[dpdk-dev] [PATCH 1/5] app/test-flow-perf: add flow performance skeleton

Wisam Jaddo wisamm at mellanox.com
Thu Apr 9 17:42:53 CEST 2020


Add flow performance application skeleton.

Signed-off-by: Wisam Jaddo <wisamm at mellanox.com>
---
 MAINTAINERS                          |   5 +
 app/Makefile                         |   1 +
 app/meson.build                      |   1 +
 app/test-flow-perf/Makefile          |  26 +++
 app/test-flow-perf/main.c            | 246 +++++++++++++++++++++++++++
 app/test-flow-perf/meson.build       |  11 ++
 app/test-flow-perf/user_parameters.h |  16 ++
 config/common_base                   |   5 +
 doc/guides/tools/flow-perf.rst       |  69 ++++++++
 doc/guides/tools/index.rst           |   1 +
 10 files changed, 381 insertions(+)
 create mode 100644 app/test-flow-perf/Makefile
 create mode 100644 app/test-flow-perf/main.c
 create mode 100644 app/test-flow-perf/meson.build
 create mode 100644 app/test-flow-perf/user_parameters.h
 create mode 100644 doc/guides/tools/flow-perf.rst

diff --git a/MAINTAINERS b/MAINTAINERS
index 4800f6884a..a389ac127f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1495,6 +1495,11 @@ T: git://dpdk.org/next/dpdk-next-net
 F: app/test-pmd/
 F: doc/guides/testpmd_app_ug/
 
+Flow performance tool
+M: Wisam Jaddo <wisamm at mellanox.com>
+F: app/test-flow-perf
+F: doc/guides/flow-perf.rst
+
 Compression performance test application
 T: git://dpdk.org/next/dpdk-next-crypto
 F: app/test-compress-perf/
diff --git a/app/Makefile b/app/Makefile
index db9d2d5380..694df67358 100644
--- a/app/Makefile
+++ b/app/Makefile
@@ -9,6 +9,7 @@ DIRS-$(CONFIG_RTE_PROC_INFO) += proc-info
 DIRS-$(CONFIG_RTE_LIBRTE_PDUMP) += pdump
 DIRS-$(CONFIG_RTE_LIBRTE_ACL) += test-acl
 DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += test-cmdline
+DIRS-$(CONFIG_RTE_TEST_FLOW_PERF) += test-flow-perf
 DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += test-pipeline
 DIRS-$(CONFIG_RTE_LIBRTE_IPSEC) += test-sad
 
diff --git a/app/meson.build b/app/meson.build
index 71109cc422..20d77b0bd6 100644
--- a/app/meson.build
+++ b/app/meson.build
@@ -14,6 +14,7 @@ apps = [
 	'test-compress-perf',
 	'test-crypto-perf',
 	'test-eventdev',
+	'test-flow-perf',
 	'test-pipeline',
 	'test-pmd',
 	'test-sad']
diff --git a/app/test-flow-perf/Makefile b/app/test-flow-perf/Makefile
new file mode 100644
index 0000000000..45b1fb1464
--- /dev/null
+++ b/app/test-flow-perf/Makefile
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright 2020 Mellanox Technologies, Ltd
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifeq ($(CONFIG_RTE_TEST_FLOW_PERF),y)
+
+#
+# library name
+#
+APP = flow_perf
+
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -Wno-deprecated-declarations
+CFLAGS += -Wno-unused-function
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-y += main.c
+
+include $(RTE_SDK)/mk/rte.app.mk
+
+endif
diff --git a/app/test-flow-perf/main.c b/app/test-flow-perf/main.c
new file mode 100644
index 0000000000..156b9ef553
--- /dev/null
+++ b/app/test-flow-perf/main.c
@@ -0,0 +1,246 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ *
+ * This file contain the application main file
+ * This application provides the user the ability to test the
+ * insertion rate for specific rte_flow rule under stress state ~4M rule/
+ *
+ * Then it will also provide packet per second measurement after installing
+ * all rules, the user may send traffic to test the PPS that match the rules
+ * after all rules are installed, to check performance or functionality after
+ * the stress.
+ *
+ * The flows insertion will go for all ports first, then it will print the
+ * results, after that the application will go into forwarding packets mode
+ * it will start receiving traffic if any and then forwarding it back and
+ * gives packet per second measurement.
+ *
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <netinet/in.h>
+#include <setjmp.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <errno.h>
+#include <getopt.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <assert.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/time.h>
+
+
+#include <rte_eal.h>
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_net.h>
+#include <rte_flow.h>
+#include <rte_cycles.h>
+#include <rte_memory.h>
+
+#include "user_parameters.h"
+
+static uint32_t nb_lcores;
+static struct rte_mempool *mbuf_mp;
+
+static void usage(char *progname)
+{
+	printf("\nusage: %s", progname);
+}
+
+static void
+args_parse(int argc, char **argv)
+{
+	char **argvopt;
+	int opt;
+	int opt_idx;
+	static struct option lgopts[] = {
+		/* Control */
+		{ "help",                       0, 0, 0 },
+	};
+
+	argvopt = argv;
+
+	while ((opt = getopt_long(argc, argvopt, "",
+				lgopts, &opt_idx)) != EOF) {
+		switch (opt) {
+		case 0:
+			if (!strcmp(lgopts[opt_idx].name, "help")) {
+				usage(argv[0]);
+				rte_exit(EXIT_SUCCESS, "Displayed help\n");
+			}
+			break;
+		default:
+			usage(argv[0]);
+			printf("Invalid option: %s\n", argv[optind]);
+			rte_exit(EXIT_SUCCESS, "Invalid option\n");
+			break;
+		}
+	}
+}
+
+static void
+init_port(void)
+{
+	int ret;
+	uint16_t i, j;
+	uint16_t port_id;
+	uint16_t nr_ports = rte_eth_dev_count_avail();
+	struct rte_eth_hairpin_conf hairpin_conf = {
+			.peer_count = 1,
+	};
+	struct rte_eth_conf port_conf = {
+		.rxmode = {
+			.split_hdr_size = 0,
+		},
+		.rx_adv_conf = {
+			.rss_conf.rss_hf =
+					ETH_RSS_IP  |
+					ETH_RSS_UDP |
+					ETH_RSS_TCP,
+		}
+	};
+	struct rte_eth_txconf txq_conf;
+	struct rte_eth_rxconf rxq_conf;
+	struct rte_eth_dev_info dev_info;
+
+	if (nr_ports == 0)
+		rte_exit(EXIT_FAILURE, "Error: no port detected\n");
+	mbuf_mp = rte_pktmbuf_pool_create("mbuf_pool",
+					TOTAL_MBUF_NUM, MBUF_CACHE_SIZE,
+					0, MBUF_SIZE,
+					rte_socket_id());
+
+	if (mbuf_mp == NULL)
+		rte_exit(EXIT_FAILURE, "Error: can't init mbuf pool\n");
+
+	for (port_id = 0; port_id < nr_ports; port_id++) {
+		ret = rte_eth_dev_info_get(port_id, &dev_info);
+		if (ret != 0)
+			rte_exit(EXIT_FAILURE,
+					"Error during getting device (port %u) info: %s\n",
+					port_id, strerror(-ret));
+
+		port_conf.txmode.offloads &= dev_info.tx_offload_capa;
+		printf(":: initializing port: %d\n", port_id);
+		ret = rte_eth_dev_configure(port_id, RXQs + HAIRPIN_QUEUES,
+				TXQs + HAIRPIN_QUEUES, &port_conf);
+		if (ret < 0)
+			rte_exit(EXIT_FAILURE,
+					":: cannot configure device: err=%d, port=%u\n",
+					ret, port_id);
+
+		rxq_conf = dev_info.default_rxconf;
+		rxq_conf.offloads = port_conf.rxmode.offloads;
+		for (i = 0; i < RXQs; i++) {
+			ret = rte_eth_rx_queue_setup(port_id, i, NR_RXD,
+						rte_eth_dev_socket_id(port_id),
+						&rxq_conf,
+						mbuf_mp);
+			if (ret < 0)
+				rte_exit(EXIT_FAILURE,
+						":: Rx queue setup failed: err=%d, port=%u\n",
+						ret, port_id);
+		}
+
+		txq_conf = dev_info.default_txconf;
+		txq_conf.offloads = port_conf.txmode.offloads;
+
+		for (i = 0; i < TXQs; i++) {
+			ret = rte_eth_tx_queue_setup(port_id, i, NR_TXD,
+						rte_eth_dev_socket_id(port_id),
+						&txq_conf);
+			if (ret < 0)
+				rte_exit(EXIT_FAILURE,
+						":: Tx queue setup failed: err=%d, port=%u\n",
+						ret, port_id);
+		}
+
+		ret = rte_eth_promiscuous_enable(port_id);
+		if (ret != 0)
+			rte_exit(EXIT_FAILURE,
+					":: promiscuous mode enable failed: err=%s, port=%u\n",
+					rte_strerror(-ret), port_id);
+
+		for (i = RXQs, j = 0; i < RXQs + HAIRPIN_QUEUES; i++, j++) {
+			hairpin_conf.peers[0].port = port_id;
+			hairpin_conf.peers[0].queue = j + TXQs;
+			ret = rte_eth_rx_hairpin_queue_setup(port_id, i,
+							NR_RXD, &hairpin_conf);
+			if (ret != 0)
+				rte_exit(EXIT_FAILURE,
+					":: Hairpin rx queue setup failed: err=%d, port=%u\n",
+					ret, port_id);
+		}
+
+		for (i = TXQs, j = 0; i < TXQs + HAIRPIN_QUEUES; i++, j++) {
+			hairpin_conf.peers[0].port = port_id;
+			hairpin_conf.peers[0].queue = j + RXQs;
+			ret = rte_eth_tx_hairpin_queue_setup(port_id, i,
+							NR_TXD, &hairpin_conf);
+			if (ret != 0)
+				rte_exit(EXIT_FAILURE,
+					":: Hairpin tx queue setup failed: err=%d, port=%u\n",
+					ret, port_id);
+		}
+
+		ret = rte_eth_dev_start(port_id);
+		if (ret < 0)
+			rte_exit(EXIT_FAILURE,
+				"rte_eth_dev_start:err=%d, port=%u\n",
+				ret, port_id);
+
+		printf(":: initializing port: %d done\n", port_id);
+	}
+}
+
+int
+main(int argc, char **argv)
+{
+	uint16_t lcore_id;
+	uint16_t port;
+	uint16_t nr_ports;
+	int ret;
+	struct rte_flow_error error;
+
+	nr_ports = rte_eth_dev_count_avail();
+	ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		rte_exit(EXIT_FAILURE, "EAL init failed\n");
+
+	argc -= ret;
+	argv += ret;
+
+	if (argc > 1)
+		args_parse(argc, argv);
+
+	init_port();
+
+	nb_lcores = rte_lcore_count();
+
+	if (nb_lcores <= 1)
+		rte_exit(EXIT_FAILURE, "This app needs at least two cores\n");
+
+	RTE_LCORE_FOREACH_SLAVE(lcore_id)
+
+	if (rte_eal_wait_lcore(lcore_id) < 0)
+		break;
+
+	for (port = 0; port < nr_ports; port++) {
+		rte_flow_flush(port, &error);
+		rte_eth_dev_stop(port);
+		rte_eth_dev_close(port);
+	}
+	return 0;
+}
diff --git a/app/test-flow-perf/meson.build b/app/test-flow-perf/meson.build
new file mode 100644
index 0000000000..ec9bb3b3aa
--- /dev/null
+++ b/app/test-flow-perf/meson.build
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Mellanox Technologies, Ltd
+
+# meson file, for building this example as part of a main DPDK build.
+#
+# To build this example as a standalone application with an already-installed
+# DPDK instance, use 'make'
+
+sources = files(
+	'main.c',
+)
diff --git a/app/test-flow-perf/user_parameters.h b/app/test-flow-perf/user_parameters.h
new file mode 100644
index 0000000000..56ec7f47b5
--- /dev/null
+++ b/app/test-flow-perf/user_parameters.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Claus
+ *
+ * This file will hold the user parameters values
+ *
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+/** Configuration **/
+#define RXQs 4
+#define TXQs 4
+#define HAIRPIN_QUEUES 4
+#define TOTAL_MBUF_NUM 32000
+#define MBUF_SIZE 2048
+#define MBUF_CACHE_SIZE 512
+#define NR_RXD  256
+#define NR_TXD  256
diff --git a/config/common_base b/config/common_base
index c31175f9d6..79455bf94a 100644
--- a/config/common_base
+++ b/config/common_base
@@ -1111,3 +1111,8 @@ CONFIG_RTE_APP_CRYPTO_PERF=y
 # Compile the eventdev application
 #
 CONFIG_RTE_APP_EVENTDEV=y
+
+#
+# Compile the rte flow perf application
+#
+CONFIG_RTE_TEST_FLOW_PERF=y
diff --git a/doc/guides/tools/flow-perf.rst b/doc/guides/tools/flow-perf.rst
new file mode 100644
index 0000000000..30ce1b6cc0
--- /dev/null
+++ b/doc/guides/tools/flow-perf.rst
@@ -0,0 +1,69 @@
+..	SPDX-License-Identifier: BSD-3-Clause
+	Copyright 2020 Mellanox Technologies, Ltd
+
+RTE Flow performance tool
+=========================
+
+Application for rte_flow performance testing.
+
+
+Compiling the Application
+=========================
+The ``test-flow-perf`` application is compiled as part of the main compilation
+of the DPDK libraries and tools.
+
+Refer to the DPDK Getting Started Guides for details.
+The basic compilation steps are:
+
+#. Set the required environmental variables and go to the source directory:
+
+	.. code-block:: console
+
+		export RTE_SDK=/path/to/rte_sdk
+		cd $RTE_SDK
+
+#. Set the compilation target. For example:
+
+	.. code-block:: console
+
+		export RTE_TARGET=x86_64-native-linux-gcc
+
+#. Build the application:
+
+	.. code-block:: console
+
+		make install T=$RTE_TARGET
+
+#. The compiled application will be located at:
+
+	.. code-block:: console
+
+		$RTE_SDK/$RTE_TARGET/app/flow-perf
+
+
+Running the Application
+=======================
+
+EAL Command-line Options
+------------------------
+
+Please refer to :doc:`EAL parameters (Linux) <../linux_gsg/linux_eal_parameters>`
+or :doc:`EAL parameters (FreeBSD) <../freebsd_gsg/freebsd_eal_parameters>` for
+a list of available EAL command-line options.
+
+
+Flow performance Options
+------------------------
+
+The following are the command-line options for the flow performance application.
+They must be separated from the EAL options, shown in the previous section, with
+a ``--`` separator:
+
+.. code-block:: console
+
+	sudo ./test-flow-perf -n 4 -w 08:00.0,dv_flow_en=1 --
+
+The command line options are:
+
+*	``--help``
+	Display a help message and quit.
diff --git a/doc/guides/tools/index.rst b/doc/guides/tools/index.rst
index 782b30864e..7279daebc6 100644
--- a/doc/guides/tools/index.rst
+++ b/doc/guides/tools/index.rst
@@ -16,3 +16,4 @@ DPDK Tools User Guides
     cryptoperf
     comp_perf
     testeventdev
+    flow-perf
-- 
2.17.1



More information about the dev mailing list