[dpdk-dev] [PATCH v3 12/19] net/hinic: set link down and up

Xiaoyun wang cloud.wangxiaoyun at huawei.com
Mon Sep 30 16:00:50 CEST 2019


This patch supports setting link down and up.

Signed-off-by: Xiaoyun wang <cloud.wangxiaoyun at huawei.com>
---
 doc/guides/nics/hinic.rst                 |  1 +
 drivers/net/hinic/base/hinic_pmd_cmd.h    |  2 +
 drivers/net/hinic/base/hinic_pmd_niccfg.c | 38 +++++++++++++++++++
 drivers/net/hinic/base/hinic_pmd_niccfg.h |  9 +++++
 drivers/net/hinic/hinic_pmd_ethdev.c      | 62 +++++++++++++++++++++++++++++++
 5 files changed, 112 insertions(+)

diff --git a/doc/guides/nics/hinic.rst b/doc/guides/nics/hinic.rst
index 8ff4171..9a9fcbe 100644
--- a/doc/guides/nics/hinic.rst
+++ b/doc/guides/nics/hinic.rst
@@ -31,6 +31,7 @@ Features
 - Unicast MAC filter
 - Multicast MAC filter
 - Flow director
+- Set Link down or up
 
 Prerequisites
 -------------
diff --git a/drivers/net/hinic/base/hinic_pmd_cmd.h b/drivers/net/hinic/base/hinic_pmd_cmd.h
index 6b3dcf3..55d4292 100644
--- a/drivers/net/hinic/base/hinic_pmd_cmd.h
+++ b/drivers/net/hinic/base/hinic_pmd_cmd.h
@@ -119,6 +119,8 @@ enum hinic_port_cmd {
 	HINIC_PORT_CMD_SET_IPSU_MAC		= 0xcb,
 	HINIC_PORT_CMD_GET_IPSU_MAC		= 0xcc,
 
+	HINIC_PORT_CMD_SET_XSFP_STATUS		= 0xD4,
+
 	HINIC_PORT_CMD_GET_LINK_MODE		= 0xD9,
 	HINIC_PORT_CMD_SET_SPEED		= 0xDA,
 	HINIC_PORT_CMD_SET_AUTONEG		= 0xDB,
diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.c b/drivers/net/hinic/base/hinic_pmd_niccfg.c
index 53d981b..9f23fdd 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.c
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.c
@@ -1613,6 +1613,44 @@ int hinic_get_link_mode(void *hwdev, u32 *supported, u32 *advertised)
 }
 
 /**
+ * hinic_set_xsfp_tx_status - Enable or disable the fiber in
+ * tx direction when set link up or down.
+ *
+ * @param hwdev
+ *   The hardware interface of a nic device.
+ * @param enable
+ *   Enable or Disable.
+ *
+ * @return
+ *   0 on success.
+ *   negative error value otherwise.
+ */
+int hinic_set_xsfp_tx_status(void *hwdev, bool enable)
+{
+	struct hinic_set_xsfp_status xsfp_status;
+	u16 out_size = sizeof(struct hinic_set_xsfp_status);
+	int err;
+
+	memset(&xsfp_status, 0, sizeof(xsfp_status));
+	xsfp_status.mgmt_msg_head.resp_aeq_num = HINIC_AEQ1;
+	xsfp_status.port_id = hinic_global_func_id(hwdev);
+	xsfp_status.xsfp_tx_dis = ((enable == 0) ? 1 : 0);
+
+	err = l2nic_msg_to_mgmt_sync(hwdev, HINIC_PORT_CMD_SET_XSFP_STATUS,
+		&xsfp_status, sizeof(struct hinic_set_xsfp_status),
+		&xsfp_status, &out_size);
+	if (err || !out_size || xsfp_status.mgmt_msg_head.status) {
+		PMD_DRV_LOG(ERR,
+			"Failed to %s port xsfp status, err: %d, status: 0x%x, out size: 0x%x\n",
+			enable ? "Disable" : "Enable", err,
+			xsfp_status.mgmt_msg_head.status, out_size);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+/**
  * hinic_flush_qp_res - Flush tx && rx chip resources in case of set vport
  * fake failed when device start.
  *
diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.h b/drivers/net/hinic/base/hinic_pmd_niccfg.h
index e8ce332..beab630 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.h
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.h
@@ -578,6 +578,13 @@ struct hinic_link_mode_cmd {
 	u16	advertised;
 };
 
+struct hinic_set_xsfp_status {
+	struct hinic_mgmt_msg_head mgmt_msg_head;
+
+	u32 port_id;
+	u32 xsfp_tx_dis;	/* 0: tx enable; 1: tx disable */
+};
+
 struct hinic_clear_qp_resource {
 	struct hinic_mgmt_msg_head mgmt_msg_head;
 
@@ -807,6 +814,8 @@ int hinic_set_link_status_follow(void *hwdev,
 
 int hinic_get_link_mode(void *hwdev, u32 *supported, u32 *advertised);
 
+int hinic_set_xsfp_tx_status(void *hwdev, bool enable);
+
 int hinic_flush_qp_res(void *hwdev);
 
 int hinic_init_function_table(void *hwdev, u16 rx_buf_sz);
diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
index d0bcbe5..ea39ff0 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.c
+++ b/drivers/net/hinic/hinic_pmd_ethdev.c
@@ -883,6 +883,66 @@ static int hinic_link_update(struct rte_eth_dev *dev, int wait_to_complete)
 }
 
 /**
+ * DPDK callback to bring the link UP.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+static int hinic_dev_set_link_up(struct rte_eth_dev *dev)
+{
+	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
+	int ret;
+
+	ret = hinic_set_xsfp_tx_status(nic_dev->hwdev, true);
+	if (ret) {
+		PMD_DRV_LOG(ERR, "Enable port tx xsfp failed, dev_name: %s, port_id: %d",
+			    nic_dev->proc_dev_name, dev->data->port_id);
+		return ret;
+	}
+
+	/* link status follow phy port status, up will open pma */
+	ret = hinic_set_port_enable(nic_dev->hwdev, true);
+	if (ret)
+		PMD_DRV_LOG(ERR, "Set mac link up failed, dev_name: %s, port_id: %d",
+			    nic_dev->proc_dev_name, dev->data->port_id);
+
+	return ret;
+}
+
+/**
+ * DPDK callback to bring the link DOWN.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+static int hinic_dev_set_link_down(struct rte_eth_dev *dev)
+{
+	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
+	int ret;
+
+	ret = hinic_set_xsfp_tx_status(nic_dev->hwdev, false);
+	if (ret) {
+		PMD_DRV_LOG(ERR, "Disable port tx xsfp failed, dev_name: %s, port_id: %d",
+			    nic_dev->proc_dev_name, dev->data->port_id);
+		return ret;
+	}
+
+	/* link status follow phy port status, up will close pma */
+	ret = hinic_set_port_enable(nic_dev->hwdev, false);
+	if (ret)
+		PMD_DRV_LOG(ERR, "Set mac link down failed, dev_name: %s, port_id: %d",
+			    nic_dev->proc_dev_name, dev->data->port_id);
+
+	return ret;
+}
+
+/**
  * DPDK callback to start the device.
  *
  * @param dev
@@ -2756,6 +2816,8 @@ static void hinic_dev_close(struct rte_eth_dev *dev)
 	.rx_queue_setup                = hinic_rx_queue_setup,
 	.tx_queue_setup                = hinic_tx_queue_setup,
 	.dev_start                     = hinic_dev_start,
+	.dev_set_link_up               = hinic_dev_set_link_up,
+	.dev_set_link_down             = hinic_dev_set_link_down,
 	.link_update                   = hinic_link_update,
 	.rx_queue_release              = hinic_rx_queue_release,
 	.tx_queue_release              = hinic_tx_queue_release,
-- 
1.8.3.1



More information about the dev mailing list