++++++++++++++++--
>  app/test-pmd/testpmd.h    |  1 +
>  3 files changed, 70 insertions(+), 2 deletions(-)
> 
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index
> 6c78dca..16bdcc8 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -147,6 +147,8 @@
>  	printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
>  	printf("  --txq=N: set the number of TX queues per port to N.\n");
>  	printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
> +	printf("  --hairpinq=N: set the number of hairpin queues per port to "
> +	       "N.\n");
>  	printf("  --burst=N: set the number of packets per burst to N.\n");
>  	printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
>  	printf("  --rxpt=N: set prefetch threshold register of RX rings to
> N.\n"); @@ -618,6 +620,7 @@
>  		{ "txq",			1, 0, 0 },
>  		{ "rxd",			1, 0, 0 },
>  		{ "txd",			1, 0, 0 },
> +		{ "hairpinq",			1, 0, 0 },
>  		{ "burst",			1, 0, 0 },
>  		{ "mbcache",			1, 0, 0 },
>  		{ "txpt",			1, 0, 0 },
> @@ -1036,6 +1039,15 @@
>  						  " >= 0 && <= %u\n", n,
> 
> get_allowed_max_nb_txq(&pid));
>  			}
> +			if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
> +				n = atoi(optarg);
> +				if (n >= 0 && check_nb_txq((queueid_t)n) ==
> 0)
> +					nb_hairpinq = (queueid_t) n;
> +				else
> +					rte_exit(EXIT_FAILURE, "txq %d
> invalid - must be"
> +						  " >= 0 && <= %u\n", n,
> +
> get_allowed_max_nb_txq(&pid));
> +			}
>  			if (!nb_rxq && !nb_txq) {
>  				rte_exit(EXIT_FAILURE, "Either rx or tx
> queues should "
>  						"be non-zero\n");
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> de91e1b..f15a308 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -235,6 +235,7 @@ struct fwd_engine * fwd_engines[] = {
>  /*
>   * Configurable number of RX/TX queues.
>   */
> +queueid_t nb_hairpinq; /**< Number of hairpin queues per port. */
>  queueid_t nb_rxq = 1; /**< Number of RX queues per port. */  queueid_t
> nb_txq = 1; /**< Number of TX queues per port. */
> 
> @@ -2064,6 +2065,10 @@ struct extmem_param {
>  	queueid_t qi;
>  	struct rte_port *port;
>  	struct rte_ether_addr mac_addr;
> +	struct rte_eth_hairpin_conf hairpin_conf = {
> +		.peer_n = 1,
> +	};
> +	int i;
> 
>  	if (port_id_is_invalid(pid, ENABLED_WARN))
>  		return 0;
> @@ -2097,8 +2102,9 @@ struct extmem_param {
>  			printf("Configuring Port %d (socket %u)\n", pi,
>  					port->socket_id);
>  			/* configure port */
> -			diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
> -						&(port->dev_conf));
> +			diag = rte_eth_dev_configure(pi, nb_rxq +
> nb_hairpinq,
> +						     nb_txq + nb_hairpinq,
> +						     &(port->dev_conf));
>  			if (diag != 0) {
>  				if (rte_atomic16_cmpset(&(port-
> >port_status),
>  				RTE_PORT_HANDLING,
> RTE_PORT_STOPPED) == 0) @@ -2191,6 +2197,55 @@ struct
> extmem_param {
>  				port->need_reconfig_queues = 1;
>  				return -1;
>  			}
> +			/* setup hairpin queues */
> +			i = 0;
> +			for (qi = nb_txq; qi < nb_hairpinq + nb_txq; qi++) {
> +				hairpin_conf.peers[0].port = pi;
> +				hairpin_conf.peers[0].queue = i + nb_rxq;
> +				diag = rte_eth_tx_hairpin_queue_setup
> +					(pi, qi, nb_txd,
> +					 port->socket_id, &(port-
> >tx_conf[qi]),
> +					 &hairpin_conf);
> +				i++;
> +				if (diag == 0)
> +					continue;
> +
> +				/* Fail to setup rx queue, return */
> +				if (rte_atomic16_cmpset(&(port-
> >port_status),
> +
> 	RTE_PORT_HANDLING,
> +
> 	RTE_PORT_STOPPED) == 0)
> +					printf("Port %d can not be set back "
> +							"to stopped\n", pi);
> +				printf("Fail to configure port %d hairpin "
> +				       "queues\n", pi);
> +				/* try to reconfigure queues next time */
> +				port->need_reconfig_queues = 1;
> +				return -1;
> +			}
> +			i = 0;
> +			for (qi = nb_rxq; qi < nb_hairpinq + nb_rxq; qi++) {
> +				hairpin_conf.peers[0].port = pi;
> +				hairpin_conf.peers[0].queue = i + nb_txq;
> +				diag = rte_eth_rx_hairpin_queue_setup
> +					(pi, qi, nb_rxd,
> +					 port->socket_id, &(port-
> >rx_conf[qi]),
> +					 &hairpin_conf);
> +				i++;
> +				if (diag == 0)
> +					continue;
> +
> +				/* Fail to setup rx queue, return */
> +				if (rte_atomic16_cmpset(&(port-
> >port_status),
> +
> 	RTE_PORT_HANDLING,
> +
> 	RTE_PORT_STOPPED) == 0)
> +					printf("Port %d can not be set back "
> +							"to stopped\n", pi);
> +				printf("Fail to configure port %d hairpin "
> +				       "queues\n", pi);
> +				/* try to reconfigure queues next time */
> +				port->need_reconfig_queues = 1;
> +				return -1;
> +			}
>  		}
>  		configure_rxtx_dump_callbacks(verbose_level);
>  		/* start port */
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index
> d73955d..09baa72 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -383,6 +383,7 @@ struct queue_stats_mappings {
> 
>  extern uint64_t rss_hf;
> 
> +extern queueid_t nb_hairpinq;
>  extern queueid_t nb_rxq;
>  extern queueid_t nb_txq;
> 
> --
> 1.8.3.1